fwupd-1.5.8-150300.3.5.1<>,&xbvp9|fyX x"g lXF;My>s|g]" 1xP '\Z1_F,\mehTyxx*ꢛ<"v]`v_ T*~>ǼHˤWlc?dt-]#-CBe~>bT6,Fw'\o6*NPz6f_eg4h r; Bȩ ^mw5ё>Fh?Xd  :04@D]~ > ^    :  :=p@CCF|6MdOe(e8eR9g,R:mKR=>?@FGH`IX6Yh6\]`^w(b=cdfekfnlpuvAwxtyz TCfwupd1.5.8150300.3.5.1Device firmware updater daemonfwupd is a daemon to allows session software to update device firmware on the local machine. You can either use a GUI software manager like GNOME Software to view and apply updates, the command line tool or the system D-Bus interface directly.bvs390zp35+SUSE Linux Enterprise 15SUSE LLC GPL-2.0-or-later AND LGPL-2.1-or-laterhttps://www.suse.com/System/Managementhttps://fwupd.org/linuxs390x if [ -x /usr/bin/systemctl ]; then test -n "$FIRST_ARG" || FIRST_ARG="$1" [ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || : for service in fwupd.service fwupd-offline-update.service fwupd-refresh.service ; do sysv_service=${service%.*} if [ ! -e /usr/lib/systemd/system/$service ] && [ ! -e /etc/init.d/$sysv_service ]; then mkdir -p /run/systemd/rpm/needs-preset touch /run/systemd/rpm/needs-preset/$service elif [ -e /etc/init.d/$sysv_service ] && [ ! -e /var/lib/systemd/migrated/$sysv_service ]; then /usr/sbin/systemd-sysv-convert --save $sysv_service || : mkdir -p /run/systemd/rpm/needs-sysv-convert touch /run/systemd/rpm/needs-sysv-convert/$service fi done fi [ -x /usr/bin/udevadm ] && /usr/bin/udevadm control --reload || : if [ -x /usr/bin/systemctl ]; then test -n "$FIRST_ARG" || FIRST_ARG="$1" [ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || : if [ "$YAST_IS_RUNNING" != "instsys" ]; then /usr/bin/systemctl daemon-reload || : fi for service in fwupd.service fwupd-offline-update.service fwupd-refresh.service ; do sysv_service=${service%.*} if [ -e /run/systemd/rpm/needs-preset/$service ]; then /usr/bin/systemctl preset $service || : rm "/run/systemd/rpm/needs-preset/$service" || : elif [ -e /run/systemd/rpm/needs-sysv-convert/$service ]; then /usr/sbin/systemd-sysv-convert --apply $sysv_service || : rm "/run/systemd/rpm/needs-sysv-convert/$service" || : touch /var/lib/systemd/migrated/$sysv_service || : fi done fi test -n "$FIRST_ARG" || FIRST_ARG="$1" if [ "$FIRST_ARG" -eq 0 -a -x /usr/bin/systemctl ]; then # Package removal, not upgrade /usr/bin/systemctl --no-reload disable fwupd.service fwupd-offline-update.service fwupd-refresh.service || : ( test "$YAST_IS_RUNNING" = instsys && exit 0 test -f /etc/sysconfig/services -a \ -z "$DISABLE_STOP_ON_REMOVAL" && . /etc/sysconfig/services test "$DISABLE_STOP_ON_REMOVAL" = yes -o \ "$DISABLE_STOP_ON_REMOVAL" = 1 && exit 0 /usr/bin/systemctl stop fwupd.service fwupd-offline-update.service fwupd-refresh.service ) || : fi test -n "$FIRST_ARG" || FIRST_ARG="$1" if [ $1 -eq 0 ]; then # Package removal for service in fwupd.service fwupd-offline-update.service fwupd-refresh.service ; do sysv_service="${service%.*}" rm "/var/lib/systemd/migrated/$sysv_service" || : done fi if [ -x /usr/bin/systemctl ]; then /usr/bin/systemctl daemon-reload || : fi if [ "$FIRST_ARG" -ge 1 ]; then # Package upgrade, not uninstall if [ -x /usr/bin/systemctl ]; then ( test "$YAST_IS_RUNNING" = instsys && exit 0 test -f /etc/sysconfig/services -a \ -z "$DISABLE_RESTART_ON_UPDATE" && . /etc/sysconfig/services test "$DISABLE_RESTART_ON_UPDATE" = yes -o \ "$DISABLE_RESTART_ON_UPDATE" = 1 && exit 0 /usr/bin/systemctl try-restart fwupd.service fwupd-offline-update.service fwupd-refresh.service ) || : fi fi]i(=yyy70x7h7hw`|(`W`W``hw`W`gx`G`W`gWhGhw`'`7`'h'hGh'h'`h7`7h7`ghG`w`w`7h`wpp7h7hhG`wh'`w`whhbo `  n\FT|Q 7&"C(LiDF%|In tIP ' (goA큤A큤AAA큤A큤큤AAA큤AA큤A큤AAA큤AA큤A큤A큤Ab2`[^b2`[^`[^bb`[^`[^b2b2b2`[^`[^`[^`[^`[^`[^bYbYbYbWbYbY`[^bbb`[^bbUbU`[^bXbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbYbZbZbZ`[^bb`[^b`[^b[`[^b2`[^`[^`[^b2bbb2`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^`[^b2b2b2`[^bb2b2`[^b[`[^bbbb2`[^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../fwupd-offline-update.serviceserviceserviceservicerootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootfwupd-1.5.8-150300.3.5.1.src.rpmconfig(fwupd)fwupdfwupd(s390-64)libfu_plugin_acpi_dmar.so()(64bit)libfu_plugin_acpi_facp.so()(64bit)libfu_plugin_altos.so()(64bit)libfu_plugin_ata.so()(64bit)libfu_plugin_bcm57xx.so()(64bit)libfu_plugin_ccgx.so()(64bit)libfu_plugin_colorhug.so()(64bit)libfu_plugin_cpu.so()(64bit)libfu_plugin_cros_ec.so()(64bit)libfu_plugin_dell_dock.so()(64bit)libfu_plugin_dfu.so()(64bit)libfu_plugin_dfu_csr.so()(64bit)libfu_plugin_ebitdo.so()(64bit)libfu_plugin_elantp.so()(64bit)libfu_plugin_emmc.so()(64bit)libfu_plugin_ep963x.so()(64bit)libfu_plugin_fastboot.so()(64bit)libfu_plugin_fresco_pd.so()(64bit)libfu_plugin_goodixmoc.so()(64bit)libfu_plugin_hailuck.so()(64bit)libfu_plugin_iommu.so()(64bit)libfu_plugin_jabra.so()(64bit)libfu_plugin_linux_lockdown.so()(64bit)libfu_plugin_linux_sleep.so()(64bit)libfu_plugin_linux_swap.so()(64bit)libfu_plugin_linux_tainted.so()(64bit)libfu_plugin_logind.so()(64bit)libfu_plugin_logitech_hidpp.so()(64bit)libfu_plugin_nitrokey.so()(64bit)libfu_plugin_optionrom.so()(64bit)libfu_plugin_pci_bcr.so()(64bit)libfu_plugin_pci_mei.so()(64bit)libfu_plugin_pixart_rf.so()(64bit)libfu_plugin_rts54hid.so()(64bit)libfu_plugin_rts54hub.so()(64bit)libfu_plugin_solokey.so()(64bit)libfu_plugin_steelseries.so()(64bit)libfu_plugin_superio.so()(64bit)libfu_plugin_synaptics_cxaudio.so()(64bit)libfu_plugin_synaptics_prometheus.so()(64bit)libfu_plugin_system76_launch.so()(64bit)libfu_plugin_thelio_io.so()(64bit)libfu_plugin_thunderbolt.so()(64bit)libfu_plugin_tpm.so()(64bit)libfu_plugin_tpm_eventlog.so()(64bit)libfu_plugin_upower.so()(64bit)libfu_plugin_vli.so()(64bit)libfu_plugin_wacom_raw.so()(64bit)libfu_plugin_wacom_usb.so()(64bit)metainfo()metainfo(org.freedesktop.fwupd.metainfo.xml) @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@    @@/bin/sh/bin/sh/bin/sh/bin/sh/bin/sh/usr/bin/python3config(fwupd)libc.so.6()(64bit)libc.so.6(GLIBC_2.2)(64bit)libc.so.6(GLIBC_2.3.4)(64bit)libc.so.6(GLIBC_2.4)(64bit)libc.so.6(GLIBC_2.7)(64bit)libcurl.so.4()(64bit)libelf.so.1()(64bit)libelf.so.1(ELFUTILS_1.0)(64bit)libelf.so.1(ELFUTILS_1.5)(64bit)libfwupd.so.2()(64bit)libfwupd.so.2(LIBFWUPD_0.1.1)(64bit)libfwupd.so.2(LIBFWUPD_0.7.0)(64bit)libfwupd.so.2(LIBFWUPD_0.7.1)(64bit)libfwupd.so.2(LIBFWUPD_0.7.3)(64bit)libfwupd.so.2(LIBFWUPD_0.8.0)(64bit)libfwupd.so.2(LIBFWUPD_0.9.2)(64bit)libfwupd.so.2(LIBFWUPD_0.9.3)(64bit)libfwupd.so.2(LIBFWUPD_0.9.4)(64bit)libfwupd.so.2(LIBFWUPD_0.9.5)(64bit)libfwupd.so.2(LIBFWUPD_0.9.6)(64bit)libfwupd.so.2(LIBFWUPD_0.9.7)(64bit)libfwupd.so.2(LIBFWUPD_0.9.8)(64bit)libfwupd.so.2(LIBFWUPD_1.0.0)(64bit)libfwupd.so.2(LIBFWUPD_1.0.4)(64bit)libfwupd.so.2(LIBFWUPD_1.0.7)(64bit)libfwupd.so.2(LIBFWUPD_1.0.8)(64bit)libfwupd.so.2(LIBFWUPD_1.1.1)(64bit)libfwupd.so.2(LIBFWUPD_1.1.2)(64bit)libfwupd.so.2(LIBFWUPD_1.1.3)(64bit)libfwupd.so.2(LIBFWUPD_1.2.1)(64bit)libfwupd.so.2(LIBFWUPD_1.2.2)(64bit)libfwupd.so.2(LIBFWUPD_1.2.4)(64bit)libfwupd.so.2(LIBFWUPD_1.2.5)(64bit)libfwupd.so.2(LIBFWUPD_1.2.6)(64bit)libfwupd.so.2(LIBFWUPD_1.2.7)(64bit)libfwupd.so.2(LIBFWUPD_1.2.8)(64bit)libfwupd.so.2(LIBFWUPD_1.2.9)(64bit)libfwupd.so.2(LIBFWUPD_1.3.1)(64bit)libfwupd.so.2(LIBFWUPD_1.3.2)(64bit)libfwupd.so.2(LIBFWUPD_1.3.3)(64bit)libfwupd.so.2(LIBFWUPD_1.3.4)(64bit)libfwupd.so.2(LIBFWUPD_1.3.6)(64bit)libfwupd.so.2(LIBFWUPD_1.3.7)(64bit)libfwupd.so.2(LIBFWUPD_1.4.0)(64bit)libfwupd.so.2(LIBFWUPD_1.4.1)(64bit)libfwupd.so.2(LIBFWUPD_1.4.5)(64bit)libfwupd.so.2(LIBFWUPD_1.4.6)(64bit)libfwupd.so.2(LIBFWUPD_1.5.0)(64bit)libfwupd.so.2(LIBFWUPD_1.5.3)(64bit)libfwupd.so.2(LIBFWUPD_1.5.5)(64bit)libfwupd.so.2(LIBFWUPD_1.5.6)(64bit)libfwupd.so.2(LIBFWUPD_1.5.8)(64bit)libfwupdplugin.so.1()(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.1.0)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.6.1)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.7.1)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.7.2)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.8.0)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.9.3)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.9.5)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.9.7)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_0.9.8)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.0)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.1)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.2)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.3)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.4)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.5)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.6)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.7)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.8)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.0.9)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.1.0)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.1.1)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.1.2)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.2.0)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.2.2)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.2.4)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.2.5)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.2.6)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.2.9)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.3.1)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.3.2)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.3.3)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.3.4)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.3.5)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.3.6)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.3.8)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.3.9)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.4.0)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.4.1)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.4.5)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.4.6)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.5.0)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.5.1)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.5.2)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.5.4)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.5.5)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.5.6)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.5.7)(64bit)libfwupdplugin.so.1(LIBFWUPDPLUGIN_1.5.8)(64bit)libgio-2.0.so.0()(64bit)libglib-2.0.so.0()(64bit)libgobject-2.0.so.0()(64bit)libgudev-1.0.so.0()(64bit)libgusb.so.2()(64bit)libgusb.so.2(LIBGUSB_0.1.0)(64bit)libgusb.so.2(LIBGUSB_0.1.1)(64bit)libgusb.so.2(LIBGUSB_0.2.2)(64bit)libgusb.so.2(LIBGUSB_0.2.8)(64bit)libgusb.so.2(LIBGUSB_0.3.1)(64bit)libgusb.so.2(LIBGUSB_0.3.3)(64bit)libgusb.so.2(LIBGUSB_0.3.5)(64bit)libjcat.so.1()(64bit)libjcat.so.1(LIBJCAT_0.1.0)(64bit)libjcat.so.1(LIBJCAT_0.1.3)(64bit)libjson-glib-1.0.so.0()(64bit)libpolkit-gobject-1.so.0()(64bit)libpthread.so.0()(64bit)libpthread.so.0(GLIBC_2.2)(64bit)libsqlite3.so.0()(64bit)libsystemd.so.0()(64bit)libsystemd.so.0(LIBSYSTEMD_209)(64bit)libtss2-esys.so.0()(64bit)libxmlb.so.2()(64bit)libxmlb.so.2(LIBXMLB_0.1.0)(64bit)libxmlb.so.2(LIBXMLB_0.1.1)(64bit)libxmlb.so.2(LIBXMLB_0.1.11)(64bit)libxmlb.so.2(LIBXMLB_0.1.12)(64bit)libxmlb.so.2(LIBXMLB_0.1.13)(64bit)libxmlb.so.2(LIBXMLB_0.1.2)(64bit)libxmlb.so.2(LIBXMLB_0.1.3)(64bit)libxmlb.so.2(LIBXMLB_0.1.4)(64bit)libxmlb.so.2(LIBXMLB_0.1.6)(64bit)libxmlb.so.2(LIBXMLB_0.2.0)(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)typelib(Fwupd)typelib(GLib)1.5.8-150300.3.5.13.0.4-14.6.0-14.0-15.2-12.04.14.3aZ@`e`c`KW`6?