bluez-5.62-150400.4.16.1<>,^$d˘ p9|FN '׭pr\nV]?k_܊7"lc):G5˦q4Rx.xa!N?d   5| "=  =GG ^G G G "G "G#G%WG&&G'(P+(+,+(-08-879.7:27=>?@BFGGH GI<GXYZ[\G]0G^bcdefl uGv8wGx0GyLzCbluez5.62150400.4.16.1Bluetooth Stack for LinuxBlueZ provides support for the core Bluetooth layers and protocols.d˘ s390zp34VQSUSE Linux Enterprise 15SUSE LLC GPL-2.0-or-laterhttps://www.suse.com/Hardware/Mobilehttp://www.bluez.orglinuxs390x if [ -x /usr/bin/systemctl ]; then test -n "$FIRST_ARG" || FIRST_ARG="$1" [ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || : for service in bluetooth.service bluetooth-mesh.service ; do sysv_service=${service%.*} if [ ! -e /usr/lib/systemd/system/$service ] && [ ! -e /etc/init.d/$sysv_service ]; then mkdir -p /run/systemd/rpm/needs-preset touch /run/systemd/rpm/needs-preset/$service elif [ -e /etc/init.d/$sysv_service ] && [ ! -e /var/lib/systemd/migrated/$sysv_service ]; then /usr/sbin/systemd-sysv-convert --save $sysv_service || : mkdir -p /run/systemd/rpm/needs-sysv-convert touch /run/systemd/rpm/needs-sysv-convert/$service fi done fi # Avoid restoring outdated stuff in posttrans for _f in 50-bluetooth.conf; do [ ! -f "/etc/modprobe.d/${_f}.rpmsave" ] || \ mv -f "/etc/modprobe.d/${_f}.rpmsave" "/etc/modprobe.d/${_f}.rpmsave.old" || : done [ -x /usr/bin/udevadm ] && /usr/bin/udevadm control --reload || : # todo: check if this is still obeyed / needed with systemd PNAME=bluetooth SUBPNAME= SYSC_TEMPLATE=/usr/share/fillup-templates/sysconfig.$PNAME$SUBPNAME # If template not in new /usr/share/fillup-templates, fallback to old TEMPLATE_DIR if [ ! -f $SYSC_TEMPLATE ] ; then TEMPLATE_DIR=/var/adm/fillup-templates SYSC_TEMPLATE=$TEMPLATE_DIR/sysconfig.$PNAME$SUBPNAME fi SD_NAME="" if [ -x /bin/fillup ] ; then if [ -f $SYSC_TEMPLATE ] ; then echo "Updating /etc/sysconfig/$SD_NAME$PNAME ..." mkdir -p /etc/sysconfig/$SD_NAME touch /etc/sysconfig/$SD_NAME$PNAME /bin/fillup -q /etc/sysconfig/$SD_NAME$PNAME $SYSC_TEMPLATE fi else echo "ERROR: fillup not found. This should not happen. Please compare" echo "/etc/sysconfig/$PNAME and $TEMPLATE_DIR/sysconfig.$PNAME and" echo "update by hand." fi # We need the bluez systemd service enabled at any time. It won't start up # on its own, as it is triggered by udev in the end (bnc#796671) /usr/bin/systemctl enable bluetooth.service 2>&1 || : /usr/bin/systemctl daemon-reload >/dev/null 2>&1 || : test -n "$FIRST_ARG" || FIRST_ARG="$1" if [ "$FIRST_ARG" -eq 0 -a -x /usr/bin/systemctl ]; then # Package removal, not upgrade /usr/bin/systemctl --no-reload disable bluetooth.service bluetooth-mesh.service || : ( test "$YAST_IS_RUNNING" = instsys && exit 0 test -f /etc/sysconfig/services -a \ -z "$DISABLE_STOP_ON_REMOVAL" && . /etc/sysconfig/services test "$DISABLE_STOP_ON_REMOVAL" = yes -o \ "$DISABLE_STOP_ON_REMOVAL" = 1 && exit 0 /usr/bin/systemctl stop bluetooth.service bluetooth-mesh.service ) || : fi test -n "$FIRST_ARG" || FIRST_ARG="$1" if [ $1 -eq 0 ]; then # Package removal for service in bluetooth.service bluetooth-mesh.service ; do sysv_service="${service%.*}" rm -f "/var/lib/systemd/migrated/$sysv_service" || : done fi if [ -x /usr/bin/systemctl ]; then /usr/bin/systemctl daemon-reload || : fi if [ "$FIRST_ARG" -ge 1 ]; then # Package upgrade, not uninstall if [ -x /usr/bin/systemctl ]; then ( test "$YAST_IS_RUNNING" = instsys && exit 0 test -f /etc/sysconfig/services -a \ -z "$DISABLE_RESTART_ON_UPDATE" && . /etc/sysconfig/services test "$DISABLE_RESTART_ON_UPDATE" = yes -o \ "$DISABLE_RESTART_ON_UPDATE" = 1 && exit 0 /usr/bin/systemctl try-restart bluetooth.service bluetooth-mesh.service ) || : fi fi@h@ 8@O@80 &1 \8@HpB_mi!KD"'c_?L<&PKU%r "$iFV1 *; A큤A큤AA큤AA큤A큤A큤A큤Ad˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˗d˘^H9ag'^mjayd˗d˗bag'`fZBT_TWG)_Tag'PؕQ_Tag'PؕPؕTUU_TUPؕa!WXK7Xd˗bd˗d˘Hjd˗d˗d˗d˗d˗d˗d˗d˗d˗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-5.62-150400.4.16.1.src.rpmbluezbluez(s390-64)bluez-audiobluez-hcidumpbluez-utilsconfig(bluez)obexd-client  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@    /bin/sh/bin/sh/bin/sh/bin/sh/bin/shconfig(bluez)libasound.so.2()(64bit)libasound.so.2(ALSA_0.9)(64bit)libc.so.6()(64bit)libc.so.6(GLIBC_2.10)(64bit)libc.so.6(GLIBC_2.15)(64bit)libc.so.6(GLIBC_2.17)(64bit)libc.so.6(GLIBC_2.2)(64bit)libc.so.6(GLIBC_2.2.3)(64bit)libc.so.6(GLIBC_2.25)(64bit)libc.so.6(GLIBC_2.28)(64bit)libc.so.6(GLIBC_2.3)(64bit)libc.so.6(GLIBC_2.3.2)(64bit)libc.so.6(GLIBC_2.3.3)(64bit)libc.so.6(GLIBC_2.3.4)(64bit)libc.so.6(GLIBC_2.4)(64bit)libc.so.6(GLIBC_2.7)(64bit)libc.so.6(GLIBC_2.8)(64bit)libc.so.6(GLIBC_2.9)(64bit)libdbus-1.so.3()(64bit)libdbus-1.so.3(LIBDBUS_1_3)(64bit)libdl.so.2()(64bit)libdl.so.2(GLIBC_2.2)(64bit)libglib-2.0.so.0()(64bit)libicalvcal.so.3()(64bit)libjson-c.so.3()(64bit)libreadline.so.7()(64bit)libudev.so.1()(64bit)libudev.so.1(LIBUDEV_183)(64bit)libudev.so.1(LIBUDEV_196)(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)systemdsystemdsystemdsystemd5.62-150400.4.16.13.0.4-14.6.0-14.0-15.2-14.14.3dE@dZ@c@cb!@ay?@aexa``P@_`]@]\@\I\ `[H@[4ZK@Zp^@ZF.@Z/YcYjY_wYOY9<@Y(Y XZXXX@W W@WgWV@WI@W @@VV$@V3[V +UpUUc@U@UUU@UTи@T@T{T`jlee@suse.comjlee@suse.comjlee@suse.comjlee@suse.commwilck@suse.comacho@suse.comacho@suse.comacho@suse.comacho@suse.comacho@suse.comacho@suse.comacho@suse.comacho@suse.comacho@suse.comacho@suse.comacho@suse.comseife+obs@b1-systems.comacho@suse.comacho@suse.comnormand@linux.vnet.ibm.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.commsuchanek@suse.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comtchvatal@suse.comseife+obs@b1-systems.comseife+obs@b1-systems.comjengelh@inai.deseife+obs@b1-systems.comfbui@suse.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comdimstar@opensuse.orgseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comrguenther@suse.