##############################################################################
##############################################################################
###
### Running command:
###
###   /Library/Frameworks/R.framework/Resources/bin/R CMD check --install=check:HDF5Array.install-out.txt --library=/Library/Frameworks/R.framework/Resources/library --no-vignettes --timings HDF5Array_1.38.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/Users/biocbuild/bbs-3.22-bioc/meat/HDF5Array.Rcheck’
* using R version 4.5.2 (2025-10-31)
* using platform: x86_64-apple-darwin20
* R was compiled by
    Apple clang version 14.0.0 (clang-1400.0.29.202)
    GNU Fortran (GCC) 14.2.0
* running under: macOS Monterey 12.7.6
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘HDF5Array/DESCRIPTION’ ... OK
* this is package ‘HDF5Array’ version ‘1.38.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘HDF5Array’ can be installed ... OK
* checking installed package size ... INFO
  installed size is  9.0Mb
  sub-directories of 1Mb or more:
    extdata   7.7Mb
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking code files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking whether startup messages can be suppressed ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... OK
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... NOTE
Found the following Rd file(s) with Rd \link{} targets missing package
anchors:
  H5SparseMatrix-class.Rd: h5ls
  H5SparseMatrixSeed-class.Rd: h5ls
  HDF5Array-class.Rd: H5File, h5ls
  HDF5ArraySeed-class.Rd: h5ls
  ReshapedHDF5Array-class.Rd: h5ls
  ReshapedHDF5ArraySeed-class.Rd: h5ls
  TENxMatrix-class.Rd: h5ls
  TENxMatrixSeed-class.Rd: h5ls
  dump-management.Rd: h5createDataset, h5ls
  writeHDF5Array.Rd: DelayedArray, h5writeDimnames, h5ls
  writeTENxMatrix.Rd: DelayedMatrix, h5ls
Please provide package anchors for all Rd \link{} targets not in the
package itself and the base packages.
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                       user system elapsed
TENxMatrix-class     80.742 21.409  69.247
writeTENxMatrix      25.581  1.938  30.526
H5ADMatrix-class      4.741  0.488   5.785
TENxMatrixSeed-class  4.124  0.497   5.489
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘run_unitTests.R’

##############################################################################
##############################################################################
###
### Running command:
###
###   /Library/Frameworks/R.framework/Resources/bin/R CMD INSTALL HDF5Array
###
##############################################################################
##############################################################################


* installing to library ‘/Library/Frameworks/R.framework/Versions/4.5-x86_64/Resources/library’
* installing *source* package ‘HDF5Array’ ...
** this is package ‘HDF5Array’ version ‘1.38.0’
** using staged installation
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (HDF5Array)

R version 4.5.2 (2025-10-31) -- "[Not] Part in a Rumble"
Copyright (C) 2025 The R Foundation for Statistical Computing
Platform: x86_64-apple-darwin20

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> require("HDF5Array") || stop("unable to load HDF5Array package")
Loading required package: HDF5Array
Loading required package: SparseArray
Loading required package: Matrix
Loading required package: BiocGenerics
Loading required package: generics

Attaching package: 'generics'

The following objects are masked from 'package:base':

    as.difftime, as.factor, as.ordered, intersect, is.element, setdiff,
    setequal, union


Attaching package: 'BiocGenerics'

The following objects are masked from 'package:stats':

    IQR, mad, sd, var, xtabs

The following objects are masked from 'package:base':

    Filter, Find, Map, Position, Reduce, anyDuplicated, aperm, append,
    as.data.frame, basename, cbind, colnames, dirname, do.call,
    duplicated, eval, evalq, get, grep, grepl, is.unsorted, lapply,
    mapply, match, mget, order, paste, pmax, pmax.int, pmin, pmin.int,
    rank, rbind, rownames, sapply, saveRDS, table, tapply, unique,
    unsplit, which.max, which.min

Loading required package: MatrixGenerics
Loading required package: matrixStats

Attaching package: 'MatrixGenerics'

The following objects are masked from 'package:matrixStats':

    colAlls, colAnyNAs, colAnys, colAvgsPerRowSet, colCollapse,
    colCounts, colCummaxs, colCummins, colCumprods, colCumsums,
    colDiffs, colIQRDiffs, colIQRs, colLogSumExps, colMadDiffs,
    colMads, colMaxs, colMeans2, colMedians, colMins, colOrderStats,
    colProds, colQuantiles, colRanges, colRanks, colSdDiffs, colSds,
    colSums2, colTabulates, colVarDiffs, colVars, colWeightedMads,
    colWeightedMeans, colWeightedMedians, colWeightedSds,
    colWeightedVars, rowAlls, rowAnyNAs, rowAnys, rowAvgsPerColSet,
    rowCollapse, rowCounts, rowCummaxs, rowCummins, rowCumprods,
    rowCumsums, rowDiffs, rowIQRDiffs, rowIQRs, rowLogSumExps,
    rowMadDiffs, rowMads, rowMaxs, rowMeans2, rowMedians, rowMins,
    rowOrderStats, rowProds, rowQuantiles, rowRanges, rowRanks,
    rowSdDiffs, rowSds, rowSums2, rowTabulates, rowVarDiffs, rowVars,
    rowWeightedMads, rowWeightedMeans, rowWeightedMedians,
    rowWeightedSds, rowWeightedVars

Loading required package: S4Vectors
Loading required package: stats4

Attaching package: 'S4Vectors'

The following objects are masked from 'package:Matrix':

    expand, unname

The following object is masked from 'package:utils':

    findMatches

The following objects are masked from 'package:base':