`.V_S_м@_$_i_F@__@_O@_"@_"@_"@_@^א^א^1^@^h^)^ @]@]@]c]8H@] \\-@\@\Yz\73\\U@\ @[k@[Q@[\[h@[Xf@[GB[E@Zľ@ZlZ@Z`@Z1@Z1@Z1@Z;@Z8@Z2gYYYX @XX*X*X*X*X*X*X*X*X*Vii@Vii@Vii@Vii@Vii@Vii@Vii@Vii@Vii@Vii@UeU+U+jlee@suse.comglin@suse.comglin@suse.comglin@suse.comglin@suse.cominfo@paolostivanin.comglin@suse.comglin@suse.comglin@suse.comglin@suse.comglin@suse.comdimstar@opensuse.orgdimstar@opensuse.orgqkzhu@suse.comdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgyfjiang@suse.comdimstar@opensuse.orgdimstar@opensuse.orgglin@suse.comglin@suse.comhpj@urpla.netstefan.bruens@rwth-aachen.debjorn.lie@gmail.comschwab@suse.debjorn.lie@gmail.comglin@suse.comglin@suse.commpluskal@suse.commaurizio.galli@gmail.comdimstar@opensuse.orgglin@suse.commail@bernhard-voelker.debjorn.lie@gmail.comglin@suse.comschwab@suse.deglin@suse.comndas@suse.denico.kruber@gmail.comjengelh@inai.denico.kruber@gmail.comtchvatal@suse.comoliver@getspam.deoliver@getspam.dedimstar@opensuse.orgmpluskal@suse.comantoine.belvire@opensuse.orgfcrozat@suse.comdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgstefan.bruens@rwth-aachen.defcrozat@suse.comstefan.bruens@rwth-aachen.dedimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgmpluskal@suse.comzaitor@opensuse.orgzaitor@opensuse.orgzaitor@opensuse.orgzaitor@opensuse.orgzaitor@opensuse.orgzaitor@opensuse.orgzaitor@opensuse.orgzaitor@opensuse.orgzaitor@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.org- Add fwupd-bsc1193921-nvme-ignore-non-PCI-NVMe-devices.patch to ignore non-PCI NVMe devices (e.g. NVMe-over-Fabrics) when probing. (bsc#1193921)- Remove valgrind from BuildRequires since it's not a hard requirement anymore. (bsc#1184248)- Update to version 1.5.8: New features: * Add a new internal flag to opt-in to GUID matching * Add D501 Baklava device support * Add fu_device_set_battery_level() * Add missing uint64 read and write helpers * Add Qubes wrapper source and create packages * Allow enabling plugins only matching a specific HwId * Prompt for unlock keypress if reset command is blocked * Remove obsolete dell-dock non-passive update flow support * Remove the Hughski public key * Show a warning when parsing invalid quirk files * Support for GATT characteristic signals/notifications * Support more than one protocol for a given device Fixes: * Align the CCGX DMC firmware to 64 byte chunks * Be more strict for custom quirk keys * Check pixart firmware compatibility with hardware before flashing * Correct a thunderbolt assertion if kernel failed FW read * Correctly erase STM32 devices when transfer size is less than sector size * Detect SREC overflow to avoid adding ~4GB of 0xFF padding * Do not show a critical error when flashing footer-less binary files * Don't allow device updates while needing activation * Fix a regression in the elantp defined IAP start address * Fix a regression where activate stopped working * Fix firmware update of pointing device on Lenovo ThinkPad Nano * Fix the HSI plugin 'Disabled' state * Fix the quirk key name for the Lenovo HDMI with power * Fix writing to the GD32VF103 bootloader * Only call elantp->detach() when writing a firmware blob * Updated StarLabs GUIDs * Wait a few ms for the Logitech hardware to settle after detach - Remove GPG-KEY-Hughski-Limited from the filelist - Drop upstreamed patch + fwupd-bsc1182057-fix-sbat-section-copy.patch- Add fwupd-bsc1182057-fix-sbat-section-copy.patch to set the proper section flags for .sbat section so that objcopy can copy it into fwupd*.efi (bsc#1182057)- Update to version 1.5.7: New features: * Add initial support for Bluez bluetooth devices * Add more supported pixart devices * Add support for the RTD21xx HDMI converter Fixes * Convert MBR types to GPT GUIDs to help find the ESP * Do not allow updating a synaptics-mst device with no customer ID * Drop unused heap pages after startup has completed * Ensure SBAT metadata is added correctly * Move the plugin build logic to the plugins themselves * Only allow verify-update for plugins that support CAN_VERIFY - Specify SBAT metadata for openSUSE/SLE (bsc#1182057) - Adjust the meson options + plugin_uefi => plugin_uefi_capsule and plugin_uefi_pk + plugin_synaptics => plugin_synaptics_mst and plugin_synaptics_rmi + Disable Intel AMT plugin in non-x86 systems- Update to 1.5.6: New features: * Add SBAT metadata to the fwupd EFI binary * Add support for GD32VF103 as found in the Longan Nano * Add support for RMI PS2 devices * Add support for the System76 Keyboard * Allow downloading firmware from IPFS * Install the UX data into a single .tar.xz file * Add a plugin to update PixArt RF devices * Add new hardware to use the elantp and rts54hid plugins * Allow specifying more than one VendorID for a device * Detect the AMD TSME encryption state for HSI-4 * Detect the AMI PK test key is not installed for HSI-1 * Add Maple Ridge Thunderbolt firmware parsing support * Add --no-remote-check to ignore checking for download remotes * Allow creating FMAP and Synaptics firmware using builder.xml Fixes: * Add support for the Starlabs LabTop L4 * Allow using an external ESP again * Ask the user to reboot when required if downgrading * Be more paranoid when parsing ASCII buffers and devices * Check if the fwupd BootXXXX entry exists on failure * Clear the pending flag if restarting the system * Do not allow flashing using flashrom if BLE is enabled * Do not allow Lenovo hardware to install multiple capsules * Do not parse the OptionROM image * Do not show Unknown [***] for every client connection * Fix dnload wBlockNum wraparound for ST devices * Fix OOM when using large ArchiveSizeMax values * Fix several crashes spotted by AddressSanitizer * Fix several places where the Goodix MOC plugin could crash * Include the PCR0 to the report metadata * Report the lockdown status from UEFI and SuperIO plugins * Show a console warning if the system clock is not set * Fix flashing a fingerprint reader that is in use * Fix several critical warnings when parsing invalid firmware * Fix updating DFU devices that use DNLOAD_BUSY * Ignore the legacy UEFI OVMF dummy GUID * Make libfwupd more thread safe to fix a crash in gnome-software * Never show unprintable chars from invalid firmware in the logs * Allow using fwupdtool as non-root for firmware commands * Do not trust the Block.HintSystem boolean for ESP filtering * Fix a memory leak when parsing Synaptics firmware * Fix a possible crash when reading the Goodix MOC USB request * Fix crashes when parsing invalid FMAP, DMC, Solokey and Synaptics images - Deprecate fwupd-bsc1179790-disable-hintsystem.patch- Add fwupd-bsc1179790-disable-hintsystem.patch to remove Block.HintSystem from ESP filtering (bsc#1179790)- Update to version 1.5.3: + Lower the CURL version required to fix build in RHEL + Do not use meson ternary operations to avoid bumping the required meson version + Added Lite Mk III + Allow setting the GMainContext when used for sync methods + Fall back to the misc device for serio devices + Actually implement rescan in FuUdevDevice + bcm57xx: Refactor CRC code to remove extra byteswap + bcm57xx: Fix CRC check + synaptics-rmi: Don't crash if calling ->to_string() before - >setup() + Fix a possible critical warning due to missing retval + Add the serio->firmare_id for UDev devices + Export the driver name from FuUdevDevice + Allow the client to send PKCS7 and GPG signatures + Force the remote kind to JCat server-side + Only parse the signature if the remote is JCat + fu-main: Fix sender_features insert with wrong size + make platform integrity plugin optional and disabled by default + Add quirk for Western Digital + Mark more user-visible strings as translatable + modem-manager: validate firmware update method combinations + modem-manager: remove unused byte counts in QMI/PDC update logic + modem-manager: make sure the correct interface number is used for QMI + modem-manager: udev monitoring only if device switches layout + modem-manager: plug udev client leak + Restrict loading component types of firmware - Enable supported_build to clarify that this package is supported (bsc#1179790) - Drop fwupd-platform-integrity.conf since upstream disables the platform integrity module by default now due to incompleteness. - Address fwupd-refresh.service in %preun, %pre, %post, and %postun and provide a rc link for it - Version "Obsoletes: dbxtool" and "Obsoletes: fwupdate"- Update to version 1.5.2: + ata: Add OUI quirk for Toshiba + libfwupd: Restore recognizing gpg and pkcs7 types still + Register the SoupSession gtype when required + Switch from libsoup to libcurl + Fix sync method when called from threads without a context + Move ABI check to Github actions + Enable github workflows + libfwupd: Add fwupd_client_download_file() + libfwupd: Add fwupd_client_get_user_agent() + Only download the remote metadata as required + Add breaks for fwupdate 12-7 (Closes: #960688) + Install modules-load configs in the correct directory + vli: Do not be clever replugging the MSP430 device + vli: Make some trivial debugging more specific to help debug an issue + make gcab optional + Fall back to FAT32 internal partitions for detecting ESP + Add a flag to indicate if packages are supported + uefi: a new option for uefi configuration to use UEFI removable path + Add a section to man page on scripting + synaptics-mst: Improve reliability by waiting 2 seconds after writing data + hailuck: Add an plugin for the Pinebook Pro laptop + Allow setting global flags for FuHidDevice + Set the SMBIOS chassis type to portable if a DT battery exists + colorhug: Don't set the version format to triplet at startup + Allow components to set the icon from the metadata + colorhug: Fix detection of version on older firmware versions + bcm57xx: Fix reading vendor/device ids from firmware. + Remove HSI update and attestation suffixes + trivial: make dbxtool executable to fix snap build + Ignore an invalid vendor-id when adding releases for display + Notify the service manager when idle-quitting - Refresh fwupd-bsc1130056-change-shim-path.patch - Changes in BuildRequires: + Replace pkgconfig(libsoup-2.4) with pkgconfig(libcurl) + Replace pkgconfig(systemd) with pkgconfig(libsystemd) - fwupd-msr.conf and fwupd-platform-integrity.conf are moved to %{_modulesloaddir}.- Obsoletes and Provides dbxtool since fwupd 1.5.0+ now embeds dbxtool in the dbxtool plugin- Amend the spec file (jsc#SLE-16818) + Only enable fish support for Tumbleweed + Only enable the MSR plugin for x86 + Only install dbxtool in the architectures with UEFI support- Update to version 1.5.1: + Use UDisks to find out if swap devices are encrypted. + Show a link to discover more information about a specific plugin failure. + updated fish completions to 1.5.0. + Remove the duplicate parent-child data in FwupdDevice and FuDevice. + Show a less scary fwupdate output for devices without info. + thunderbolt: recognize authorized value of '2' as well. + bcm57xx: Make hotplug more reliable. + Use a different Device ID for the OptionROM devices. + contrib/ci: switch TPM simulator from ibmswtpm to swtpm. + Delete unused EFI variables when deploying firmware. + Fix probe warning for the Logitech Unifying device. + Include the amount of NVRAM size in use in the LVFS failure report. + Add external interface messages.- Update to version 1.5.0: + Add a compatible re-implementation of the rhboot dbxtool. + Add async versions of the library for GUI tools. + Add commands for interacting with the ESP to fwupdtool. + Add firmware-extract subcommand to fwupdtool. + Add FwupdPlugin so we can convey enumerated system errors to the end user. + Add plugin for Goodix fingerprint sensors. + Add plugin that can update the BCM5719 network adapter. + Add plugin to update Elan Touchpads using HID. + Add support for a delayed activation flow for Thunderbolt. + Add support for ChromeOS Quiche and Gingerbread. + Add support for Hyper hardware. + Add support for the Host Security ID. + Add support for ThunderBolt retimers. + Add switch-branch command to fwupdtool and fwupdmgr. + Allow blocking specific firmware releases by checksum. + Allow contructing a firmware with multiple images. + Allow firmware to require specific features from front-end clients. + Allow updating the dbx using the LVFS, validating it is safe to apply. + Include the HSI results and attributes in the uploaded report. + Support loading DMI data from DT systems. + Support LVFS::UpdateImage for GUI clients.- Add fwupd-jscSLE-11766-close-efidir-leap-gap.patch: Set SLE and openSUSE esp os dir at runtime (jsc#SLE-11766) - Drop _multibuild and build option -Defi_os_dir="%{efidir}": with the above patch fwupd can detect esp os dir dynamically - Update the efidir related %post and %postun scripts in spec file- Update to version 1.4.5: * Add XB_QUERY_FLAG_FORCE_NODE_CACHE * Add support for a delayed activation flow for Thunderbolt * Allow firmware to require specific features from front-end clients * Allow multi-byte FuUdevDevice preads and writes * Be more defensive when remotes are missing required keys * Disable the SQLite lookaside cache * ccgx: Add more hybrid dock support * ccgx: Modify readme to remove customer info * ccgx: add new protocol for dmc dock * ccgx: remove verify flag in plugin * modem-manager: read the vendor ID directly from sysfs attribute Fixes: #2209 * thelio-io: Add the DFU instance ID as a counterpart only * thunderbolt: Add a new subclassed thunderbolt firmware update type * thunderbolt: Allow quirks to skip the authentication step * thunderbolt: drop support for force power * tpm-eventlog: fix PCR0 calculation * uefi: check for free space after cleaning up ESP * vli: Add dual-image feature for VL103 backup firmware * vli: Add the project ID shared SPI PD controllers * vli: Allow chained usb hub devices where the parent needs GPIOB reset * vli: Do not modify the class vfuncs depending on device type * vli: Do not use GUID matching for the MSP device * vli: Rename FuVliUsbhubI2cDevice to FuVliUsbhubMsp430Device * vli: Set FuQuirks on the shared SPI object * vli: Set the i2c instance IDs in probe() * vli: Use the GPIOB reset for the MiniDock VL103 * vli: Wait for the root device to be replugged when updating the MSP430- Update to version 1.4.4: * Release fwupd 1.4.4 * Fix regression when checking for downgraded metadata- Update to version 1.4.3: * Release fwupd 1.4.3 * ata: A OUI quirk for Kingston * ccgx: Fix a potential division by zero * Check the device requirements when returning from GetDetails * fu-engine: Allow --plugin-whitelist to use dashes instead of underscores * Always enforce the metadata signature has a valid timestamp * ccgx: modify install duration for dmc device * ccgx: Add support for HP DMC dock devices * dell-dock: prevent updates to occur via synaptics-mst plugin * dell-dock: Capture the dock SKU in metadata * synaptics-prometheus: Force the minor version from 0x02 to 0x01 to make sure the devices can be updated back to 0x01. * Generate a body for github releases (Fixes: #2034)- Build the package separately for openSUSE and SLE using _multibuild (jsc#SLE-11744).