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.comseife+obs@b1-systems.com- Add sdpd-Fix-leaking-buffers-stored-in-cstates-cache.patch sdpd: Fix leaking buffers stored in cstates cache (bsc#1192760)(CVE-2021-41229)- Add avrcp-Fix-crash-while-handling-unsupported-events.patch avrcp: Fix crash while handling unsupported events (bsc#1210398)(CVE-2023-27349)- Add mgmt-tester-Fix-null-dereference-issue-reported-by-s.patch - This patch fixes the null dereference reported by the scan-build. (bsc#1204426)(CVE-2022-3563)- Add shared-gatt-server-Fix-heap-overflow-when-appending-.patch - The code shall check if the prepare writes would append more the allowed maximum attribute length. (bsc#1194704 CVE-2022-0204)- Install modprobe.conf files to %_modprobedir (bsc#1196275, jsc#SLE-20639)- update to version 5.62 (JIRA-SLE-18497): * Fix issue with handling truncation when loading LTKs. * Fix issue with accepting Exchange MTU on EATT bearer. * Fix issue with clearing DeviceLost timers on power down. * Fix issue with AVCTP browsing channel and missing ERTM. * Fix issue with AVDTP and local SEID pool for each adapter. * Add support for BR/EDR and LE connection failure reasons. - refresh patch hcidump-fixed-hci-frame-dump-stack-buffer-overflow.patch- update to version 5.61 (JIRA-SLE-18497): * Fix issue with A2DP while waiting for command response. * Fix issue with A2DP when SetConfiguration fails. * Fix issue with device removal handling. * Fix issue with storing discoverable setting. * Add support for Central Address Resolution characteristic. * Add support for admin policy plugin. - fix bluez-auto-enable-devices subpackage (boo#1177845) - add bluez-test-2to3.diff to get rid of python2 dependency - remove notification message from bluez-deprecated package. also boo#1188660 - refresh other patches- update to 5.60 (JIRA-SLE-18497): * Fix issue with reading from RFKILL device node. * Fix issue with AVDTP and parsing capabilities. * Fix issue with UnregisterApplication handling. * Fix issue with RegisterProfile if UUID already exists. * Fix issue with GATT client attribute read with offset. * Fix issue with non-discoverable device and advertising monitor. - update to 5.59: * Fix issue with string to UUID-32 conversion. * Fix issue with connect request if SDP search failed. * Fix issue with accepting invalid AVDTP capabilities. * Fix issue with unregister handling of AVRCP player. * new tool: mesh-cfgtest * new manpages: btmon.1, bluetooth-meshd.8 - update to 5.58: * Fix issue with usage of deprecated GLib functions. - version 5.57: * Fix issue with handling GATT notification PDU parsing. * Fix issue with registering DIS without a valid source. * Fix issue with removing remote SEPs when loading from cache. - update to 5.56: * Fix issue with setting AVDTP disconnect timer. * Fix issue with AVDTP not sending GetCapabilities. * Fix issue with AVDTP connecting using streaming mode. * Fix issue with handling A2DP and remote SEP disappearing. * Fix issue with handling session of A2DP channels. * Fix issue with GATT and handling device removal. * Fix issue with GATT not accepting multiple requests. * Fix issue with HID report value callback registration. * Add support for new advertising management command. * Add support for battery D-Bus interface. * removed obsolete bccmd - remove obsolete upstreamed patches: shared-gatt-server-Fix-not-properly-checking-for-sec.patch (bsc#1186463 CVE-2021-0129) gatt-Fix-potential-buffer-out-of-bound.patch (bsc#1187165 CVE-2021-3588) shared-gatt-db-Introduce-gatt_db_attribute_set_fixed.patch (bsc#1187165 CVE-2021-3588) gatt-Make-use-of-gatt_db_attribute_set_fixed_length.patch (bsc#1187165 CVE-2021-3588) - refresh other patches- Add gatt-Fix-potential-buffer-out-of-bound.patch * When client features is read check if the offset is within the cli_feat bounds. (bsc#1187165 CVE-2021-3588) - Add shared-gatt-db-Introduce-gatt_db_attribute_set_fixed.patch * This enables user to inform if an attribute has a fixed length so it can automatically perform bounds checking. (bsc#1187165 CVE-2021-3588) - Add gatt-Make-use-of-gatt_db_attribute_set_fixed_length.patch * This makes use of gatt_db_attribute_set_fixed_length so the database is aware of the length of the values and perform bounds checking. (bsc#1187165 CVE-2021-3588)- Add shared-gatt-server-Fix-not-properly-checking-for-sec.patch * Fix not properly checking for secure flags (bsc#1186463 CVE-2021-0129 CVE-2020-26558)- update to 5.55: * Fix issue with handling security level for HoG. * Fix issue with handling HIDSDPDisable attribute. * Fix issue with handling HID virtual cable unplug. * Fix issue with handling HID channel disconnect order. * Fix issue with handling AVDTP delay reporting states. * Fix issue with handling AVRCP notification events. * Fix issue with handling AVRCP list player attributes. * Fix issue with handling AVRCP category 1 player settings. * Fix issue with handling AVRCP media player passthrough bitmask. * Fix issue with handling HFP 1.7 default features. * Fix issue with handling GATT disconnecting handling. * Fix issue with handling GATT database hash. * Fix issue with handling service changed characteristic. * Fix issue with handling read of multiple characteristic values. * Fix issue with handling Just-Works auto-accept pairing. * Fix issue with handling authentication of bonded devices. * Fix issue with handling L2CAP streaming mode for AVDTP. * Fix issue with handling SysEx parser for MIDI support. * Fix issue with handling configured scan parameter values. * Fix issue with handling temporary devices removal. * Fix issue with handling advertising flags. - update to bluez-5.54: * Fix issue with HOGP to accept data only from bonded devices. * Fix issue with A2DP sessions being connected at the same time. * Fix issue with class UUID matches before connecting profile. * Add support for handling MTU auto-tuning option for AVDTP. * Add support for new policy for Just-Works repairing. * Add support for Enhanced ATT bearer (EATT). - update to bluez-5.53: * Fix issue with handling unregistration for advertisment. * Fix issue with A2DP and handling recovering process. * Fix issue with udpating input device information. * Add support for loading blocked keys. - update to version 5.52: * Fix issue with AVDTP session disconnect timeout handling. * Mark media endpoint APIs as stable interfaces. - update to version 5.51: * Fix issue with first agent not being registered as default. * Fix issue with loading devices without Service Changed CCC. * Fix issue with GATT client and extended property reading. * Fix issue with handling