    I, expand.grid, unname

Loading required package: S4Arrays
Loading required package: abind
Loading required package: IRanges

Attaching package: 'S4Arrays'

The following object is masked from 'package:abind':

    abind

The following object is masked from 'package:base':

    rowsum

Loading required package: DelayedArray

Attaching package: 'DelayedArray'

The following objects are masked from 'package:base':

    apply, scale, sweep

Loading required package: h5mread
Loading required package: rhdf5

Attaching package: 'h5mread'

The following object is masked from 'package:rhdf5':

    h5ls

[1] TRUE
> HDF5Array:::.test()
Loading required package: SummarizedExperiment
Loading required package: GenomicRanges
Loading required package: Seqinfo
Loading required package: Biobase
Welcome to Bioconductor

    Vignettes contain introductory material; view with
    'browseVignettes()'. To cite Bioconductor, see
    'citation("Biobase")', and for packages 'citation("pkgname")'.


Attaching package: 'Biobase'

The following object is masked from 'package:SparseArray':

    rowMedians

The following object is masked from 'package:MatrixGenerics':

    rowMedians

The following objects are masked from 'package:matrixStats':

    anyMissing, rowMedians

For native R and reading and writing of H5AD files, an R <AnnData> object, and
conversion to <SingleCellExperiment> or <Seurat> objects, check out the
anndataR package:
ℹ Install it from Bioconductor with `BiocManager::install("anndataR")`
ℹ See more at <https://bioconductor.org/packages/anndataR/>
This message is displayed once per session.
Downloading openssl-3.6.0.tar.gz...
-> https://github.com/openssl/openssl/releases/download/openssl-3.6.0/openssl-3.6.0.tar.gz
Installing openssl-3.6.0...
Installed openssl-3.6.0 to /Users/biocbuild/.pyenv/versions/3.14.0
Downloading readline-8.3.tar.gz...
-> https://pyenv.github.io/pythons/fe5383204467828cd495ee8d1d3c037a7eba1389c22bc6a041f627976f9061cc
Installing readline-8.3...
Installed readline-8.3 to /Users/biocbuild/.pyenv/versions/3.14.0
Downloading Python-3.14.0.tar.xz...
-> https://www.python.org/ftp/python/3.14.0/Python-3.14.0.tar.xz
Installing Python-3.14.0...
python-build: use zlib from xcode sdk

BUILD FAILED (OS X 12.7.6 using python-build 2.6.15)

Inspect or clean up the working tree at /tmp/python-build.20251205055549.69083
Results logged to /tmp/python-build.20251205055549.69083.log

Last 10 log lines:
/usr/bin/install -c -m 755 Modules/_posixshmem.cpython-314-darwin.so /Users/biocbuild/.pyenv/versions/3.14.0/lib/python3.14/lib-dynload/_posixshmem.cpython-314-darwin.so
/usr/bin/install -c -m 755 Modules/_multiprocessing.cpython-314-darwin.so /Users/biocbuild/.pyenv/versions/3.14.0/lib/python3.14/lib-dynload/_multiprocessing.cpython-314-darwin.so
/usr/bin/install -c -m 755 Modules/_ctypes.cpython-314-darwin.so /Users/biocbuild/.pyenv/versions/3.14.0/lib/python3.14/lib-dynload/_ctypes.cpython-314-darwin.so
/usr/bin/install -c -m 755 Modules/_curses.cpython-314-darwin.so /Users/biocbuild/.pyenv/versions/3.14.0/lib/python3.14/lib-dynload/_curses.cpython-314-darwin.so
/usr/bin/install -c -m 755 Modules/_curses_panel.cpython-314-darwin.so /Users/biocbuild/.pyenv/versions/3.14.0/lib/python3.14/lib-dynload/_curses_panel.cpython-314-darwin.so
/usr/bin/install -c -m 755 Modules/_sqlite3.cpython-314-darwin.so /Users/biocbuild/.pyenv/versions/3.14.0/lib/python3.14/lib-dynload/_sqlite3.cpython-314-darwin.so
/usr/bin/install -c -m 755 Modules/_ssl.cpython-314-darwin.so /Users/biocbuild/.pyenv/versions/3.14.0/lib/python3.14/lib-dynload/_ssl.cpython-314-darwin.so
/usr/bin/install -c -m 755 Modules/_hashlib.cpython-314-darwin.so /Users/biocbuild/.pyenv/versions/3.14.0/lib/python3.14/lib-dynload/_hashlib.cpython-314-darwin.so
install: Modules/_hashlib.cpython-314-darwin.so: No such file or directory
make: *** [sharedinstall] Error 71
Timing stopped at: 4565 564.1 1374
Error : installation of Python 3.14.0 failed
Downloading openssl-3.6.0.tar.gz...
-> https://github.com/openssl/openssl/releases/download/openssl-3.6.0/openssl-3.6.0.tar.gz
Installing openssl-3.6.0...
Installed openssl-3.6.0 to /Users/biocbuild/.pyenv/versions/3.14.0
Downloading readline-8.3.tar.gz...
-> https://pyenv.github.io/pythons/fe5383204467828cd495ee8d1d3c037a7eba1389c22bc6a041f627976f9061cc
Installing readline-8.3...
Installed readline-8.3 to /Users/biocbuild/.pyenv/versions/3.14.0
Downloading Python-3.14.0.tar.xz...
-> https://www.python.org/ftp/python/3.14.0/Python-3.14.0.tar.xz
Installing Python-3.14.0...
python-build: use zlib from xcode sdk