- Update to version 1.4.2: * vli: Add no-guid-matching for all VLI devices * vli: Remove a copy-and-paste mistake * Add two OUI quirks * ata: Add WD OUI quirk 000cca * synaptics-rmi: Essentially blacklist Dell K12A * dfu: Avoid communicating when bitManifestationTolerant is off * ata: Add OUI quirk for Western Digital * dfu: Support MATEKF722SE quirk * Fix various build issues with -Wdiscarded-qualifiers * thunderbolt/dell-dock: Delay activation for Thunderbolt updates * Switch the default of EnumerateAllDevices to false * Add OUI quirk for SanDisk * vli: Add two standard USB instance IDs for shared-PD devices * vli: Use GPIOB to reset the VL817 found in two Lenovo products * tpm-eventlog: Correct the display of final calculated PCRs * wacom-raw: fixup switching to bootloader mode- Update to version 1.4.1: * thunderbolt: Don't show safe mode errors for USB4 host controllers * ep963x: Various changes to make the plugin actually work on real hardware * Make tss2-esys conditional * ep963x: Remove some dead code spotted by Coverity * ccgx: Only update the FW2 partition of the ThinkPad USB-C Dock Gen2 * ccgx: Expand the FWImageType for future hardware * Allow specifying the device on the command line by GUID * Fix the DeviceID set by GetDetails * wacom-usb: Fix a theoretical buffer over-read to make GCC happy * vli: Only show the i2c devices on the USB3 hub * Allow devices to be updatable, but only when upgrading a proxy device * Reset the progressbar time estimate if the percentage is invalid * ccgx: Always report 100% when finished writing * Add a device quirk that forces an explicit device-id match * ccgx: Set the device name and summary from quirk files * vli: Only do the APP5 FW bug fix on affected hardware * vli: Show all the buffer when debugging with FWUPD_VLI_USBHUB_VERBOSE * fu-engine: Refresh device name and format before setting supported flag * Allow a device to set the logical or physical ID during ->setup() * ccgx: Split out a trivial helper to set the instance IDs * ccgx: Set the device name to be more useful * ccgx: Set the logical ID as the FwMode * ccgx: Split out a trivial function to set the version * ccgx: Do not reboot the device write after installing * ccgx: Do no show the flash parameters when unknown * Allow devices to match the proxy device by GUID * Do not skip attach() if the device is marked _WILL_DISAPPEAR * dell-dock: Port to using fu_device_get_proxy() * Allow adding a device 'proxy' device that can do actions on it * vli: Do not show the USB 2 recovery devices for USB 3 hubs * vli: Add metadata to identify which is the same physical device * uefi: correctly format firmware version of Dynabook (né Toshiba) X30, X40 and probably others * synaptics-cxaudio: Use the ->attach() device vfunc * synaptics-cxaudio: Wait for the device to reboot after writing firmware * logitech_hidpp: decrease verbosity of messages that hid++ ID is missing * Prefer to update the child first if the order is unspecified * Do not modify the device priority for child devices- Exclude fwupdate from the architectures without UEFI support.- Update to version 1.4.0: * Release fwupd 1.4.0 * Allow removing device flags from quirk files * Use black to format python source in a consistent manner * Define SOURCE_VERSION when building a package * Only set the parent when adopting children * Do not conditionalize attach() and detach() on IS_BOOTLOADER * Do not crash the daemon if a plugin does something dumb * wacom-usb: Add more sanity checks in case the daemon goes crazy * wacom-usb: Use a per-device cleanup function * Add some more device regression tests * wacom-usb: Add a lot of missing metadata about the devices * wacom-usb: Hide a lot of debugging behind FWUPD_WACOM_VERBOSE * Only auto-add counterpart GUIDs when required * ccgx: remove update message * ccgx: add parent guid for hybrid dock * ccgx: Use a smaller timeout for i2c read and write operations * ccgx: Retry the register read and write with a i2c reset * ccgx: Fix buffer overflow when reading out i2c status * ccgx: Retry the HID disconnect up to 5 times * ccgx: Show a better error message on failure * ccgx: Allow forcing firmware of the wrong app_type with fwupdtool * Modularize the hardware tests * Ignore indirect devices that replug during the composite firmware update * Export the device state as part of the D-Bus interface * Fix devices that use CounterpartGuid when more than one device is installed * Use the GUID as a fallback rather than the connection ID * ccgx: Fix critical warning on i2c write failure * logitech-hidpp: Do not add peripheral devices for receiver in BL mode * Install the installed-tests only if tests are enabled * Load the signature to get the aliased CDN-safe version of the metadata * vli: Only reboot the USB hub once * synaptics-cxaudio: Only use the PATCH2 address when the patch level is 2 * add STM32F745 stm dfuse quirk * dfu: Add a way to set the timeout from a quirk * Export the release urgency * Export the release creation time * Check the firmware requirements before adding SUPPORTED * data/motd/fwupd-refresh: Only order after network.target * ccgx: Do not add the HID device that will disconnect * ccgx: Use Silicon ID and Application type to set flash parameters * Add a new daemon configuration option to control EnumerateAllDevices * logitech_hidpp: set the bootloader protocol * Install meson from pip for LGTM * bash: add completion for fwupdtool reinstall * fu-tool: add reinstall command * fu-engine: export fu_engine_get_releases_for_device in header * vli: Wait for the VL103 to timeout to fix detach * ccgx: Show the UpdateMessage in the correct device mode * ccgx: Add extra instance IDs to match specific firmware * Use a static version number * thunderbolt: Rather than hardcoding to PCI slot numbers, use domain in GUID * Revert "thunderbolt: Create a unique GUID including Thunderbolt controller path" * dell-dock: Port to fu_device_retry() * nitrokey: Convert to use FuHidDevice * nitrokey: Port to fu_device_retry() * vli: Port to fu_device_retry() * Add fu_device_retry() helper functionality * ccgx: Implement writing firmware to flash * ccgx: Add i2c status check when reading or writing registers * ccgx: Add 5ms delay between read registers to avoid an i2c error * libfwupdplugin: Use fu_device_locker_close() * synaptics-mst: Use fu_device_locker_close() * Add fu_device_locker_close() * ccgx: Do not store the silicon ID in the image address * ccgx: Add device quirks for the Lenovo Hybrid Dock * ccgx: Switch HID mode to HPI mode at startup * ccgx: Clear the event queue when in startup * ccgx: Wait for hardware to settle when coming out of reset * ccgx: Do not mark the device as updatable when in boot mode * ccgx: Verify the firmware app type when preparing firmware * ccgx: Set the update message when running in backup firmware * ccgx: Read the FwAppType from the hardware * ccgx: Set the HPI version number for the current firmware * ccgx: Get the silicon ID to map the flash parameters * ccgx: Read the HPI device mode at startup * ccgx: Set up the HPI I²C config at startup * ccgx: Create devices when in HID and I2C modes * Add a new ChromeOS CI target to build without GPG and PKCS7 * Use Jcat files in firmware archives and for metadata - Removed fu-keyring-gpg which caused CVE-2020-10759 (boo#1172643) * csr: Allow truncated HID reads * vli: Only consider the high nibble when building the sub-version * csr: Parse the firmware as a DFU file * Add support for EP963x hardware * Add FuHidDevice abstraction * vli: Correctly attach VL103 after a firmware update * ccgx: Parse the metadata block in the firmware image * ccgx: Add a firmare parser for cyacd files * logitech: Correctly set the protocol * Add the optional device-id to the update --help output * Fix a difficult-to-trigger daemon hang when replugging devices * vli: Remove a dock device from the whitelist that is never going to be updated * vli: Add some trivial debugging to help track down a bug * vli: Never add USB hub devices that are not upgradable * uefi: Don't use shim for non-secure boot configurations * Start fwupd-activate.service after snapd.service * dfu: Actually reload the DFU device after upgrade has completed * dfu: Add one more m-stack device requiring a quirk * Apply version format to releases and devices at same time * Ensure that the DeviceID is set for child devices * Fix a daemon crash when removing children * Allow waiting for the parent device when replugging * Add fu_device_get_root() shared API * vli: Fix an error when detaching MSP430 * vli: Fix a critical warning when getting the USB speed * vli: Fix the error enum values for the MSP430 * Do not add blank lines when tokenizing Intel hex files * vli: Fix the version calculation for MSP430 * vli: Ignore one more error when attaching * vli: Always expect the VL103 header at 0x1003 or 0x4000 * vli: Do not fall back to the recovery write for usbhubs * vli: Only show the 2nd header if the device ID is valid * vli: Fix VL103 reboot from ROM mode to FW mode * vli: Add some better comments for writing GPIOs * Add a helper script to add a DFU header * Add 'firmware-convert' subcommand to fwupdtool * fu-engine: Make two passes of requirements checking * fu-engine: Copy the VersionFormat from the CAB if specified in `get-details` * Add a new plugin for CPU microcode * Don't build/install fwupdagent man page if agent build is not requested * Introduce a new VersionFormat for `hex` * Drop UEFI quirks we now inherit from metadata * ci: build Debian using libflashrom * When TPM PCR0 measurements fail, query if secure boot is available and enabled * fix fwupd.shutdown.in according to the movement of fwupdtool to bindir * ata: Add OUI quirk for Western Digital and Intel * improved fish shell completion * vli: Set the MSP430 version format to pair * Always return AppStream markup for remote agreements * ata: Add trivial OUI quirk for Micron * added completion script for fish shell * Do not fail loading in /etc/machine-id is not available * Use xb_builder_source_add_simple_adapter * Create FuCabinet and untangle a lot of legacy code * nvme: Do not try to handle integer version numbers * Allow server metadata to set the version format on some devices * fu-tool: Correctly append the release to devices in `get-details` * For the `get-details` command make sure to always show devices * fu-engine: Copy the version and format from donor device in get-details * fu-engine: Use unknown for version format by default on get-details * Inihbit all power management actions using logind when updating * Decouple the version format from the version itself * Add raw versions for bootloader and lowest * Allow server metadata to set the device name on some devices * Remove support for GCab less than v1.0 * fu-device-list: Check protocol before de-duping devices * Do not allow devices that have no vendor ID to be UPDATABLE * ata: Include a vendor ID for ATA hardware * ata: Switch off the verbose logging by default * Always check for PLAIN when doing vercmp() operations * Discard the reason upgrades aren't available (Fixes: #1678) * Improve the description of `fwupdtpmevlog` for man page * Move `fwupdtpmevlog` into `bindir` * uefi: Move `fwupdate` into `bindir` * Move `fwupdtool` and `fwupdagent` into `bindir` * Use the system provided flashrom on Fedora * Add a plugin vfunc to run after subclassed FuDevice creation * ci: use standalone script to generate build dependencies * Move the daemons from /usr/lib/fwupd to /usr/libexec/fwupd * Use the recently released flashrom v1.2 * Generate an additional UEFI quirk file using the stable LVFS metadata * uefi: Apply capsule update even with single valid capsule * Fix a critical warning when installing some firmware * ebitdo: Fix the endpoint address logged in the error message * uefi: Find the correct lds and crt name when specifying -Defi_ldsdir * upower: Move battery threshold declaration into a configuration file * upower: Decrease minimum battery requirement to 10% - Refresh fwupd-bsc1130056-change-shim-path.patch - Add new dependency: jcat- Update to version 1.3.9: * Release fwupd 1.3.9 * Always check for PLAIN when doing vercmp() operations * improved fish shell completion * vli: Set the MSP430 version format to pair * added completion script for fish shell * Always return AppStream markup for remote agreements * Do not fail loading in /etc/machine-id is not available * fu-engine: Fixup broken-ness from 0c0fada18fc9cb2a0efec351db67f0867bf045cd * Use xb_builder_source_add_simple_adapter * fu-tool: Correctly append the release to devices in `get-details` * For the `get-details` command make sure to always show devices * fu-engine: Copy the version and format from donor device in get-details * fu-engine: Use unknown for version format by default on get-details * Inihbit all power management actions using logind when updating * fu-device-list: Check protocol before de-duping devices * ata: Switch off the verbose logging by default * Discard the reason upgrades aren't available (Fixes: #1678) * Improve the description of `fwupdtpmevlog` for man page * Move `fwupdtpmevlog` into `bindir` * uefi: Move `fwupdate` into `bindir` * Move `fwupdtool` and `fwupdagent` into `bindir` * ci: use standalone script to generate build dependencies * Move the daemons from /usr/lib/fwupd to /usr/libexec/fwupd * Use the recently released flashrom v1.2 * uefi: Apply capsule update even with single valid capsule * Fix a critical warning when installing some firmware * ebitdo: Fix the endpoint address logged in the error message * fu-util: fix a logic error in report uploading introduced in e076d48afb74d1447936d353f12781755f13b047 * uefi: Find the correct lds and crt name when specifying -Defi_ldsdir * upower: Move battery threshold declaration into a configuration file * upower: Decrease minimum battery requirement to 10% - Update to version 1.3.8: * Release fwupd 1.3.8 * Do not use fu_common_vercmp() when the device verfmt is PLAIN * altos: Output raw buffer data when using FWUPD_ALTOS_VERBOSE * altos: Prefix an error to provide more context * altos: Add a trivial _to_string() implementation * synaptics-cxaudio: Make the verfmt match that of the existing Windows tools * synaptics-mst: Allow MST to fall back if no PCI device is marked as parent * Allow specifying a list of subsystems when setting a physical ID * synaptics-mst: Fix trivial thinko caused by the wrong dock connected * vli: Invert the logic to reboot the parent FuCliUsbhubDevice, not the child * vli: Switch around the hub tier values * uefi: Fix a build regression with Fedora 30 * logitech_hidpp: Ignore detach failures (Fixes: #1183) * logitech_hidpp: When detaching to bootloader use non-blocking IO and wait for timeout * vli: Show erase progress when doing a v2 recovery * uefi: Do not remove the 'Linux Firmware Updater' boot entry before update * uefi: Do not rewrite BootOrder in the EFI helper * vli: Add support for the PS186 device * Set up more parent devices for various Lenovo USB hubs * cxaudio: Set the update protocol to prevent a daemon warning * vli: Add support for Lenovo Modularized dock * Add an extra instance ID to disambiguate USB hubs * vli: Remove the unused tierX custom flags for each device * Revert "Correctly delete UEFI variables" * uefi: make debugging output more readable * vli: Fix a potential buffer-overflow when parsing firmware * tpm: Optimize the string parsing and fix the boolean logic * synaptics-rmi: Add a missing error enum value * synaptics-rmi: Correctly identify a checksum failure * synaptics-rmi: Fix Coverity issue that is impossible to hit in reality * solokeys: Parse old versions of the bootloader string * Add a plugin to update PD controllers by Fresco Logic * vli: Set the device progress correctly when erasing a PD device * vli: Use the correct command to get the device firmware version * vli: Correctly reset all VL100 devices * vli: Set all standalone PD devices to not do SPI auto-detection * vli: Mark standalone PD devices as updatable * vli: Set the protocol for FuVliUsbhubPdDevice types * Support the new gnuefi file locations * Cleanup ancient fwupdate-* EFI variables too (Fixes: #1739) * Detect kernel lockdown status * vli: Add the DEV instance ID to all devices * tpm-eventlog: Replay the TPM event log to get the PCRx values * tpm-eventlog: Store the eventlog hashes in binary form - Update to version 1.3.7: * Release fwupd 1.3.7 * Correctly delete UEFI variables * ci: allow working with podman w/o aliases * ci: fedora: force correct rpm package version * src: fu-engine: check version was updated by checking version * Correctly import PKCS-7 remote metadata * Add 'refresh' to fwupdtool * Add 'get-remotes' to fwupdtool * Generate a win32 setup binary * Fix display of UTF-8 characters on Windows * Move MOTD population into the daemon * fu-util: Discourage metadata refreshes more than once per day * Disable the battery percentage checks if UPower is unavailable * Allow getting the list of updates in JSON format from fwupdagent * Revert "trivial: Attempt to fix Debian CI" * fu-remote-list: emit a changed signal when modifying a remote * synaptics-mst: Skip self tests for systems with amdgpu * Allow applying all releases to get to a target version * Split up fu_engine_install() into two halves * logitech_hidpp: use the correct timeout for IO channel writes * Allow quirking devices that always require a version check * Shut down automatically when there is system memory pressure * Show the device parent if there is an interesting child * Allow the client to get the list of FwupdDevice children * Set the FwupdDevice parents in fwupdtool * Don't always get the vendor ID for udev devices using the parent * Add a runtime warning when adding a device without an vendor-id or protocol set * vli: Set more of the firmware max sizes automatically * vli: Add a SpiAutoDetect quirk for some of the PD devices * vli: Use a different protocol ID for i2c devices * vli: Add support for standalone Single PD devices * vli: Move generic SPI functionality into the FuVliDevice base class * vli: Remove the PD emulation code * vli: Use a more standard GUID for the child i²c and shared SPI devices * vli: Allow setting the device kind from a quirk * vli: Make more function names match the docs * vli: Move the SPI command quirking from FuVliUsbhubDevice down to FuVliDevice * vli: Rename FuVliUsbhubPdFirmware to FuVliPdFirmware * vli: Allow the device to specify the PD firmware header offset * vli: Add a FuVliDevice as a subclass to FuVliUsbhubDevice * vli: Define the device GType in the quirk file * vli: Move the CRC calculations out of usbhub scope * vli: Have one 'DeviceKind' for all objects * vli: Rename the `vli_usbhub` plugin to `vli` * Capitalize GNOME - package has grown a few new binaries: fwupdagent, fwupdate, fwupdtool and a tpm event debugging tool, that is packaged separately: fwupdtpmevlog- Drop docbook-utils-minimal build dependency, manpages are generated with gtk-doc.- Update to version 1.3.6: * plugins/coreboot: Add missing fu_hash dependency * trivial: synaptics-cxaudio: Add Google type C <-> 3.5mm adapter * fu-engine: don't expose bootloader version errors to users * trivial: dell-dock: drop unused quirk keyx * trivial: rename synapticsmst to synaptics-mst * trivial: actually set vendor ID for synaptics * fu-remote-list: Drop fallback path behavior * libfwupdplugin: Make sure systemd created environment variables exist * trivial: fu-remotes-list: drop usage of `FU_SELF_TEST_REMOTES_DIR` * trivial: synaptics-rmi: hardcode Vendor string * trivial: Set vendor ID for Dell WD19 to USB:0x413C (Fixes: #1653) * trivial: Document the use of vendor-id in each plugin * superio: Use the baseboard vendor as the vendor ID * uefi: Use the BIOS vendor as the vendor ID * coreboot: Use the BIOS vendor as the vendor ID * flashrom: Use the BIOS vendor as the vendor ID * dell: Hardcode a plausible vendor ID * emmc: Set the correct vendor ID prefix * fu-util-common: correct the default prompt for reboot/shutdown (Fixes: #1617) * Split out the remote loading from FuConfig * vli-usbhub: Fix the quirk for the legacy VIA 813 chip * Clarify error messages when no upgrades available * trivial: Don't handle a vendor-id requirement error that cannot happen * Only check the vendor ID if the device has one set * fu-install-task: Enforce that device protocol matches metadata * Add a new plugin that can parse the TPM event log * Allow other plugins to contribute report metadata * trivial: dell: hardcode the physical device ID for tpm to match the tpm plugin * Add a new plugin that exposes the system TPM device firmware version * Add fu_udev_device_set_flags() * trivial: Render large values of VersionRaw in a more portable way * trivial: wacom-raw: mark all Moffett SKUs as self recovery * Throw exit status 0 (instead of 2) if there is no firmware to be updated * Add a `dell-bios` version format * Add support for multiple LVFS::VersionFormat tags * Do not do semver conversion in fu_common_vercmp() * trivial: Deprecate fu_common_version_parse() * trivial: Support 'plain' in fu_common_version_from_uintXX() * Add the sysfs 'description' as the one-line device summary * trivial: Also print the parent keys when using FU_UDEV_DEVICE_DEBUG * trivial: Add fu_common_version_from_uint64() * trivial: Convert the VersionRaw value to a uint64_t for future use * Allow building on Windows with MinGW * synaptics-prometheus: Allow incremental version major and minor number * Replace 'scheduing' with 'scheduling' * Export the raw device version to the client --verbose output * trivial: Only dlopen the test plugin once * Export the device protocol to the client --verbose output * trivial: installed-tests: try to display journal for failed tests * trivial: ci: debian: enable verbose daemon logging for failure analysis * trivial: installed-tests: explicitly choose webcam device ID * trivial: debian: remove obj-* built files to fix back to back builds * trivial: ci: don't let bad symlinks cause debian build failures * trivial: debian: correct a dependency for libfwupdplugin-dev - Changes from version 1.3.5: * plugins: Fix potential use of NULL pointer in fu_dell_dock_mst_write_register * Fix shifting integer by more than 31 in fu_util_filter_device * synaptics-prometheus: Reload the device version after IOTA update * synaptics-prometheus: Reload the device version after update * trivial: wacom: remove coretronic config from Moffett scope * trivial: Fix a NULL/FALSE confusion * trivial: Add a BR for Fedora * trivial: Fix coreboot commit to fix CI * trivial: libfwupdplugin: clarify name of self test * plugins/coreboot: Improve version detection * plugins/coreboot: Get rid of FU_HWIDS_KEY_BIOS_VENDOR in coldplug * trivial: Move progressbar out of libfwupdplugin * trivial: Unexport fu_test_get_filename() * trivial: Unexport fu_test_compare_lines() * trivial: Unexport fu_test_loop_run_with_timeout() * trivial: Do not include non-introspectable functions in the GIR * trivial: Fix up a few introspection problems in FwupdPlugin * trivial: Include the Fwupd GIR in the FwupdPLugin GIR * trivial: Never add duplicate symbols to the map file * trivial: Properly namespace the defines in the exported header * Install development files for libfwupdplugin * Convert libfwupdprivate to a shared library libfwupdplugin * trivial: Allow building GCab from a subpackage * trivial: Fix under-include to define O_RDONLY * trivial: Allow compiling without * trivial: Do not use FuProgressbar in dfu-tool * synaptics-prometheus: Manually set the bootloader mode when attaching * trivial: Split out a new helper funtion * trivial: Add some optional debugging when hotplugging devices * trivial: Include the correct header for S_IRWXU * Always use the more portable 3-arg form for open() * trivial: Untangle FuHistory from FuPlugin * trivial: Allow compiling without * Revert "synaptics-rmi: Use the build ID as the version number to match the vendor tool" * Add missing documentation from the plugin interface * trivial: fu-udev-device: remove a prototype that was missed in b3d4d2ff * trivial: add missing gtk-doc fields for many files in src/ * trivial: fix compile failure without gudev * synaptics-prometheus: Mirror the _IS_BOOTLOADER from device to config * Allow setting the device flags using GObject properties * vli_usbhub: Set the composite parent at construction time * synaptics-prometheus: Set the composite parent at construction time * Allow plugins to set the parent during construction * vli-usbhub: Whitelist the PD and I²C devices * Set the protocol per-device not per-plugin * synaptics-rmi: Use the build ID as the version number to match the vendor tool * Create a REV_00 instance ID as this may be what the vendor needs to target * fu-util-common: Invert default behavior for reboot and shutdown prompts * trivial: fu-plugin-vfuncs: Add GTK documentation for all vfuncs * Make gudev a compile-time option * trivial: Set the offline trigger using an environment