GATT client invalid read behavior. * Fix issue with handling GATT disconnect handler removal. * Fix issue with missing GATT/GAP service records for SDP. * Fix issue with checking SDP continuation state length. * Fix issue with HID device removal on HoG disconnect. * Fix issue with AVDTP and session destroy handling. * Fix issue with AVCTP and output MTU accounting. * Fix issue with AVRCP and creating media items. * Add support for GATT database caching feature. * Add experimental support for Bluetooth Mesh Profile. - update to version 5.50: - Fix issue with GATT and reading long values. - Fix issue with GATT and reading multiple includes. - Fix issue with GATT and service changes when offline. - Fix issue with handling secondary service discovery. - Fix issue with handling persistency of CCC values. - Fix issue with handling Mesh session on disconnection. - Fix issue with handling Mesh proxy PDU SAR message length. - Fix issue with handling Mesh default heartbeat TTL value. - Add support for Mesh node-reset operation handling. - Add support for GATT authorization request handling. - Add support for GATT minimum key size requirements. - Add support for GATT server and included services. - Add support for handling additional advertising data. - Add support for handling separate discoverable state. - Add support for enabling HFP version 1.7 features. - Add support for dedicated Bluetooth logging daemon. - update to version 5.49: This is mostly a bug fix release, with fixes to features such as AVCTP, OBEX, GATT and Mesh. There are however some notable new features also, such as improved heartbeat management support in meshctl as well as a new experimental ConnectDevice D-Bus method on the Adapter interface, which can be used for quick device object creation for testing purpose or when information about the device has been received over some Out-of-Band channel. - Add --enable-external-ell to actually make use of pkgconfig(ell). - remove obsolete upstreamed patches: * 0001-obexd-use-AM_LDFLAGS-for-linking.patch * 0001-core-Fixes-order-InterfaceAdded.patch * tools-Fix-build-after-y2038-changes-in-glibc.patch * hcidump-Fix-set_ext_ctrl-global-buffer-overflow.patch * 0001-btmon-fix-segfault-caused-by-buffer-over-read.patch * 0002-btmon-fix-segfault-caused-by-buffer-over-read.patch * 0003-btmon-fix-segfault-caused-by-buffer-over-read.patch * 0004-btmon-Fix-crash-caused-by-integer-underflow.patch * 0005-btmon-fix-stack-buffer-overflow.patch * 0006-btmon-fix-multiple-segfaults.patch * 0007-btmon-fix-segfault-caused-by-integer-underflow.patch * 0008-btmon-fix-segfault-caused-by-integer-undeflow.patch * 0009-btmon-fix-segfault-caused-by-buffer-over-read.patch * 0010-btmon-fix-segfault-caused-by-buffer-overflow.patch * 0011-btmon-fix-segfault-caused-by-integer-underflow.patch * 0012-btmon-fix-segfault-caused-by-buffer-over-read.patch - use autopatch, spec-cleaner - refresh other patches- Add tools-Fix-build-after-y2038-changes-in-glibc.patch * The 32-bit SIOCGSTAMP has been deprecated. Use the deprecated name to fix the build.(bsc#1156544)- Add hcidump-Fixed-malformed-segment-frame-length.patch * Ensure the L2CAP SDUs whose length field match the actual frame length.(bsc#1013712)(CVE-2016-9798) - Modify bluez.changes: Remove (bsc#1013712)(CVE-2016-9798) tag from patch hcidump-Add-assoc-dump-function-assoc-date-length-ch.patch- Add hcidump-Add-assoc-dump-function-assoc-date-length-ch.patch * amp_assoc_dump() didn't check the length of amp assoc struct. (bsc#1013712)(CVE-2016-9798)(bsc#1013708)(CVE-2016-9797) Add hcidump-Fix-memory-leak-with-malformed-packet.patch * Do not allow to read more than allocated data buffer size. (bsc#1015171)(CVE-2016-9917) - Refresh patches: patches/bluez-cups-libexec.patch patches/bluez-5.45-disable-broken-tests.diff - fix bluez.changes: add (bsc#1013893)(CVE-2016-9802) tag for last log.- Add:btmon: multiple memory management vulnerabilities fixed Multiple different memory management vulnerabilities were discovered in btmon while fuzzing it with American Fuzzy Lop. Purpose of this fuzzing effort was to find some bugs in btmon, analyse and fix them but also try to exploit them. Also goal was to prove that fuzzing is low effort way to find bugs that could end up being severe ones. Most common weakness appeared to be buffer over-read which was usually caused by missing boundary checks before accessing array. Integer underflows were also quite common. Most interesting bug was simple buffer overflow that was actually discovered already couple years ago by op7ic: https://www.spinics.net/lists/linux-bluetooth/msg68898.html but it was still not fixed. This particular vulnerability ended up being quite easily exploitable if certain mitigation technics were disabled.(bsc#1015173)(CVE-2016-9918)(bsc#1013893)(CVE-2016-9802) 0001-btmon-fix-segfault-caused-by-buffer-over-read.patch 0002-btmon-fix-segfault-caused-by-buffer-over-read.patch 0003-btmon-fix-segfault-caused-by-buffer-over-read.patch 0004-btmon-Fix-crash-caused-by-integer-underflow.patch 0005-btmon-fix-stack-buffer-overflow.patch 0006-btmon-fix-multiple-segfaults.patch 0007-btmon-fix-segfault-caused-by-integer-underflow.patch 0008-btmon-fix-segfault-caused-by-integer-undeflow.patch 0009-btmon-fix-segfault-caused-by-buffer-over-read.patch 0010-btmon-fix-segfault-caused-by-buffer-overflow.patch 0011-btmon-fix-segfault-caused-by-integer-underflow.patch 0012-btmon-fix-segfault-caused-by-buffer-over-read.patch- Add hcidump-fixed-hci-frame-dump-stack-buffer-overflow.patch to replace CVE-2016-9800-tool-hcidump-Fix-memory-leak-with-malformed-packet.patch (PATCH-FIX-UPSTREAM)(bsc#1013721)(CVE-2016-9800) Add hcidump-Fix-set_ext_ctrl-global-buffer-overflow.patch to fix global buffer overflow (PATCH-FIX-UPSTREAM) (bsc#1013732)(CVE-2016-9801) - Fix %ifarch range.- add 0001-core-Fixes-order-InterfaceAdded.patch (boo#1101119) to fix headset connect after suspend/resume- Add lost patches for RPi3 bluetooth support (bsc#995059)(bsc#1094902) 0001-rpi3-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch 0002-rpi3-Move-the-43xx-firmware-into-lib-firmware.patch- Add CVE-2016-9800-tool-hcidump-Fix-memory-leak-with-malformed-packet.patch * Fix hcidump memory leak in pin_code_reply_dump(). (bsc#1013721)(CVE-2016-9800) CVE-2016-9804-tool-hcidump-Fix-memory-leak-with-malformed-packet.patch * Fix hcidump buffer overflow in commands_dump(). (bsc#1013877)(CVE-2016-9804)- Add disable_some_obex_tests.patch bypass boo#1078285 for PowerPC- update to version 5.48: This release brings many fixes and feature enhancements. Some notable enhancements include support for devices with the BLE battery service, as well as improved Mesh support in the meshctl tool. Several previously experimental D-Bus APIs have now been marked as stable, notably the Advertising Manager API as well as the AquireWrite & AquireNotify GATT APIs. As far as fixes go, these can be found in many areas of the stack, including A2DP, AVCTP, device discovery, Mesh, and GATT.- add 0001-obexd-use-AM_LDFLAGS-for-linking.patch - document systemd dependency during %post- update to version 5.47: This release contains various fixes to GATT, A2DP and BR/EDR vs LE bearer handling. There’s also a notable SDP fix for CVE-2017- 1000250 (part of the recently announced BlueBorne vulnerabilities). Feature-wise, there’s now support for adding the appearance and local name to advertising data through the Advertising D-Bus interface. The btmon tool is now also able to better decode most Bluetooth 5.0 HCI commands and events. The Bluetooth Mesh Profile specification was released recently, and this BlueZ release comes with initial support for it in the form of a new meshctl tool. Using this tool it’s possible to provision mesh devices through the GATT Provisioning Bearer (PB-GATT), as well as communicate with them (e.g. configure them) using the GATT Proxy protocol.- update to version 5.46: * Fix issue with handling ATT over BR/EDR connections. * Fix issue with SDP browsing cleanup after connection. * Fix issue with pointer dereference and OPP Put request. * Fix issue with identity address updates during pairing. * Fix issue with not removing services that had disappeared. * Add support for improved discovery of included services. * Add support for simplified characteristics discovery. * Add support for GATT caching configuration option. * Add experimental support for AcquireWrite and AcquireNotify.- enable sixaxis plugin- Add %post/%postun to bluez-auto-enable-devices so the settings change takes effect (boo#1039476)- add bluez-auto-enable-devices subpackage with main.conf which auto-enables all devices (boo#1039476)- add bluez-5.45-disable-broken-tests.diff to disable two broken tests (reported upstream but not yet fixed)- update to version 5.45: This is mostly a bugfix release with fixes in ATT, GATT, OBEX and AVDTP. Feature-wise there are some new things as well, such as btmon support decoding Bluetooth 5.0 HCI commands and events.- make testsuite run non-parallel (it has problems with running parallel checks) and quiet- update to version 5.44: Most fixes are LE (specifically GATT) related, however some other areas are affected as well. Feature-wise, there’s a new MIDI plugin and support for using single-mode (LE-only) controllers that lack a public address. E.g. any nRF5x controller running a MyNewt or Zephyr based firmware falls into this category. - packaging: add "--enable-midi", "--enable-deprecated" TODO: package deprecated tools into separate package to prepare removal some time in the future - rebase bluez-cups-libexec.patch- Set the cupsdir directly with patch instead of mv and seds: * bluez-cups-libexec.patch - Replace requirements by the pkgconfig counterparts * this should solve out the problem with builcycle on Factory - Ran over with spec-cleaner- update to version 5.43: This is almost purely a bug-fix release with fixes to HoG, ATT and PAN. There’s also a fix for a regression in 5.42 that caused connection failures for external profiles like OBEX. Feature-wise there’s one notable addition: LE privacy. By enabling this in main.conf it’s now possible to make BlueZ generate a local Identity Resolving Key (IRK) and use Resolvable Private Addresses (RPAs) for itself.- update to version 5.42: The major API change with this release is that the GATT D-Bus API is no longer marked as experimental.This should hopefully encourage the creation of more applications using it. Feature- wise, btmon received support for decoding full mgmt message traces - a feature that is available in the bluetooth-next kernel tree, i.e. on its way to the 4.9 kernel release. In addition to these changes, this release contains also fixes in areas such as PBAP, transport selection (BR/EDR vs LE), ATT and A2DP.- Update descriptions a bit. Adjust RPM groups for what is used in openSUSE normally. Drop archaic %clean section. Drop --with-pic which is only for (unbuilt) static libs.- update to version 5.41: BlueZ 5.41 is purely a bug-fix release targeting areas such as GATT, AVRCP, OBEX and device discovery filters. The GATT D-Bus API is now starting to be stable enough that this will likely be the last release where it is flagged as experimental. - fix build with older distributions that don't have %_userunitdir ins systemd-rpm-macros- Don't require systemd-devel but systemd-rpm-macros (bsc#983167) Bluez simply needs to know where the systemd default paths are, at build time. For that there's no need to build-require systemd or systemd-devel (and pull all theirs dependencies). Instead build-require systemd-rpm-macros, which has much less dependencies.- update to version 5.40: This is mostly a bug fix release fixing issues with GATT, paired devices and connection handling (particularly for accepting connections through the Profile D-Bus interface). One new feature is the ability to use btmon for reading HCI logs from a TTY device. Right now the creation of this kind of logs is available with Zephyr in the form of a special console logging mode (more information available here https://www.zephyrproject.org/doc/board/arduino_101_ble.html#getting-hci-traces>). The format of the protocol is a slight modification of what btmon normally receives from the kernel monitor sockets, and is documented in doc/btsnoop.txt).