variable * trivial: ci: pull lintian from unstable for now. * trivial: stop including fu-hash.h as part of fu-plugin-vfuncs.h * Fix shebangs on scripts * trivial: Use prefixes for DATADIR in config.h for portability * Allow compiling GUsb as a subproject * trivial: fu-udev-device: add a to_string func for debugging * trivial: Don't assume that plugins end in .so * trivial: optionrom: remove unneeded includes * trivial: debian: ci: ignore library-not-linked-against-libc for more * trivial: remove version-format.md * trivial: Allow compiling without pwrite() * trivial: Allow compiling without * trivial: Allow compiling without realpath() * trivial: Allow compiling without HAVE_LC_MESSAGES * trivial: Allow compiling without getuid() * trivial: Allow compiling without * trivial: Allow compiling without * trivial: Allow compiling without * Ensure the _get_type() gets the same ABI version as the constructor * Use the correct unlocker when using GRWLock * trivial: plugins: only build coreboot when option set * fwupdtool: don't show a warning when calling `get-plugins` - Changes from version 1.3.4: * trivial: Don't force specific linker flash when cross building * dell: Use the more portable g_usleep() * trivial: Fix unused header includes * vli-usbhub: Make erasing less verbose and writing more obvious * vli-usbhub: Correctly print the 24-bit USB3 offset * vli-usbhub: Print the PD firmware offset and size for debugging * vli-usbhub: Open the parent device before attempting to read or write from the child * vli-usbhub: Set the install duration for the PD device * trivial: Fix a failed error prefix string * trivial: wacom-raw: Remove embedded from device name * wacom-raw: Correct HWID support * uefi: Just use a uint16_t for BootNext processing * uefi: Use a simpler entries set algorithm * vli-usbhub: Add support for writing using I2C passthru * vli-usbhub: Support updating PD devices that share the hub flash * vli-usbhub: Support the PD file format * trivial: uefi: correct a NULL pointer dereference * uefi: fall back to `ID_LIKE` when the path for `ID` doesn't exist (Fixes:# 1566) * uefi: Make generate_binary.sh more robust * Tokenize the Intel Hex file before parsing * trivial: Detect the USB version automatically * trivial: fu-util/fu-tool: explicitly block unsupported flags * Add support for matching requirements on device parents * Skip cleanup after device is done updating if `will-disappear` is set (Fixes: #1529) * efi: use a wildcard section copy for final EFI generation * modem-manager: explicitly use plain version format * modem-manager: add quirks for the Foxconn T77W968 modules * Allows confined snaps to activate fwupd via D-Bus * trivial: thunderbolt: clarify error message * Add a new property `Interactive` to the daemon * trivial: contrib/get-version.py: require git less hard * superio: Never read from port offset zero * superio: Fix regression when coldplugging superio devices * trivial: Fix Fedora CI build * trivial: Fix the autobuilt spec file with the new tarball version * Dynamically determine release version * trivial: synapticmst: allow missing `/proc/modules` * synapticsmst: filter invalid chip IDs * trivial: Provide some defines for common image names * Allow aborting early when using fu_archive_iterate() * Add fu_firmware_image_set_version() for future use * modem-manager: increase re-enumeration delay to 20000ms * modem-manager: add counterpart GUID for the DW5821e/eSIM * Add versions formats for the Microsoft Surface devices * usb: make loading vendor/product/serial strings non-fatal * trivial: Fix the protocol ID for VLI usbhub devices * trivial: wacom-raw: add more device IDs for Dell devices * trivial: contrib: don't require TSS for debian archs without EFI * fu-udev-device: Adjust bounds checking to be safer * fu-udev-device: Don't assume all devices have `device_file` * synaptics-rmi: correct an error cleaning up on probe * trivial: fu-udev-device: add some safety checks for fd * udev-device: fix offset of vendor id of hidraw devices * flashrom: switch to upstream source * trivial: fu-plugin: only show an error once "failed to open plugin" was being prefixed twice * trivial: debian: only use mingw-w64-tools in archs with UEFI plugin * fastboot: Fix a regression when updating modem firmware * trivial: conflict with old unifying plugin * Rename unifying plugin to logitech-hidpp (Fixes: #1329) * Add a new contrib script for installing a Dell BIOS from an EXE file * trivial: add-capsule-header: rename to make it easier to import * trivial: simple_client: make it easier to reuse code * trivial: firmware-packager: make it easier to reuse code * trivial: add-capsule-header: make it actually work * trivial: fix some gtkdoc sections * Bump the required gudev version * trivial: Fix a compile error with older versions of gudev * trivial: wacom: add vid/pid for panels in Moffett * trivial: post release version bump - Changes from version 1.3.3 * unifying: notify users to replug when using dfu control (Fixes: #1383) * trivial: 8bitdo: set a transient failure while waiting for user action * libfwupd: Add a new error type for user action needed * trivial: 8bitdo: show the same message for SN30pro and SN30pro+ * trivial: Fix up some typos from codespell * trivial: Ensure config.h is included in all source files * trivial: Fix up some NULL/FALSE confusion * trivial: Add all the _LAST enums that shouldn't be checked for ABI * trivial: Fix a typo that means that UEFI results were never cleared * Always report the update-error correctly for multiple updates * trivial: Fix fwupdmgr get-history if the firmware was not installed from the LVFS * trivial: Do not emit a warning if a child has no version number * Move the file descriptor lifecycle into FuUdevDevice * trivial: Fix some GtkDoc annotations * ebitdo: Modernize the plugin to use FuFirmware * nitrokey: Use fu_common_dump_raw() when debugging * thunderbolt: Create a unique GUID including Thunderbolt controller path * Use device safety flags to show prompts before installing updates * trivial: Use the new possible_plugin support for USB devices too * jabra: Move the Jabra-specific detach out into its own plugin * Ensure the device is open when doing the subclassed prepare() and cleanup() * vli-usbhub: Add support for updating V2 devices * Allow verifying the device image itself from fwupdtool * Use XMLb to query quirks * trivial: ci: disable pulling libxmlb from unstable * synaptics-prometheus: Don't add a config-subdevice in bootloader mode * dfu: Use the VID/PID to identify devices without download capability in runtime * trivial: debian: remove some unneeded lintian * trivial: debian: bump compat version * ebitdo: Add SN30Pro+ to recognized quirk list (Fixes: #1503) * dfu: Add several quirks for Realtek camera hardware * dfu: Always mark devices as UPDATABLE * uefi: use `genpeimg` to mark ASLR and DP/NX on EFI binary * trivial: solokey: correct a typo * trivial: fu-util: fix typo * uefi: rework ESP path detection and lifecycle * trivial: uefi: show more metadata in to_string method * trivial: fu-device: add new method to remove metadata * Add a plugin to update VIA USB hub hardware * trivial: Add fu_common_read_uint8_safe() * trivial: Fix two typos in fu_common_read_uint16_safe() * solokey: Allow parsing firmware with fwupdtool * Allow fwupdtool to dump details of common firmware formats * trivial: Do not do system coldplug when using FU_ENGINE_LOAD_FLAG_NO_ENUMERATE * trivial: fu-self-test: set polling self tests to slow * trivial: fu-tool: Allow `detach`/`attach` to prompt for device * Strip trailing whitespace from USB descriptors * trivial: Add fu_common_read_uint16_safe() * trivial: Add version to the FuFirmware->to_string() output * Add fu_firmware_set_version() * Add a systemd preset file for `fwupd-refresh.service` * trivial: dell: work around a memory leak caught by address sanitizer * ebitdo: if the device has the will disappear flag, don't wait for ack (Fixes: #994) * Add a new plugin for working with eMMC devices (Fixes: #1455) * fu-engine: Check multiple plugins if quirks match * trivial: don't try to enable LVFS from systemd * trivial: coreboot: fix a clang compiler error * fu-util: Add user friendly strings for all device flags * Add new device flags indicating update resilience * plugins: Add coreboot plugin * fu-plugin: Add fu_plugin_get_hwid_replace_value * trivial: Increase verbosity when actually updating devices * trivial: Allow plugins to use WAIT_FOR_REPLUG in prepare and cleanup * Add FuDevice->prepare() and FuDevice->cleanup() vfuncs for future use * dfu: Implement FuDevice->to_string() * trivial: colorhug: fix a crash that occurs when flashing sometimes * trivial: fu-util: break out of automatic reports if one is not automatic * thunderbolt: some more clarifications when using ICL * trivial: fwupd-refresh: activate motd if using systemd v243 or later * trivial: fwupd-refresh: allow exit code 2 for success * trivial: synaptics-cxaudio: Add Google Pixel buds * trivial: arch: ci: Wait some time for tpm_server to start up * Allow a custom FuFirmwareImage->write() in superclassed objects * dfu: Remove two completely unused helpers * dfu: Make DfuFirmware derive from FuFirmware * dfu: Make DfuImage derive from FuFirmwareImage * dfu: Remove private headers that do not need to exist * Fix device flag filtering * trivial: fu-engine: Don't compare device and content checksums * fu-engine: Read all releases and convert versions when comparing * Add new flags `can-verify` and `can-verify-image` * trivial: make verify and verify-update safer * trivial: test: add checksums for "stock" 1.2.2 * trivial: fu-udev-device: use parent udev device to indicate `internal` * trivial: fix TPM2 simulator tests for arch * trivial: uefi: don't add PCRs with all 0's * trivial: Fix a recent regression causing a double-free * synaptics-cxaudio: Support the ThinkPad USB-C Dock Gen2 * trivial: fu-util: add some extra checks around automatic reports * trivial: fu-tool: typo * fu-systemd: Use correct method for stopping units. * trivial: fu-udev-device: Use ID_PCI_CLASS_FROM_DATABASE if name not set * trivial: fu-plugin: quiet down debug output for optionrom plugin * 8bitdo: use will-disappear flag for sf30/sn30 controllers (Fixes: #783) * trivial: ebitdo: don't dump out firmware header unless plugin verbose * trivial: ebitdo: don't use local errors when writing firmware * Add a new device flag for indicating device won't come back * wacom-emr: Fix a regression for EMR devices * Add a generic DFU firmware object for plugins to use * dfu: Use FwupdInstallFlags rather than a DFU-specific version * dfu: Remove functionality for modifying DfuSe files * dfu: Remove functionality you can do now with fwupdtool * dfu: Remove the merge command as it's unused and broken * trivial: Add fu_firmware_parse_file() helper for future use * trivial: Remove the fuzzing details for DfuPatch * trivial: Add klass->to_string for superclassed FuFirmwareImage objects * dfu: Remove DfuPatch as no vendor actually uses this * dfu: Don't wrap provided VID-PID functions * dfu: Use the standard FuDevice custom flags functionality * dfu: Use klass_device->write_firmware() directly * dfu: Use the generic fu_plugin_usb_device_added() function * dfu: Use daemon flags to ignore devices rather than a special flag * dfu: Set the device state directly to avoid proxying signals * dfu: Use the built-in detach() and attach() vfuncs * Read firmware back from the device as a FuFirmware * dfu: Remove a pointless function * dfu: Remove support for the Metadata Store Proposal * dfu: Remove XTEA support * dfu: Remove the SREC and IHEX parsing out of the DFU plugin * ebitdo: Use klass_device->write_firmware like other plugins * trivial: Remove G_BEGIN_DECLS from all private headers * Remove FU_PLUGIN_RULE_REQUIRES_QUIRK as all the plugins now use it * Set all FuUdevDevice plugins to use FU_QUIRKS_PLUGIN * thunderbolt: recognize new 'generation' sysfs attribute * Rename and modernize the udev plugin * synaptics-rmi: Also add the product ID as a GUID without the minor version * synaptics-rmi: Correctly set the payload length rather than hardcoding it * synaptics-rmi: Write the core config correctly * synaptics-rmi: Decode BL7 status failures as actual errors * synaptics-rmi: Add some trivial debugging to help debug a write problem * trivial: uefi: Make efivarvs errors clearer (Fixes: 1330) * trivial: uefi: don't prefix efivar errors * trivial: Remove some now-unused vfuncs * altos: Modernize the plugin to simplify it * Create the custom plugin GType in common code * Reduce more boilerplate in plugins * synaptics-rmi: Check the correct register when querying bootloader mode * trivial: fu-engine: fix never reporting remotes * trivial: fu-util: don't show warnings for no reports to upload * trivial: debian: remove more conffiles from transitions (Closes: #932617) * trivial: debian/control*: Update for