- update to version 5.39: This is almost entirely a bug fix release with important fixes to GATT, HoG, AVRCP & A2DP. - install gatttool, needed for bluetooth 4.0 devices (boo#970628)- update to version 5.38: This release has lots of updates and fixes to the GATT D-Bus API. It should be working considerably better now. A key change to the GATT D-Bus API is that it is now fully conforming to the word of the D-Bus Object Manager specification. Instead of registering each service individually with an Object Manager interface per service path, all application services are now grouped together through a single RegisterApplication call. The details can be found in gatt-api.txt. Besides the D-Bus API change there are also numerous fixes to GATT functionality in general. Other areas that received fixes in this release are OBEX, AVRCP and 128-bit UUID handling. Feature-wise there isn’t anything groundbreaking, but a notable update is support for the Start Limited Discovery command in the btmgmt tool (this feature debuted with the 4.5 kernel release). * Fix issue with stack overflow and UUID handling. * Fix issue with ObjectManager interface and GATT. * Fix issue with GATT database and error handling. * Fix issue with GATT client notifications. * Fix issue with GATT object ordering. * Fix issue with GATT default MTU exchange. * Fix issue with device attribute clearing. * Fix issue with AVRCP capabilities request.- update to version 5.37: * Fix issue with registering external profiles. * Fix issue with connecting external profiles. * Fix issue with GATT service changed handling. * Fix issue with not emitting GattServices update. * Convert to unified HID over GATT profile support. * Convert to KeyboardDisplay as default IO capability. * Install btattach utility by default.- update to version 5.36: This release consists for the most part of bug fixes that target areas such as PBAP, AVRCP and GATT. Feature-wise a notable change is btmon support for vendor diagnostic messages which will be debuting with the 4.4 Linux kernel release. This feature will allow e.g. LMP tracing with specific controllers. For now there is preliminary support for Intel and Broadcom based controllers. - update dbus-devel buildrequires from configure.ac - remove obsolete bluez-no-duplicate-test-names.patch- update to version 5.35: This release contains bugfixes to areas such as GATT, OBEX, HoG and AVRCP. From now on bluetoothd will cache more information of remote GATT databases and thereby avoid unnecessary rediscovery of remote services. A noteworthy new feature is the ability to configure bluetoothd to automatically enable (power on) all new adapters. One use of this is to replace unreliable "hciconfig hci0 up" commands that some distributions use in their init/udev scripts. The feature can be enabled by having "AutoEnable=true" under the "[Policy]" section of /etc/bluetooth/main.conf- Add bluez-no-duplicate-test-names.patch: Fix test suite when running against GLIB 2.45.x (test names are not to be used duplicated).- update to version 5.34: This release fixes a fairly important bug for the GATT D-Bus interface where automatic reconnections would not always occur for the client role. There’s also a fix for a missing attribute in PBAP & MAP SDP records as well as a couple of audio related fixes. A new feature in this release is Media Player Selection support for the Target role of AVRCP (the Controller role already had this).- update to version 5.33: This release contains mostly bugfixes, particularly in areas such as the audio plugin, GATT and OBEX. The main feature additions are in the the emulator code which received improvelents to LE features. There’s also a new tool for testing the recently released Eddystone protocol from Google.- update to version 5.32: This is mostly a bug fix release rather than including many new features. The fixes fall in several different areas, including OPP, ATT and advertising (instance number handling in particular). There’s also a fix for handling a sudden disconnect when a connection setup process hasn’t yet completed. The one notable feature this release has is the ability to select between letting the stack handle ATT security elevation or doing the respective error handling in higher layers.- update to version 5.31 Fixes to many different areas, including networking, GATT, HID, A2DP and AVRCP. Feature-wise we’ve got support for security flags for the GATT database, allowing fine-grained security level control for D-Bus clients using the GATT D-Bus API. We’ve also got a new experimental device discovery filter interface which allows filtering for a specific remote service, RSSI threshold or transport (LE vs. BR/EDR). Another new experimental interface is for LE advertising, which also brings the LE peripheral role closer to feature completion on a D-Bus level - remove obsolete bluez-5.30-disable-broken-tests.diff- update to version 5.30 The highlight of this release is the completion of the GATT D-Bus APIs. We’ve now got both the client and server functionality in place, however it’s still behind the -E (--experimental) command line switch. The API is documented in doc/gatt-api.txt and there are several test tools for it in the tree (even bluetoothctl has support for it). Another new (and still experimental) D-Bus API that debuts with this release is one for managing LE Advertising, i.e. acting in peripheral role. The API is documented in doc/advertising-api.txt. Besides the new features, there are several fixes to AVCTP, AVDTP & AVRCP. There’s also a fix for C++ compiler compatibility with the library headers as well as a fix for device information not being stored in certain corner cases. - add bluez-5.30-disable-broken-tests.diff to fix test suite - remove -fstack-reuse=none workaround - remove 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch- Build the testsuite with -fstack-reuse=none to workaround broken test setup. [bnc#923768]- update to version 5.29 This is a comparatively large release with over a month and 475 commits since 5.28. There have been lots of fixes to the Android side. Our internal GATT library (used both by ‘normal’ BlueZ as well as the Android version) received lots of updates for this release. Other notable changes are a fix for AVCTP key repeat timeout as well as added support for the Multi Profile Specification (MPS). - add 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch from bluez-devel for fixing test case failure (will be included in next bluez release)- update to version 5.28 Here’s the first BlueZ release in 2015. Most of the changes since the last one are bug fixes, but there’s actually quite many of them this time, including: * Fixes to GATT service discovery & probing * Fix for bearer selection with dual-mode devices * Fix potential crash when removing devices * Fix issue with incomplete names in EIR data * Fix parsing GATT name characteristics * Fix AVCTP long press & key repetition handling * Fixes for GATT notification handling Besides bug fixes we’ve now also got more extensive unit tests for new GATT code as well as better HCI decoders in btmon for some less used 4.1 and 4.2 features. The hid2hci tool gained support for CSR 8510 A10 devices and the hex2hcd tool received a complete rewrite with better command handling.- update to version 5.27 Here comes the traditional x-mas release! BlueZ 5.27 consists mostly of bug fixes to areas such as GATT and mgmt (the interface through which bluetoothd talks to the kernel). The emulation framework has also received many new features, paving the way for more extensive test automation.- update to version 5.26 This release is for the most part a bug-fix release with fixes in A2DP and OBEX related functionality, but there’s also an added features for get/set reports for HID over GATT as well as Phonebook Access Profile 1.2 support The Bluetooth 4.2 specification went public in early December and BlueZ 5.26 is the first release with support for its features. Perhaps the most notable one of these is Low Energy Secure Connections which will require a 3.19 or newer kernel. This feature brings LE pairing to the same level of security as it has been for BR/EDR. LE SC also brings along with it so-called cross-transport pairing, which means that you only need to pair once over LE or BR/EDR to get the necessary keys for both transports between two dual-mode devices.- update to version 5.25 This release contains various improvements to MAP and PBAP support. There are also various GATT related fixes. We’ve also got a fix for a race condition which could occasionally cause LE connection/pairing failures. The fix will work for kernels from 3.13 onward (for older kernels a proper fix isn’t really feasible). - packaging: remove obsolete README.SUSE and README.packagers/bin/sh/bin/sh/bin/sh/bin/shbluez-audiobluez-hcidumpbluez-utilsobexd-clients390zp34 1691064333  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG5.62-150400.4.16.15.62-150400.4.16.13.365.623.365.62-150400.4.16.15.62  3.365.03.365.0 bluetooth.confmodprobe.d50-bluetooth.confbluemoonbluetoothctlbtattachbtmonhex2hcdl2pingmesh-cfgclientmesh-cfgtestmeshctlmpris-proxybluetoothbluetooth-meshdbluetoothdobexdbluetooth-mesh.servicebluetooth.serviceudevhid2hcirules.d97-hid2hci.rulesbluetoothpluginssixaxis.soorg.bluez.obex.serviceorg.bluez.servicebluezAUTHORSChangeLogREADMEREADME-mesh.SUSEbluetooth-mesh.confdbus-apisadapter-api.txtadvertising-api.txtagent-api.txtassigned-numbers.txtbtsnoop.txtdevice-api.txtgatt-api.txthealth-api.txtinput-api.txtmedia-api.txtmgmt-api.txtnetwork-api.txtobex-agent-api.txtobex-api.txtpics-opp.txtpixit-opp.txtprofile-api.txtpts-opp.txtsap-api.txtsettings-storage.txtsupported-features.txttest-coverage.txttest-runner.txtmain.conforg.bluez.mesh.servicebluezCOPYINGbtattach.1.gzbtmon.1.gzhid2hci.1.gzl2ping.1.gzrctest.1.gzbluetooth-meshd.8.gzbluetoothd.8.gz_bluetoothctlbluetooth/etc/dbus-1/system.d//lib//lib/modprobe.d//usr/bin//usr/lib//usr/lib/bluetooth//usr/lib/systemd/system//usr/lib/udev//usr/lib/udev/rules.d//usr/lib64//usr/lib64/bluetooth//usr/lib64/bluetooth/plugins//usr/share/dbus-1/services//usr/share/dbus-1/system-services//usr/share/doc/packages//usr/share/doc/packages/bluez//usr/share/doc/packages/bluez/dbus-apis//usr/share/licenses//usr/share/licenses/bluez//usr/share/man/man1//usr/share/man/man8//usr/share/zsh/site-functions//var/lib/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.suse.de/SUSE:Maintenance:30122/SUSE_SLE-15-SP4_Update/bb66a617767ee7f2d2e1ad0cb3d8a13c-bluez.SUSE_SLE-15-SP4_Updatedrpmxz5s390x-suse-linux  exported SGML document, ASCII textdirectoryASCII textELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=98807efc516923c7b0dd6f79cb94a1a8aa48ca7e, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=4841439a2d6a8c766614d361e39b5b7e68a4fd57, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=8c5c9e7dac9b7c2de7e41e59c47a60579ee6705a, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=8a1b47770fb9ed26ab3b059c7464d6965e76dc00, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=61ee6beb5cca1707ebc109ed779d59b6fbf3d7d3, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=8f389638e4999fee3dbc3a5358663a99fd0e6353, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=7a89eb8454d06b821ac68b1d6ddc749c1e50d302, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=a4d50e5a0c667cf84a782da679ea9c1b344e6144, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=6a2e383d42197e7379662b7a2eb44433a63658dc, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=15479e9ba51b88340fe4ee0aab0193e7e8b4f7f3, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=9928ee4ab0053099b28c96edd93c62ba71ccd425, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=41e27856a8ef7cae465e8b3b810e7240cc48e9c5, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=a40f07818f295b572568332fa33fd09ccb3d0614, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=89adde67b0b6c29f6ce0903926076f6b7900a5b7, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=6fce8a76bcb429e4fed2b6d626f57e6022fc5bf9, strippedUTF-8 Unicode textC source, ASCII texttroff or preprocessor input, ASCII text (gzip compressed data, max compression, from Unix)).3CO[ap  RRRRRRR RRRRRRR RRRRRRRRRRRR RRR!R"RRRRRRRR R RRRRRR RRRRR RRRRRRR R RR RRRR RRRRRRRR R RR RRR RRRRRRR RRRRRRRR RRRRRRRRRR R RR RRRR RRRR RRRR RRR RRRRRRRRRRRR RRRR RRRRRR!RR R RR!RRR R R %Ջ]# Migration of modprobe.conf files to _modprobedir for _f in 50-bluetooth.conf; do [ ! -f "/etc/modprobe.d/${_f}.rpmsave" ] || \ mv -fv "/etc/modprobe.d/${_f}.rpmsave" "/etc/modprobe.d/${_f}" || : done/bin/shsbcutf-82e40bb3f277860306ff6b821cd588b423b87ccfc9f1e384b48c704eb20433cbe? 7zXZ !t/]"k%a}R]RW;ߜJXȖ(!