fwupdate transition * trivial: Fix a tiny memory leak when starting the daemon * modem-manager: Fix a tiny memory leak when starting the daemon * synaptics-rmi: Copy the behavior of rmi4utils for BL7 detach * synaptics-rmi: Simplify fu_synaptics_rmi_device_read() * synaptics-rmi: Set the version after ->setup has run * synaptics-rmi: Use the correct mask when getting the bootloader mode on BL7 * syanptics-rmi: The build_id is 3 bytes long, not 2 * synaptics-rmi: Read the config partition the same as rmi4utils * Provide a default implementation of common FuDevice actions * thunderbolt-power: avoid checking for bolt support * synaptics-rmi: Add some debugging for BL7 devices * Fix usage of incorrect type for return value * synaptics-rmi: Do as little as possible in device setup * synaptics-rmi: Speed up reading the PDT from 900ms to 30ms * fu-util: add support for a reinstall command * trivial: fu-util/fu-tool: update re-install help text to reinstall * trivial: fu-util: remove double printed message about succesful firmware update * trivial: fu-util: show no updatable devices error for update command * synaptics-rmi: Ignore the ATTN reports from the hardware when reading DATA * synaptics-rmi: Move the fuzzing instructions to the toplevel README * Fuzz the SREC and IHEX file parsers once more * Use parallel fuzzing for the SMBIOS checks too * synaptics-rmi: Fix the packing of the partition table * Add a plugin to update Synaptics RMI4 devices * trivial: Add a parallel fuzzing script * trivial: fu-util: output newline after prompt. * trivial: fix %u output in report upload * Add a --no-domain logging option * trivial: Fix compiler warning for impossible-to-hit condition * Add support for automatically uploading reports * trivial: motd: disable updating motd for now * trivial: fwupd-refresh: fix a clash with fwupd.service (Closes: #941360) * trivial: Fix Fedora CI * trivial: fu-udev-device: fix some assertions * Search up the tree for a vendor name rather than (ab)using the HID_NAME * Add some success messages when CLI tasks have completed * trivial: Put the boolean prompt on the same line as the text * Never show LicenseRef-proprietary to the end user * trivial: snap: correct install hook root directory * Export the instructions for detaching the device * uefi: detect unmounted ESP partitions (Fixes: #1405) * uefi: stop recording efibootmgr output after flash * trivial: post release version bump - Changes from version 1.3.2: * Add support for '' to disambiguate some firmware * thelio-io: Add a plugin to detach the Thelio IO board * trivial: uefi, dell: skip self tests with TPM if non-root (Fixes: #1396) * trivial: dell: quiet the TSS output * trivial: uefi: allow forcing to TPM2 via environment variable * Do not ask the user to upload a report if ReportURI is not set * Do not enumerate physical devices when running the internal self tests * trivial: libfwupd: skip tests if machine-id is empty too * Add a new plugin to update Conexant audio devices * Export the salted machine ID as a daemon property * Fall back to /var/lib/dbus/machine-id when required * trivial: add stalebot (Fixes: #1393) * trivial: dell-dock: correct another write_size error * Align the key values to the text *width* not the number of bytes * trivial: Move dbus directory location for snap too * trivial: Fix some NULL/FALSE confusion * synaptics-prometheus: Fix tiny memory leak when using FuSynapromConfig * trivial: Fix tiny memory leak when using FuSrecFirmware * snap: switch to core18 * trivial: Return the correct property when getting the host product * trivial: fu-util-common: fix description wrapping (Fixes: #1378) * fu-util/fu-tool: Map out changelogs from remotes * fu-util/fu-tool: Better display historical information * fu-history: Update device_modified in sql database during updates * unifying: Use the instance ID to check for supported devices * unifying: Ensure HID++ v2.0 peripheral devices get scanned by the plugin * trivial: Add some more defines to the srec parser * trivial: fix wget command in fu-tool.c * Allow parsing a raw SREC file * trivial: wacom: Add support for second vendor ID * uefi, dell-esrt: Show firmware version when capsule updates unavailable * Add some more debugging to the SREC and IHEX parsers * Print the instance IDs if the GUIDs are unconverted * Add fu_common_bytes_compare_raw() for future usage * Call the set_quirk_kv() vfunc for the superclassed object * uefi: make the TPM optional for runtime again (Fixes: #1362) * trivial: uefi: Make the TCTI output less verbose * Support in AppStream metadata * Include all GUIDs when uploading a report * Do not crash when starting tpm2-abrmd * trivial: Update DBus conf path for example Fedora package * Move D-Bus conf file to datadir/dbus-1/system.d * trivial: Add fu_io_channel_write_byte_array() for future use * trivial: post release version bump - Package new sub-packages typelib-1_0-FwupdPlugin-1_0 and libfwupdplugin1.- Fix file list- Update to version 1.3.1: (jsc#SLE-10751) * Allow disabling all plugins * trivial: Specify the tpm2-tss-devel version in the example spec file * Move to CI Fedora 30 * modem-manager: Fix two build warnings on Fedora 30 * synapticsmst: Add another name quirk for the ThinkPad USB-C Dock * Re-introduce GUID support to fwupdmgr and fwupdtool * uefi-recovery: Add a plugin to add a fake ESRT entry for device recovery * Add a DMI quirk for the Minnowboard Turbot * trivial: Make it easy to disable or enable libflashrom for distros * trivial: Don't use Recommends for RHEL 7 * unifying: fix timeout metadata * ci: arch: minor improvements * unifying: fix timeout * Allow disabling SSL strict mode for broken corporate proxies * trivial: Allow ignoring the daemon version check by using --force * Try to only show DMI product name once * trivial: fu-util-common: Show unknown devices as interesting devices * dell: Use TSS to query and build TPM vendor strings for GUIDs * trivial: dell: show reasons for lack of updates in `UpdateError` * fu-util-common: strip all trailing whitespace in XML description * trivial: fu-common: match all whitespace not just ' ' in `fu_common_strstrip` * fu-util: show release output in get-details again * unifying: use fu_firmware_strparse_uint16 to read be 16bit values * unifying: fix incomplete hex file parsing * fu-util/fu-tool: Print devices, remotes, releases using a tree * Add aliases for `get-upgrades` and `upgrade` * trivial: UEFI skip self tests if library fails to initialize * libfwupd: Add a new private function `fwupd_remote_set_remotes_dir` * trivial: add libtss2-dev into debian/control (Closes: #1324) * trivial: Fix up the GtkDoc Since lines for API only available in 1.3.x * trivial: Post branch version bump * thunderbolt: Add support for kernel safety checks (Fixes: #1312) * Include the kernel release as a runtime version * trivial: fu-util: Drop GUID support from get-devices * synapticsmst: Partially rewrite the plugin (Fixes #1105) * Remove replug flag after the device comes back from reboot * trivial: Fix running the tests on devices with the TPM in v1.2 mode * trivial: fu-util-common: more cleanup related to topology * trivial: fu-util: cleanup fwupdmgr get-details output * trivial: Don't use topology printing in --verbose mode * Make get-devices and get-topology aliases for one another * trivial: Adjust daemon device sorting * Make get-topology more useful by showing all information * trivial: Fix fu_common_string_append_kv() to align properly with idx > 0 * trivial: dell-dock: correct an error preventing write_size from being set * trivial: Do not warn about deprecated declarations * trivial: Update BRs for the example Fedora package * uefi: add test for TPM 2.0 PCR read function * uefi: use tpm2-tss library to read PCR values * fu-common: Use environment variables for systemd managed directories * Use more systemd directives for directories * trivial: fu-util: fix debug output for devices * Allow turning off the timestamp prefix for debugging * Add a ->udev_device_changed plugin vfunc * Add fu_device_rescan() and a FuDevice->rescan() vfunc * Remove the duplicate files in meson.build * Hash the source files when generating the daemon hash * Split up source files in the build script * uefi: add support for tpm2-tools 4.X * trivial: plugins: clarify stance on afuefi.efi * trivial: plugins/: Update README * trivial: disable gtkdoc by default * trivial: update references of hughsie/fwupd to fwupd/fwupd * Publish docs to fwupd.github.io using CircelCI * Add support to integrate into the motd (Fixes: #1270) * Simplify get-devices output to not show un-useful fields * fu-engine/fu-config: Reload metadata store when configuration changes * trivial: If no devices support updates, show messaging (Closes: #1295) * trivial: uefi: set vendor name for system firwmare from DMI data * unifying: update Solaar url * thunderbolt: Fix logic to work properly with ICL thunderbolt controller * Add fu_udev_device_get_device_file() helper * trivial: Fix regression when using fu_device_incorporate() * trivial: Fix a potential crash when using FuPlugin in the self tests * synapticsmst: Make FuSynapticsmstConnection an actual GObject * synapticsmst: Use the same style as other plugins * trivial: Add some helper functions for GByteArray * Do not use FuDevice metadata for the physical and logical IDs * Use fu_common_string_append_kv() in subclassed device * synapticsmst: Use G_DECLARE_FINAL_TYPE to simplify the object * synapticsmst: Add a SynapticsMSTBoardID for another Lenovo dock * trivial: remove unnecessary CUSTOMERID_DELL define * synapticsmst: Add a SynapticsMSTBoardID for a Lenovo dock * synapticsmst: Display the board ID in non-hex form in the error message * synapticsmst: Use a more suitable icon for the device * trivial: Remove unused variable * Never use memcpy() in a possibly unsafe way * Add a ->to_string() vfunc to FuFirmware * Use FuFirmware as a container for firmware images * Allow filtering devices when using the command line tools * Be more accepting when trying to recover a failed database migration * trivial: Add translation for X-ThunderboltController * trivial: fixup standalone installer * modem-manager: add counterpart GUID for the DW5821e * solokey: Release the interface and rebind the kernel driver on close * fu-tool: Port ability to update a single device from fwupdmgr * uefi: Actually write the new device path if different than before * Allow setting custom flags when using fwupdate * trivial: Do not show a critical warning if no firmware is specified * trivial: Fix overzealous search-replace action in user string * Verify we don't break the ABI * Fix a crash when stopping the fwupd service * Relax the certificate time checks in the self tests for the legacy certificate * trivial: add cache directory into systemd unit rw paths * Never show AppStream markup on the console * Do not segfault when trying to quit the downgrade selection * trivial: Update icons for Thunderbolt and MST devices * Add support for the SoloKey Secure * trivial: Allow a device to *clear* a firmware version * trivial: debian: For signed package fill out Built-Using (Closes: #932757) * Allow specifying GUID to check any version exists * trivial: post release version bump * Release fwupd 1.2.10 * Disable the flashrom plugin by default * trivial: thunderbolt: catch failure setting up device * dell-esrt: Improve the experience for the plugin (Closes: #1245) * fu-util: When unlocking prompt for reboot if applicable * remove those PIDs with Bluetooth interface, Wacom updater doesn't support updating from Bluetooth interface * flashrom: Only show DEBUG and DEBUG2 output if using --plugin-verbose=flashrom * flashrom: Only call flashrom_programmer_init() on whitelisted boards * flashrom: Fix no version format set * fu-util: Show devices with an UpdateError in get-devices output * trivial: uefi: use UEFI-dummy for device ID instead of just uefi * trivial: fix error handling for non UEFI case (#1220) * Add a specific error code for the low battery case * Fix Fedora docker build missing directory: dist * uefi: Determine whether running in legacy mode or not (Fixes: #1220) * trivial: ci: debian: Only turn on flashrom when running CI * trivial: Fix typos in error messages * Allow client code to construct objects from GVariant blobs * Export functionality to build an array of objects * flashrom: Use libflashrom * trivial: Fix the version script to pick up boxed types * trivial: Correctly order the map entries according to vercmp rules * trivial: Fix pylint issue in the version script * Add meson target to fix translations * Add support for 8bitdo USB Retro Receiver * Use the newer features of GRWLock rather than reinventing it * Revert "Allow SuperIO updates to be done live" * uefi: Try to find a duplicate using the loadopt name * uefi: Provide a quirk to disable the use of the UX capsule * trivial: uefi: use the path for efibootmgr that was detected * synaptics-prometheus: Fix installing CONFIG firmware updates * synaptics-prometheus: Set the install duration from a quirk * synaptics-prometheus: Don't emit critial warning when updating config firmware * synaptics-prometheus: Fix missing field in the IOTA reply struct * Create SECURITY.md * redfish: Never set NULL device name * modem-manager: Never set NULL device name * ata: Never set NULL device name * trivial: Add some parameter guards to FuDevice * trivial: snap: make polkit directories if they don't exist (Fixes: #1205) * trivial: fu-main: clarify missing PK file error * synapticsmst: fix GUID generation (Closes: #1207) * Lite Mk II flag for use-shim-unique * trivial: circleci: try to fix automatic snap deployment * Allow SuperIO updates to be done live * fu-util-common: Support empty proxy strings (Fixes: #1199) * trivial: uefi: clarify error message * trivial: Fix non-systemd build * trivial: Sync example spec file with downstream * trivial: post release version bump - Drop fwupd-bsc1143905-hash-the-source-files.patch: Applied upstream. - Add pkgconfig(tss2-esys) BuildRequires: New dependency. - Add gtk-doc BuildRequires and pass gtkdoc=true to meson, build api docs even when using source service.- Add fwupd-bsc1143905-hash-the-source-files.patch to hash the source files instead of libfwupdprivate.a to avoid the checksum change due to the random naming LTO profile sections (bsc#1143905)- Update to version 1.2.10: * Disable the flashrom plugin by default * dell-esrt: Improve the experience for the plugin (Closes: #1245) * fu-util: When unlocking prompt for reboot if applicable * remove those PIDs with Bluetooth interface, Wacom updater doesn't support updating from Bluetooth interface * flashrom: Only show DEBUG and DEBUG2 output if using - -plugin-verbose=flashrom * flashrom: Only call flashrom_programmer_init() on whitelisted boards * flashrom: Fix no version format set * fu-util: Show devices with an UpdateError in get-devices output * Add a specific error code for the low battery case * Fix Fedora docker build missing directory: dist * uefi: Determine whether running in legacy mode or not (Fixes: #1220) * Allow client code to construct objects from GVariant blobs * Export functionality to build an array of objects * flashrom: Use libflashrom * Add meson target to fix translations * Add support for 8bitdo USB Retro Receiver * Use the newer features of GRWLock rather than reinventing it * uefi: Try to find a duplicate using the loadopt name * uefi: Provide a quirk to disable the use of the UX capsule * synaptics-prometheus: Fix installing CONFIG firmware updates * synaptics-prometheus: Set the install duration from a quirk * synaptics-prometheus: Don't emit critial warning when updating config firmware * synaptics-prometheus: Fix missing field in the IOTA reply struct * Create SECURITY.md * redfish: Never set NULL device name * modem-manager: Never set NULL device name * ata: Never set NULL device name * synapticsmst: fix GUID generation (Closes: #1207) * Lite Mk II flag for use-shim-unique * fu-util-common: Support empty proxy strings (Fixes: #1199) - Add python3-setuptools to BuildRequires for generate-version-script.py- Update to version 1.2.9: * Release fwupd 1.2.9 * trivial: Add two new translatable strings for new category types * Check if the system is offline during install, rather than at startup * Prompt the user to shutdown if requried when installing by ID * Use the correct file extension for the offline updates cache * trivial: Allow using --force to use the wrong daemon version * trivial: Display the correct expected command * standalone-installer: Be smarter about existing installed fwupd * Add a plugin to update Synaptics Prometheus fingerprint readers * trivial: standalone-installer: rename uninstall argument to cleanup * fu-util: Check the daemon version is at least the client version * fu-util: Check that daemon is started by expected unit * fu-util-common: when stopping a daemon, check for snap too * Allow using --force to trigger a duplicate offline update * trivial: Allow using FuUsbDevice without a GUsbDevice * trivial: Copy the icons if unset for the device child * trivial: Copy the physical ID if unset for the device child * trivial: Ensure the parent ID is up to date if the device ID changes * trivial: Fix typo when setting the parent ID * trivial: Disable the flatpak CI build * Allow handling FORCE for devices that subclass FuDevice * uefi: Fix a libasan failure when reading a UEFI variable * trivial: Fix a memory leak found using libasan * trivial: Fix an libasan failure in the dell plugin * trivial: Fix some dead code spotted by coverity * trivial: Fix a typo spotted by coverity * trivial: Fix a missing config.h include in a new source file * Dynamically read path to use for /system-update * Display the remote warning on the console in an easy-to-read way * ata: Set version format to plain for devices obtained from udev * trivial: Only apply SmbiosManufacturer to release version for internal * trivial: Fix two bugs in the hardware self tests script * Never guess the version format from the version string * Only force a semver when the device opts-in * Export the version-format to clients * Add missing gtk-doc documentation * dfu: Add some trivial, but useful, debugging for AVR DFU devices * dfu: Correctly identify DFU firmware that starts at offset zero * dfu: Don't keep showing trivial debug output * dfu: Reset the forced version during attach and detach * ata/nvme: For devices running Dell firmware, set `VersionFormat` (Fixes: #1169) * fu-engine: Check if VersionFormat is ambiguous when adding devices * trivial: Fix fwupdate --apply * Only use class-based instance IDs for quirk matching * trivial: dell-dock: set minimum board to 6 * trivial: post release version bump- Update to version 1.2.8: * Don't upload reports when the user has configured their system in a broken way * Allow setting the daemon verbose domains at runtime * Allow fwupdmgr to modify the daemon config * Do not compare version formats when the release format is unknown * Do not fall back integers to a plain version format * Use the device version format when converting the release version * Set the VersionFormat using the metadata or the UEFI quirk - Changes from version 1.2.7: * l10n: Create Lithuanian translation file * l10n: Update LINGUAS * Updated: Add support for 8BitDo M30. * modem-manager: increase the timeout to wait for modem after uninhibited * modem-manager: implement qmi pdc active config selection as attach() * fu-engine: When removing activation flag match the correct version * Require --force to install a release with a different version format * Match the old or new version number when setting NEEDS_REBOOT * Make an error message clearer when there are no updates available * Add support for the not-child extension from Logitech * thunderbolt: Set require-ac for Thunderbolt devices (Fixes: gh#hughsie/fwupd#1142) * Fix some typos spotted using codespell * Add a component categories to express the firmware type * fu-tool: Port get-history command to fwupdtool * Recreate the history database if migration failed * Move the core built-in 'fwupd' remote over to the dell-esrt plugin * snap: Add a custom systemd unit to call activation on shutdown (Fixes: gh#hughsie/fwupd#1125) * ata: Flush cache before standby and activate * synapticsmst: blacklist plugin when using amdgpu (Fixes: gh#hughsie/fwupd#1121) * uefi: add a new option to specify the os name * Return the newest device when using fu_history_get_device_by_id() * uefi: More carefully check the output from tpm2_pcrlist * uefi: Don't overwrite CustomFlags if set from a quirk * Shut down the daemon if the on-disk binary is replaced * ata: Correct activation functionality * Fix version comparisons after reboot for some formats * fu-tool: save history from stuff installed with `fwupdtool` - Changes from version 1.2.6: * ata: send ATA standby immediate when activating firmware * offline: Be more graceful when dealing with Plymouth failures * Save the new version in the history database for offline updates * Show the DeviceID when showing the updates list * Allow forcing an offline-only update on a live system using --force * Do not schedule an update on battery power if it requires AC power * superio: Add InstallDuration default value * superio: Add support for writing new e-flash contents * superio: Fix reading the attestation checksum * superio: Add support for reading the device checksum * superio: Use the chipset ID in the device name * superio: Move the device flush before getting the register map * superio: Move all the IT89xx code to a subclassed device object * superio: Move all the IT85xx code to a subclassed device object * superio: Split and export fu_superio_device_ec_writeX() * superio: Remove the port from fu_superio_device_ec_read() * superio: Move the register read/write into the FuSuperioDevice object * superio: Check the IOBAD0 is usable during setup * superio: Use fu_device_set_firmware_size() * superio: Move some constants out to the common header * superio: Use GObject properties in FuSuperioDevice * superio: Convert FuSuperioDevice to be derivable * Update Plymouth when updating pending firmware * Ask to reboot after scheduling an offline firmware update * Do not fail when scheduling more than one update to be run offline * Allow running offline updates when in system-update.target * Fix the location of fwupdoffline in the service file * Add optional vfuncs to allow detaching and attaching verify() * superio: Add list of SPI commands for future usage * Add a verify-update command to fwupdtool * uefi: Actually upload the UPDATE_INFO entry for the UX capsule * superio: Get the chip size from the EC rather than hardcoding * uefi: Check the error code of QueryCapsuleCapabilities() correctly * Update the UEFI UX Capsule Header checksum when needed. * uefi: Copy the shimx64.efi binary for known broken firmware * Correctly get the check the new version for devices that replug * Add a simple script to add a capsule header * Ensure the PKCS-7 client certificate exists at startup * fix makecab directive options * fwpup.service: use display-manager.service instead of gdm.service * Allow signing the fwupd report with the client certificate * Add a D-Bus method to generate a signature using the self-signed client certificate * Allow signing and verifying data using a PKCS-7 self-signed client certificate * Fix a critical warning when loading a PKCS-7 certificate with no DN * Include all device checksums in the LVFS report * modem-manager: Fix a trivial build warning * superio: Fix a trivial build warning * Move out the offline update functionality to a new binary * Do not reboot when failing to start fwupd during offline updates * Do not write the schema version to the db when loading * Do not recreate XbSilo caches when running on a readonly filesystem * Add the fwupdagent binary for use in shell scripts * Allow restricting firmware updates for enterprise use * standalone-installer: new --allow-older and --allow-reinstall options * Show the upgrade and downgrade flags when getting releases for a device * Rename FwupdRelease:trust-flags to FwupdRelease:flags * fu-tool: Save device state to @LOCALSTATEDIR@/lib/fwupd/state.json on actions * modem-manager: implement support for qmi-pdc * Add a plugin to support ModemManager hardware * fu-tool: Don't let failing to find dbus prevent engine from starting * ata: Support delayed activation * dell-dock: Use activation when calling fwupdtool activate * Add a support for delayed activation * uefi: Fix the self tests when running on Fedora SilverBlue * Do not fail to start the daemon if tpm2_pcrlist hangs * po/make-images.sh: quote LOCALEDIR and PYTHON3 * meson: print stderr of python3 command instead of stdout * Revert "contrib/debian: Switch to debian unstable" * Add elogind support - Changes from version 1.2.5: * uefi: fix segfault in fwup_set_update_statuses * Show in Flathub correctly * debian: explicitly depend on shared-mime-info * superio: Implement detach() and attach() * superio: Correct the names of some constants and improve debugging support * dell-dock: Filter the last supported payloads of certain board 4 SKUs * circleci: Manage the lifecycle of the snap * Add support to run snap build in CircleCI * wacom-usb: Use the correct buffer format for the touch module * wacom-usb: Set the install duration for each device type * wacom-usb: Return with an error if there were too many retries * wacom-usb: Make updating less verbose * Convert all child instance IDs when converting the parent * uefi: Allow devices to create more complete fake UEFI devices * unifying: Fix regression when recovering from failed flash * Ensure libxmlb dir exists for LGTM.com * Add C build configuration for LGTM.com * Use G_BEGIN_DECLS correctly for internal headers * standalone-installer: Fix