ƱIfD+cj{ɾrtQSmtA5l#YzOmi܉+WР fyrsu~xD_eľG7s+؎g4XA8c+r(WXjL Zsu8 )a_2IAneǧ̕;)^ꇦjvw7%0i )gYs>Y&M (=Fn#|ˑ5Mfr~ $ސ/ζlA d N=űЧzOosLv&.hD`*Pώ{V![ښ$vvQ3?q'N#IZQxAmt򦔩2Ӟw3ܡEX6{x{H1V;~/l<k)W ~IƹKB6;R1OIks'lCB07>Fuo?|*HF? 6MiޕfgNY d/.^.p0e3hP PR_r=IQn{A$G1b3њVLs¥-F6̟UG3^l~E$U+xե^2Pj@]֖ha>14ˠSX1b{~*OECꍲS=4žK2?cűC ACbhoR=#oe!t]QtR(ihYkdO$/L4*}x ٕHQЧK88%EY=dbO56E=`ڸ"UEM0U|Q'g X%({)aI$~ShҜqК@ѻm8FӸG'r j^OGK{>BmN4UVdH!u}޴i(p-(!Dwԥ-8}Y\C$72r!ݝy?sF!h}k' &s29j`vkrGzხ*Af-5i@UhJ`N+13V5e-ѓ>\?.GMQ_k(;pLri[Ӡ(yw!51վ`pً P\p<5JBO"j̊M/踂!c7{)Wfȗyό)9 5wRVLTZ]ֶ M&5JRT--'J؃pk!ĺzޚ,~Od )5GJJv!>a Oh~2tKj(Fp:QKEcF IqXh39V\f\.HWq:zB ̈́װgN"cB/ىt&ШgyIrDHO ź#$'>}kY8*P(`:o.i:J=)Bk J>nM^nm$Bq,UW `EU+=xdC6ӑ-0;]HnHc-VYԵD"_Sh -^Q.O*5Ŭp|s | z,HaMpdט#Q"% U"万w>D{wUE.ȸlr,.*ƒ]M<[2*:*wU$B(T7WAMJ̉olI W w@1asBKSqc/#a2ڱhiz9KgP#63tFȘIPS q17.9Wm-NL0}_Gc:Oo|Ɯs'z']MQI u{kXO!Ե A csN;Fmdv RtD; OB0?[kF}jj#kQQ"a B3zgo/6;kmXBqhi@^r]E1XGƜZdyU5ˤyh6&Z0u]-F=*hlm&u?D' -#ܟb%;ڞѯo NXe*n*>&Vddy-@V刼!RsuS'?ɚr+ a @${r lY'JudF}>[^ =D.BiQ+2޳va~8Z# @qAk5='ȕk0j#QHdř8Ta"^ *& M$!(rM$~Y%mR cC#TI3ƺE`u lԔiQY& "xkFaTȸc{%XrqL> vhFX`^Twa  xձ 7atZFǙfƥCgDnh@qOӮUMR(^*n$ dśPk;Hz=@~9BnSQ9ǚOM !2w";V݁h'x~.=] 8³ͪa9 $vӇZ\ zOە$.>i67VuwpS!a]x3vDRt 8YSՑrtdݾ]W/BZ[R{.Es!-_ǰF&=l _ovq Mc]۵4ʼnj\ЧtUЬ'=[eX<3ىƸƮh-45͐C? &tEoB~):wS$vLc*A^/VGI}+UU_PU%Nf1 Ƃ;`yJ3Ʋ#ٔD:92S)5+ܓ#2ݮZ#j}#qp*rzQ': jC̍=%`Hs PyF)NskDiEQh3B?uItp > 8h;j\4CUA7(d,xg'Q+J:[2uQN[Lk7v`Bl37[ZRgTUPE2Q" _,ف=Nʣw?MPLc(&P_E_g|bqwf|H&EyGYx%oXJAǕ7FAyQ"Xu3__dN]RS\ |IQeѻje#_|7?P%5gw/+0>+I50aȤ.iC=_(qN,<}+Ʊ g yl9_8Zq9I Ab m.HQ." >H=]hy;#0:Q< ~-4:W"Fٰ?w?0w /hש.6@v7$#{c4 ݻтE_{C e+%)?BV&`d*VDIy81puڻO0y){6IT6*&pJ('UKy{Tejޭ":e\PiHxlx׺>⪎f F) !ɴdL=K:Yi/%i }l?`y/=@1t5ϓ=H޸5F$j0p cRzk7[Kzp0Rc~;v!&|WNͱ|B2(8Jޱ oskj=fMw_łb̔2Sg^C FD))5\YړEE+Or;[+z;7V;4[8BtvEQkUO to7 _V.4wRߜՐf@AvL{q Awj{JoBHu{z nDjg|λZKkSH8 ,jVKu)PM)*.žQspM18>jD) !7ׄ60:oPI!Qkinj0-Tc&:m/\unr~0o (-E]frI@PP< @ɶ .?vI6(i/(bd&к2#9mT"D*̛;GcW_@d&Qwv'\ܗXXE?_*Ƚ'5tcF^OEœ 0?+;A 1 ѧf ==:[a.OiUs@i LHKEg4kZOt[ hOq+gN_K24A⠷_lp 5`%c% ;ŲdJIυ~sGP42w Ы5PH_DYƱ寳W&O V=W.%bWj`o@ S[Y(PQ>7&ڵ= / !st!]KoFk i=A4-2UGLQn GMFaOuC~ KXZ#z0>hJ/qĦ\Nщ_Hߐ9G!#v*8p8*w;!:L,KSP5EUjXtP$vE7x sFςlV.]8ű#"ӣD1x{&J"kXOїbo#uׯDhÿo;͇صab^ ̓9 UjeUлCf8&Y٠b;@m±tO3d_^YUrH0h ,Iof鬷J,UU4D[(\3.^8ZVܑ,=vi4T Ӫԫxr].$'[eSOL}8yilFtgvWtai& |{˿(Jca~w0&be@Z0/(ߤ-UO8irIM Ð3 e^X51+ḌPu-;Jw{ @-ozߌ2 > 2&\(g= Ģ*%Gc>yU@r'֑|ۛ ::ղIz1v, hqY~Bm|+;8DbZ\[>ST<|ф²|zR>nLxw.Ɲ\WHȍԗ 0N:>[.J2H<8R?f;DYnml3ʱu8a}[uz4 8rE vD 9ŋK.ˈ1AkYu/|jzbV OcT}jZ֯ u*?̢ԆmNXy\%SJrZC5Py驥/&Ig 5zXo'Ch Hښ(ƚGPʂ.Fa\HB`mi?C:?%bl%!uፕ\\5KS0rYD>fg+I0Ur^w2$Q[h$J0l j_#Ώ.O(rU~Hp |zv·m&uX?#?62̬r(dgmo.ҧ6BE&'vˎ}R?5a~SLChPVJp]=Ep;*;a _|6V7R \hl] I)?˻l*,Ub^ f%ʵD{$M4mR^TלN¤97!Kߺ ?4S&'FXź&ٺmCʉmm`H4чhU5Tp'Ju&Twpm/+$MzI|SrӘj+ʔ8[c [.bA ňX = !2P>Fc8:XпQGM #FJYʆJxl}1.~R,^S0[U18SCt] @AZpJBQ9iP:&%v*'vW>=sfC+i׷|nL'(= 1}>e ۚg5j٨)Rͻ]!2mzy'r (d*80éɺdBO>9XNqH%B `m!3h~X;7[8w򉎽"<L< =2G G9P[ aF~Cuun/L{-m@h* )cB13T]yYlpv aiſ̼? .*,UZYи|(.@(YM ^h2'L{Ys9CNN^hCTO0cd;JM>gAZs%sK!yޖr؜vk9Ur@fk {2 TC&MzޝZYJ ku=֤¤8mBjP-MǠ?"ZbYb'"s-I:6zONOG޹A6=/vyx0(䅶R,2h?H02*ER-[tZqbԛUXaXA _`c -3U 3dȼ- -I2iƮxl2F72s ?ͷ%m$_Zݙս_*rC)*=ޤR[Dȴ“]*x 4VE#a1<\~bD2 s "Z)a4m4ARxG^>a;|HVv'\ c ̬q!obǗݐ*4Xa ؖ/saF9z2%p>IBR;n֡s2C䃷ٛudss\~g#lsuS+*0ewnXk\k5{Q+i3SUU//[Um6^ bL]ؖC*}5~㟬m6TSʕT^ZtC ~y|8*|ƋguؕT;񏞨 jB*4σ~Ֆ< T./nmTmwKS=Hƻʂ?F-#5b%sZ:JRSL5v pU;fBLhevLjCWm*5X IY`^ΔsLi{tӻ׆t.5|:yھ,>gۮek|$}4˲% ks1vun>R6YE`#x'a.F_';XBy tCƿ~ƵAwQRwJ$086eyZANjrBtnV)TaPD0l֖ ~3e$t'3xZgЗ%Ev}H^qIiߟ(6j=^ )D H2B>—A0pޗ4/1ERTwO<̼Ӏ`L`l;.Y/7>F)+iDOsq~lciipQ XƼnXGNjǷ>'NVD6jpt)0xǥEGh DeN9Ņl"-vě P9h=,ͮ/sZd/$ˇʏ'ܵ-!YBV /ġb%nJڢp(hӭ >%fEŽrg-zSK?t7} ]aFwd@+(aa_Jl5$~Yϣ5YGH1@E郛|d^jB*umH{p.KPL;T&4- 9I9Ͽ vSG5sn~̉t:_ww:u  fJɬ脴1 s(F|0&v"Zʫ6pԗίͽ9u\@/Dzv" h3X(Zɂ2f[;3 ŧ~tv9tF㱾s)6EܧdβI0:IS&OS~ tKĠ Cd/gl3V a^?lZ Klt Bf'DQ ϱL.4I$YҢ~Y%5aOm5J|-$W"E?{[B|"в&Q TIƕ  1~)J4yt2}[m{A8 YNpgƈw8YZ2,/<];'rfdǓV?y°~U)^ucƽ"d_뺹b4K V!dgvq;*dcP;/Z]`YAPZ?1۾Cifgv9nWٌ&qx/$:.F녚F3RcNYؤ&e奲^,+n?JVOT[A(qPi!= 3f G/,QR}Gdi5 L'\E5|_g"^M{v_ %oCpc?>alR W8 P~*qP}4_^7ϒ% S(:q V>|yn>91_Q R5d =tj=d; t48r|mő @oƵ2;8^DQ9!N x JA$㫆&pow_NW.jH /!h_ ŏ&G0MifׅO4k5M+9V|ShJ;%fRQI,pÒ[1%bwXϥm0A[!fQ1+1Z$(\MF>mEySɮw[=`5dЖ6?V>\`1Vj`|w메%POyx%Hܳnn:k-Vͨ+Ipہ2.7sL"f)x#' Dޘ>ȇ,v McBWB kJ'ᱰi`XiX=oZҞ7u# Aa"exYSu/+A:6//JSt€+Pbkra rJ#Ta ylA=M=wiR(S'Б%@UL8ЖGh$rte YL۬ՍG,׭B;.\E{{PU}"xxL^wD+pب&)K;H[uhC&*ا h{8lՖ\P %y// /';*x&4j"<1HHFD #Ż# /^?OQ3;!oEx#7XDtǑQ6 WopӍ;wI#;WJC)1,.gY5 ]QwY&ܘHWAa<"V(`K]ʕ"blS0y]ov%f.qBy<&GMxժ zX;ϳSIXç\ 0]9$gLjo*'1J*./d92]%@F3Zi䙪Enn 9y_i|38C`YxԸ i_{?whY~Pюϯ2ctc!q('?l]hqXW{iIW ph`8Egۋk>$p$fx8o;a'}@jE okei>`_1*!kFDF^\J$ < p3Q,4eD&sυpi~Rl>zfP7 w5|)Ee! c_m%6v{5|$B VHURr*زCk d<8dX0~c/524ivZY qNn603]u޿.Z9?ʻW3C,SK9| P;s^XSnMG\NO<EuEMD_2Z/7W<5 ˰Ǯ*څD+J!\hf,_L;,>v_?Cps6g"ӻt^?Kace ^ H>eR֊x0-AJ*O?o2`A0{lWoЯfs熜@p:~ebS\y1*{L9H7l:KX$gG% &䞥INa*x#t?WЌA=, ^Gow5d8amiɎbKl<H3 7..[CP~V ,KoyQiz?#*뭗s_]̫t(' <-ǹJ K@)4w3| DVX%GCŻBV"}]KwLrrEw`ϸXfژ?=x*BwϦܰ{Kq)Ḋg9x)ͻ* :b okv-OM:dV^io @9dn3,1TQ\ LF7'vEu>[)S(E]vi̿H3'oE`y8 ]lf< o 7WS1<*t}U0eU-4EX=7g8{gg Qu]zV˚L%7tq(w/ⴧPYQ`0Q6AM) 9+4erK ٛ]lN)a _l>maȰ=},o=c<H 9(1&m%2Zy*Bhݍ_G:Y3kyۃyY'Z%b`NĖ/z A B=o/ߚ|H&@tzg-(kAqj2Zke}-:|B믮$D] xo=Ot*{970A(+9߹8^\vHd.x-}fDrhWeziQS[y,[&+Q_8ޣm8Ue(i``aa@+w--HZ)؇ZEP!" s~y[TǨY"hɫSr6uT>G%PRҔKI.ELalZۺ؈wDM."`U*+Ɩ]Qu]="863 (}+Pt o[SߛU%'_=ue\[38['[ AQwA^fFשG$xŻb3}Wҝmq6ȴ3?IGIfr5p6?n lU(䓳$9:{!'x ASJL.g*F3ߜdwe^R(")QӛI p .+\Z24#{ MPAOc0IŻyg"ҸESB|/KNCyh)ƙyG3 mKâL˛Q#@9iPYHUfOQH['̐MI;G!˵vovllx1:/F9 k.vKZGSwq BLO *w>Wnӗ6U֠h<' <3ߪc9F,g}|ll鬷>›hüQbKVmbv~5/n`wB \Jy?\,37W7^>t+ {K0:X"U(NyF7Cо7:"Z_l7?%„1}q۠ aAkhV^(y̔wJ㘝9셝t&USaܛ*|< :[fgLZm]͙.V!QI#VJ>{Mfq\|YU: r#k%A6EROImU:]@*4MG'GQJ9j COٲ,ڍG$OQ+4,>zzkvJ䃉a%lZ$> eF:j[Im^zu7q*&Kd0uJp"C_V0,ϲe)o}=)4`^B'cϋ 46^K[rf`M +ax& _yK3cێ5HfJH-x%-5{uv4:BM?C7:GxS hZE'3˘"c9Z秈C )еp [VK=D 8LKIS F$M^uβ!B~,ђp㌳ޕ-tLI}t0.f;^3ȿdH>n fP/y{/;Be% ޴o0 B-uk(rS]q΄:Ró_ڂ>lqtIlN,oSor,~v."Rc:~PF;8#ywdPG֮/tEQձ,&ļK:eR,x_yKcc3(J N,XutvߕdJys)o8vJ[Tu r32KZUPhYfrKK55, ;H/ ַ ڣҔf|h)e?$5 !5 *Hylno9εMv$@)q7wFcKj]H˘'fP#lÌ8PBIڍqYJ_c!Hch,; 6,(67hm[ގ-1|vq{`'%WIlZ9gsfh5Nj9DG}:ɲum& S7x&yRӀ 3vB4*ă)[MI,ax';Wj3\:|*1^u.Z>N @щWƴg#uz 2bo8>mHhWS G6G'iS#9] e2'Lko13*0&cqngK p27~G$=֙b  (px|tlUYb"i<ՇRj7A(<5-֥A^g,] *o7BaSw)?,Ĵ /ؙ(?0Fm4!U^Q3x?c I /*Ņ8xDXKqD_%#Ikr6*r!T^H`ܶK<'7=Ir#̠vgNyHvZBQ&e6rnQcܐ3>鲀N:Lm$ۘ" Bv6rIt_+SǠF&?(pX #Ķ.'RAS-1?{4\^0 opcS〈E*V>uܧߨ"ZlSf(7^,AߍMgtrf( iC{6 @3L?t1- ɇ^uس~dpBa]!2wF8L#FoQo giO3c)FFrF[)-ԙ0gXQ\9xvng ma|~%h C;irP.G:A86-6hspT>&?Kx q'Yf[{LPy-HJͲLwA-^@7Τ;^ܨy?+L/mh4'f!'F0gR$n@s|x2="_}0wfxM_|갋M1f km/HcLT- 7Oy>SWN¾'a"p#l|%uuwܗjӤoƬGT֭#QY؉@T=<R$7How j/Α1.ܚwǧT~-ܧu;֨73MNs6X&h18TNa)wA %WIivSo<̗*+e i5Ie,$ ^K0g=wQFa{θiop!,#?zH4-lǡ\ˉ|];SY+ cCRZL8s->E3|l^gLG#X[AB6XeT2;+%{!i4U}WΦ\juRn _@(7X$!kbvqxx04o(\ 5:DY㥁g䡩E*/Bоk@<2.z(J ''O'*]w(bӀTsGMP[*8r>KÛ(*J$(?G9O}gL7ؽ{/sTcrkQƉy1we6Z"@ 2tTc|e›[ J`zIYTD$Z)ܛj܊[k#7٘b>ʱPqlb=N?c;y$ RsOtMdRDZ7'u.C 0&B,蒄f)ɋk.qOIb&o^7yR溚v;5 xl,l6KHQȷ(ndɢ{=_Բ{%Q,͖{3;U*ɺt>Vǔ5gf w `_# ɹ x)5 3WF2 ~t Р^Wrք&^ ѧzΉNAnԟ>p \:e=1{{ }wFxXu xF#!O`B>|%!ŋi7mQ 6`)JgzD؊*!|bߏjhILdSЀ>>@smΜ(Kx1sTu#bK'œ^Yًz]FHC~(7zZ1l(]KU{}$K^ a= ΠXh >o sI>ҷ}w4#_HƒsP-ޚX`*I6}7Tu-Irm,Y fqіFS@}]M4Qy^Ga&yn/x/-)7 o)01!6˜=v$WW-M$z?l:b>Š[E d.==%w]aW"-|Y , CۮUKNe!f nnqs)x*Bvs23m ~?=RZev~݂13,^9KyFL{ɞ )D3w(akP;Zk\:L62hv?nBcVuo7U|*m4tCW?lY%|Fk _Cf_V{oZjF]JnS?j}KEUeXg@򙜽148G GĆ^W/rj[57C(8o 4Ѳ;^Q5_RKdB /BǛk(_/.<6 tAjË9>v^pz5q_g<* ȡ6 8a+0 EދJhVb gOh)yv;M3M:Z0рʾ.@7q1ob$s9at{SpѪǟh^v31ng:D[@FrG_Vǯ%Ƽ9.'  <|JN?)ă}Lj[`.  '4@RRBtt$qXQڠtHboojZ6Ab8bJTOL RM_$q18ėR%n@q!4F}5?\WMZ{8hEl$A|}^&Eq,jar3;d/lS[eb,]F^ ] s#EODljͽ0Trb76IKI;K/&$p ANpzt6 6Mce\MQ{iʁEωI/cS juS\nM<֔ H%*R4!yʺ70G<λ^lϺod q͌J _'3r,ͽI|7!ӬcP`!q t?R-n{D(%δeFoZh4>tR::m&GҋТ@/ _`'thoĦwdCu֓DqЗ{L]<9;W,`za%]$! c)7  su1WQ#l*n-Cַtx#).$0wB F0,EZ,D8.?Wρg+|@o+ڮ@ƩͪD;^3N\aW~gu?LME᨝Vjh|`utZkgғHQtcF21YO?"wcde bs\G\ƽ.VTkwԉW-'I\*6+h7{f((MXZW._q\! U"!׎F Xa}1˸ ݺzX)ps$bW4 !Ǣ>^݌[3X|7AXqHvSwJJ]Q™Rky;a?ʏTv+tc&(#~?(qn . p+vQDyWR8S=}ڸX8K pޔ}UR'9Z۲#,:ƫ U͍ 6},uEv {'vy^#xe~ssd!JCqGN#}bg:;L3W$6(]Nc+BPqd!6=UhSjT$KYFa9ƜJ@ ߫[4~RRjy "XdCv(Ԁ VH/!dZ[F{ m5kAU>S:=zz 8syWr7?oMb;D y6n|hߜ8妮 W/\+sq*$ 3a?4CWȣqX<犫xZp]|=ZE??A꼏}"(EaC’4NwG7]E &V M 5|g*uGʖj?&J+ .h'?øBmS\nmZ#q]x?h_2hrڧ@9ÞWwx`R.-FʰVG(G\ am!@ i\-P8)Y 8yYNήjuow/FnUcbߥ8J@J"Fj*#XC位,v+gD 5^LOIKlPWt_X|W!5._VCT:kX_ 3v|Ǩd_ؼ"es5\LysZo`hPNHArr<"ly{-U hCvYU%g'˖A-Iꏅ5Acup:3*#+KĒ/9uuW v|]szsb]Z|C3y86$ ̳QmӋ}K ao+T*F"VUX 14ɳթ6? HY Tka^&7?qvǞ4ރZgKH*{oTaÍ˺Zmsmٖ0n4=Ds썷Nз "w܂)IOQĨy5 LxI yѫNd,[Oo-ђ,(Eh|Gb[եz z6*9֣cSׅrFakQ^W Zwy/|>LRŧX(,{jYxAڋ )InL<9;ْ$Pzl9$K|õ8f %=(pJ冀Ie]1=!ϰqgw^E.I+1__3CR2w,>@Iql~z_/V 4U_20d 619gTHoTY< zᲭJ4Z `Y\gO=i kZSwp`/% h@G ԙ8Ĵ3#>֋efXDf. @O( nEP<(2`4NsshPȠt"̡?oT8Y; 5+ա5 ,s]WP"Z[>>.tibl(:M4rd\|C_abjo#)qw ԰ZupF^SSy_r,~\K4"U37E}j՛څUk]#vՆٺnW&g?@{'QZMNLOI;m*6Ȯ A]{T艞8LQe:A)Pnp^`|Qv8ףLVq\ 4Ό>E"cHMCZ*;OkGzq7ˇ-%kѤT-y7PVdS3εc*2]p}tbN||QG5duUmzʗ$F|z`L',&JQhCټ$OWRa)N(Ȥ0,-) >:u s@ѷ0G60*)D"acH`@a&to4 DOCM?:T Ǟ#RG]=QClJ<6\ϊrзo76E6Ex.M2]ּg+>AAc$'XD xeHy7 @m]\{p0FBRv 2t_?IxȈ>ltxa]Z ڌ"\(iƩH"-/.bb3&_NRV(NL)OFz.;g ^Xd0BX%^JA^]sEޱbMf662 qǦ#3 m*cu9z&4;iYOaG(&_? uֻ}ϲAz< `y4ZPhT٤ס-Dq>5lUT\J}/^yN]ĎiXK7e+4LpS.J}u\WX(4ew)ԥw0;-)zkȈԸW%~(tR|S Q ڢE٫K]põ1b\t Y,Q㺲!M֪n$WiqQD:]!{+nU4h=߶HW&*!o+s&.uRvTYs}[ۺk>Nww<`#]YC8O4LU*՚n>7Ndg#j{ly*)6mTc#!Tm!+F 0N̗nR4_cp hpcܖj,ǨF':Cu p PVϭtQS%_INVQr҈w?U+-) .=ѕMkRi(d}0@}M~ʹie,V-~ ˸;ˤN*l>AFcM_r4BMR÷d cXč4d !\g[ZFjBId`ݦ4}O O%CRWgL1}AZҼhE`w'qJ+,.՜0m;)rg8Ot$v+ymVg&FIYMZ~&A$p+XF1?[g0|BD䱷I VpvW5nOqVж{b…(QO"mݱtL,@y7q;Is4F NdZ ytȶ? PT9Y&ʼCt9>3XJm}zyޔ<&587^6FLN eDܝ&?n\a@lѕb+Q( rȘ%RH 05 3wI\V$M}r#!^QY=+Pg8ܲ1j6Y,"ro(sM` fʹDfyz[Xj a3K'qnHz?<n|M[qD5í"UtBkDDI]oc<@Ha1tkQ pZ^86 (|Xq,ňh+UEҡayESTܱܝdTUx>MH"t αx9LV<K6zCnq'[a2``RUG!&[.`n9AcFmv c[MG>{pH `^l_fK</ZM8!0 QmM`+F5@v7Q5@V&_!xP4趔Ӫg\wF%SU7ԱTk#}򗽔Nc$vÈoȻqV-yAL1 ?вͯG#?mm!Rv؋crdcEFCߓRJ=3>#~sSÑz hc9 )eܙE)[6753~:O$#AX"B@er0=SMG#|V=ɭ+jC=wm%_,۱)=~נ7hҹ4TǣN2 T v4v녞;fc`qWn3..,Kmڋ)iorxv.+j \C:(sWEr#8Y=lyvx)8V1YJ\Pe6 A'fF jm@t>nU9M 06 ֮hB [}Cw@rM?_"jɎ-W" %HsQl](j9eHQi0~zwpt7f-\#T9xD{w 6ye/,/F6`ߟ?t"l1ŀ Q邪â߸рD~|;V+D]ҒK],#NKgJx]bΛkc+7,:ې8$pYS>w{24#R`C(Z2RSkEM"'MQOY$'T}D֫E@󡜝qֵ臨}4#B 4ZW*{v\g-rxl4>[>9 =8t ksXGVL,%fgPxsǿ x F*9k "G00r ~WvW` [:a\Fqp|LQ3EygVedžas@!jlME<ܪ82HFaAVǿM3#\t[0aXM҂^(,9ˆ}QrJb 3 wj64Jr(59M+&JMɽCkd;̃b;?(ƙDaraێh 2xW2q!% HZJsw7bv=a1hC@gc\ [)eu~@Ft{fO$5mޥc02+:Q#; &2!Md8D\A/XۅZr:~lڠ&uWa6fM4:HhܩH./0=6O7ŤDk2z rʜHՐC<_,_Wu Æ_s_=Ok s: ;f:`aRu sI+ /[!K QPO $mĝ.}:":@הDe␺qX@⮦j-]sÙBԲE &YΔ$5X&zqLk?Q=}sDBxCү=vT=[ Mqg"aYD5]da`T/jF8 g8q1F-Jf>סӑ X|MF$o:7S7p;B"?6ƭ]n3cDYr@5H:Vsk?YI;sQ-`ml\PوUac_Kj+ߧTY~Dd$ݹ)gK ~l*5((yGҩ HԵE?S["ӸŎ4~,%90ٛYqo RՏaU;G "3Jsp;3tӵldoi݉ҲAb_?IO(gPcοgGX6pJ{58~տ'禄[iXqƗSfPU}c1&ƨzQva+7dE4$*m\L_.yG8slȽIo&RhcfO2ԇޟMOMwԎZYi%0{T^I96|=尡[`Nbbk;=CXBagvA9 2d=<|n2|o[AeUe.-@0s+moֈ  h'N~Q5,otYƍ8/i誗ɷ sw,}xx|pE7NfT47~ JmTr8[$Q: uM 2<ωߖ5~07vnWE'qA%!%%h)2] K-MZfty(3<>#+4BWD_Yv1~8>I>8"P{[MO.(U@ 7}Gk)O b~o' }VJIѭmUHe(O"en+I!fք2nœsMj/@u4a&$V2ny"i$\s G{P[ j>nFB\LfhsUF):k؅NR[s q;C>69a]+NW7ֆI*-sjyat|gѾjs7!Ö)HIslWM/'Ft+_\Aw^tWcXC ]oY 1:e%+_@K]t0x`@|`ܫ?i*|VPUw# ԙ{l5 υʺ>y{zzշU(ޣ45UzyPtDp Y6M;MyJF%S\DZ4=W]?^i. 8-/O7ұV}-qm+ - C4E3jQgBXm":%\Oj6!<4^$}( \ tbq=},׽r""feF~K[-LU:R0jd51 ~\ Fr=@9_$%мD10GA޹iC! 9K{evd#9+cUUcPUnc,qG:E,"sHmCb#(_=wd%KuystnG @ ^5r-%X%R4q\٠$_|G=i?6𸶺_w2W(=5af1RU^x@Ҹ~[_C0Y 1Jz|-sG ցXr&=Ҟ2YnaK3~lO 4̊\FxEYY<t')gT0_K,֏{Pgϥ0R%]ѷ?cN,=K42/2/~6OhiK35DX)bHްZKn{ 2 s.Ak,i.%g>%_^^ 7z @il_~z1 N?~@}BjZab#f g5OvC@->LF_RJ'8v 'F߭H-+0:&\g۽Di}BeF%HPaȨ2Y ehc,Qոek $I@Ѯӷiu)$ٳ&Pb7 xt XMT㼁{ gU"wd*]0`%m).tet3.B!ǔ?`kL?!~{m~ QԞ f v¼Z#^aO>`H7J9ADspxLlB rA.daM[ٶ<F?\7i9.cXF>Fy,e'^fyoϘwѤ2+Gi,eAL.xSDnb)Pfͱ؍`'kJ)8q=s٧tjXzWA A]KI!}6&ߑZNVLu'!מ*4iR,3Sf\=\`QeTc!ЅQiw }oP0Cʜ{fou=VV6{SLxS֭W2}ӸF[a\'RP6s Hd߼H NQѱ]!V$c7r{)"OE0Q|z Kvz` Kؽ[k1)99ʓekCD.jP3b}d9IX? A ]P5gMWَ@J w9<䑨HAک~Yzx "m{ *:b> KfOq@Q膬k0fuNLG x˵DRQ^xrrN; &0zN5({eMuR+k{.,LkҥD/MAwiq6xw6|N]sK8c d̖!53%kЫzEH;Dy4KPbsr\,P=iWƭ)H~)p vKh\˵LiM|h}~]@%240^3FTZ*T_qj;t2bbe>88j` tJޤ")bs@bh HO/ `g#I/+$`o\s50HRΊ?%IajV7VDKwr"觗4W6lVN,QWy{b&YDZW2e#vYMS2u<:Qv*#"pc(ח`8lg⺃eX .I߾m Ƭ\-Od eN݀б>iIX{\Q&mKGGHH&r͑mhyraQ=Ͱ(J:[ME (UwtVNd`=IjG:(Y^yYz\OXCh֟>DL 4}5f*;$ELbrV A9s 712Ew#k _ԙހr=?]dI#YdgBa-\l:^F"6x97S,8pڦ7ʦ̓ v +?iJ[. rN$_@k] 6ewtdx^C#ysI_%f`7zRú#z"6Fx2\+Չލ_JesQ ~Sxsd~cAC5~=F fkF"Tt-0l]4[B 3U]\mlwP|rN95b]nDG,~!"2>@Ëj&;NY7Re%eYk5sa z+6fu0›Dhz#pPOL>41""ď1Sq ;$XdX$NUɥrT"q<#4uigԆ/YbV0Go!DL87aRr0LފtIb=)r\䟻Kuz6 ^$vS|\σ!\0P&&Ö3/#P2IU);5X{XCٻX07fW4*c{i3r.j}H8y&)t\Z 5xˆ4TΌ+-X۲q6BZLaʴש9DpMA}P_ Qր]H|FI `5ͥT4m/%o#mi^b.dһT18iRn50UA ?iY{$_3"X6[mt*ޅ738k!F?7sN#1@O Mh$"h!yve^\ur4=F 1/0XnETkwnhH4a#K1 @|$wt`Qbߺ58DWJ0g"tpd$\|($Ցen 䲔i]XB{)`bvK=_ tG^U0zTs-;"(+M'm)?a} ;Yg+4Sы'?~6( |O4CR?jF5=Ӻ=&,dɘwOݶ, q26/Ϣqy7d2l97ź8PRml5uEU2.z,?hm/wXrR6j$\rꇛ+Vl'Wb_Zg̺jsyz~r>gWPM&L;05 U &71]nj[Մ槈x+h1=XovDbZivsi}t:KG}?RݹI"SAp&lئ6i;Ւ>UĨG@͇,k5[_~pŷ^f`i lx YZ