issue found by LGTM * Use '#pragma once' to avoid a lot of boilerplate * Force LGTM to see Python 3 * fwupd: Hide firmware-packager behind meson option` * fu-common-cab: Correct handling of CAB files w/ nested directories and older libgcab * Fix a regression in using the InstanceIDs for quirk matching * thunderbolt: Convert the instance IDs as we never open the device * udev: Manally call fu_device_setup() to convert the instance IDs * fu-tool: Correct a crash caused by calling fwupdtool update * fu-tool: Don't fail if dbus is unavailable * contrib/debian: Switch to debian unstable * wacom-usb: Record the block number when failing * wacom-usb: The touch address is big endian * wacom-usb: Accept a non-binary IHEX file for the touch update * wacom-usb: Only poll when the device status is 'busy' * wacom-usb: Only reboot the device when all composite devices have been updated * wacom-usb: Fix flashing failure with latest Intuos Pro tablet * dfu: Fill holes when reading SREC files * Add fwupd_guid_from_string() to drop dep on uuid * wacom-raw: Check the InstanceID rather than GUID * Defer the InstanceID->GUID hashing until after setup * ata: Check for USB enclosures as well * Do not use efivar just to print a mixed endian GUID * Add fu_device_add_instance_id() and prefer explicit conversion * Report the DeviceInstanceIDs to `fwupdmgr get-updates` * Export some of the GUID functionality * Allow a plugin to set _ANOTHER_WRITE_REQUIRED to run more than one plugin * nvme: Add an extra check for Dell plugins to avoid false positives * ata: Add support for detecting Dell GUIDs * Fix the self tests when using glib2 >=2.59.0 * Add support to call composite prepare and cleanup using fwupdtool * uefi: Disable -Wno-address-of-packed-member * uefi: Don't unconditionally enable Werror for the EFI binary * Disable -Wno-address-of-packed-member - Changes from version 1.2.4: * Remove the autogenerated headers in the gettext files * ata: Default to the non-activation 0xE subcommand * fastboot: Use a much longer timeout as the removal delay * fu-progressbar: be more quiet when running non-interactive * fu-tool: Show UpdateMessage if applicable for install command * dfu: Simplify the SREC parser to avoid a crash with an invalid file * wacom-raw: Use the correct error codes when the panel is not supported * wacom-usb: Add some more information to the README * fu-keyring-utils: Don't fail missing PKI directory when compiled with GPG/PKCS7 * dell: Check that the flash interface command is available * wacom-usb: Fix the plugin name to allow devices to be updated * fastboot: flash the partition after downloading the file * uefi: Add a quirk to use the legacy bootmgr description * ata: Mark all devices as needing a reboot * ata: Add a new plugin to upgrade firmware on ATA/ATAPI hardware * udev-device: Add a utility function for debugging * udev-device: Set the firmware revision automatically * udev-device: Set the serial number automatically * udev-device: Fall back to non-database model and vendor values * udev-device: Fix critical warning if the device has no parent * dell-dock: Add support for a passive flow * Add support for an `UpdateMessage` and display it in tools * fu-tool: Port the `get-updates` command over * When using `directory` remote type automatically generate metadata * libfwupd: Add support for new remote type "directory" * Ensure cabinet archives always have a container checksum * Add support for a per-release source and details URL * When generating a CAB Silo use the prefix "components" * uefi: Add a trivial debugging statement to debug a UX capsule failure * uefi: Use fwup_new0() to allocate the updates table array * nitrokey: Correct Nitrokey Storage invalid firmware version read * dell-dock: Add support for flashing Thunderbolt over I2C * wacom-raw: Add a plugin to update Wacom embedded EMR and AES panels * fu-util/fu-tool: sync up reboot and shutdown behavior * dfu: Ignore the SUB ASCII value * dfu: Fix the parser to support extended segment addresses * dfu: Support ihex files with leading comments don't show an error * uefi: Correct a boot order creation bug (Fixes: gh#hughsie/fwupd#956) * uefi: Remove all variable length arrays * uefi: Fix a logic bug in fwup_search_file() * uefi: Use _cleanup_free in one more place * uefi: Do not pass required attrs to fwup_delete_variable() * uefi: Delete the old Linux-Firmware-Updater boot entry * uefi: Use the GNU-EFI BOOL type * Check if plugin changed after the device attaches or detaches * uefi: Refactor and simplify the EFI loader * Show a console warning if loading an out-of-tree plugin * UEFI: Do the UX checksum calculation in fwupd * wacom-usb: Add two more Intuos tablets * nvme: Add the needs-shutdown quirk to Phison NVMe drives * Add _NEEDS_SHUTDOWN flag for devices * Use GCC __cleanup__ features in the EFI loader * nvme: Add flag to support manually aligning the firmware to the FWUG value * nvme: Support FGUID to get the SKU GUID * nvme: Support FWUG to get the write block size * nvme: Add trivial comment to clarify address bitshifting * uefi: Do not check the BGRT status before uploading a UX capsule * dfu: Fix flashing various Jabra devices * upower: Add support for checking battery percentage * nvme: Check the return code of the admin passthru ioctl * fu-tool: Add support for an 'update' command to fwupdtool * dell-dock: Set minimum board to board 4 * dell-dock: Workaround a manufacturing bug for board level 4 * dell-dock: Wait longer for re-enumeration on TBT SKU * superio: Support IT89xx devices * fu-main: remove incompatible locale error message * Add a new plugin checklist (Fixes: gh#hughsie/fwupd#899) - Dropped obsolete patch: fwupd-bsc1130056-change-esp-os-name.patch (upstream PR: gh#hughsie/fwupd#1119 - Fixed fwupd-bsc1130056-change-shim-path.patch so that it works with the new files - Cleaned up changelog- Stop shipping polkit rules, as we have the distro specific setup in polkit-default-privs (boo#1125428).- Add fwupd-bsc1130056-change-esp-os-name.patch to change the OS directory in ESP (bsc#1130056) - Add fwupd-bsc1130056-change-shim-path.patch to set the default shim binary for openSUSE/SLE (bsc#1130056) - Link fwupd*.efi.signed to fwupd*.efi as requested by fwupd (bsc#1129466)- fwupd.spec: fix shell syntax error in %postun section (boo#1120363).- Update to version 1.2.3: * Correctly migrate the history database - Changes from version 1.2.2: * Log an error if started with an incompatible locale * Fix building with -Wl,-z,defs * ebitdo: Fix the reported version number if the daemon locale is not C.UTF-8 * Add Dell TB18DC to the known devices list * Allow replacing the last byte in the image when using 'dfu-tool replace-data' * Check the device checksum as well as the content checksum during verify * Submit the device firmware checksum and update protocol in the submitted report * Include the device checksum and update protocol in the historydb * uefi: Add the PCR0 value as the device checksum for system firmware * Add new API to get the release protocol from the metadata * Allow plugins to define support for a 'well-known' protocol * uefi: When adding headers set the header size to 4k * uefi: Append the header on capsules without headers from Linux * flashrom: Ensure the quirks database is set on the new object * uefi: Do not add devices with invalid GUIDs * Do not allow a GUID of zero * Add shared functionality for reading and writing with O_NONBLOCK * Only run attach and detach if the device is in the wrong mode * Sanitize the version if the version format has been specified * wacom-usb: Remove the DTH generation hardware as it will not work with fwupd * thunderbolt: Remove a superfluous boundary condition when verifying update * Add a plugin to update hardware that supports fastboot * Fix a regression when doing GetReleases on unsupported hardware * dfu: Require a specific USB class and subclass for DFU mode * Correctly parse format the version numbers correctly using old metadata * amt: Fix a crash if AMT returns an empty response * Check plugins set error on failure * contrib: Add a simple python3 client * installed-tests: Adjust to actually use a remote for installed tests * Add more standard USB identifier GUIDs * wacomhid: Rename to wacom-usb * Provide a way for plugins to decompress a custom archive to ram - Changes from version 1.2.1: * Remove DaemonVersionFormat=quad * Shut down the daemon after 2h of inactivity * Create a silo index to speed up GUID queries * Fix flashing the 8bitdo SF30 * Speed up fwupd startup by loading less thunderbolt firmware * Query the XbSilo when calling fu_plugin_check_supported() * Guess the version format when it is not provided * Fix a use-after-free when using valgrind and --immediate-exit * Add per-release install duration values * Fix showing the custom remote agreements * Be more explicit setting the update state * Include the os-release information in the release metadata - Changes from version 1.2.0: * ebitdo: remove SF30/SN30 pro device ids * dell-dock: Drop delayed MST callback routine * synapticsmst: Adjust EVB board handling * synapticsmst: Remove the content checking of firmware * synapticsmst: Access Board ID through memory instead In firmware images HDCP 2.2 will be enabled by default,so access to flash region will fail.` * contrib: Adjust flatpak build for moving to flathub * dell-dock: Prefer to flash VMM5331 via I2C instead of DP aux * Use HTTPS_PROXY if set * firmware-packager: Make it clearer to use * Sort the firmware sack by component priority * flatpak: Update gnu-efi to latest version * amt: Set the full device version including the BuildNum * fwupdmgr/fwupdtool: Move monitor command to fwupdtool * fwupdmgr/fwupdtool: Move firmware builder from fwupdmgr to fwupdtool * Add version format quirks for several Lenovo machines * uefi: Set the quirks on created devices * dell_dock: Use correct offset for finding version of MST * dell-dock: Add missing unlock call for MST via dell_dock plugin * Support the Intel ME version format * Port from libappstream-glib to libxmlb * Bump requirement to meson 0.46.0 * fu-main: Catch SIGTERM while update is in progress * fu-tool: Stop any running daemon over dbus before loading engine * meson: Bump dependency to 0.44 and adjust sysconfdir handling * dell-dock: If marketing name is invalid don't fail initialization * Readme Updated: Added KDE Discover as one more graphical front-end available for fwupd. * dell-dock: Correct a situation that error wasn't propagating * Don't segfault if a plugin returns FALSE from UpdateFunc with no error set * dell-dock: Use different debug strings for each device type * dell-dock: Don't use the VLA feature in the new dock * Add a plugin for an upcoming Dell USB-C dock * contrib: Add information on how to use debugging scripts * Allow setting the version format from a quirk entry * Don't use AppStream-glib for string helpers * Don't use AppStream-glib for version helpers * Don't use AppStream-glib for the GUID helpers * fu-device: Ensure that parent ID is created before creating quirked children * Update all sub-devices for a composite update * Stop showing the current release during updates in fwupdmgr * uefi: Move the TPM unlocking functionality from the Dell to UEFI plugin * Run the Dell plugin initialization after the UEFI plugin * thunderbolt-power: Fix possible linker problem * Allow firmware files to depend on versions from other devices * fu-debug: Redirect all debugging output to stderr instead of stdout * synapticsmst: Adjust panamera ESM update routine for some reported issues * fu-engine: Optionally wait for replug before updating a device * fu-device-list: Use delayed device removal when removing the tree * thunderbolt: Use replugging from the daemon * Add support for devices to show an estimated flash time * Marked some CL options for translation * ci: Run clang static analysis for Ubuntu build rather than just clang compiler * nvme: Initialize the buffer before reading the contents * contrib: Add a standalone installer creation script * rts54hid: Add support for Realtek USB devices using vendor HID commands * fu-engine: Don't show devices pending a reboot in GetUpgrades * Add FuMutex helper to make various parts of the daemon thread-safe * rts54hub: Add support for Realtek USB devices using vendor HUB commands * uefi: Check the amount of free space on the ESP * fu-tool: Import debugging options from fu-debug like fu-main * superio: Set the physical and logical IDs - Add pkgconfig(xmlb) BuildRequires: New dependency.- Add pesign-obs-integration to BuildRequires and add fwupd*.efi to BRP_PESIGN_FILES to get it signed - Add LC_IMAGES and use efivar only if %{with efi_fw_update} + Also update the version requirement of efivar - Disable Redfish and NVME plugins if %{without efi_fw_update} since those two plugins require efivar - Remove fwup from BuildRequires since fwupdate is already merged into fwupd.- Use gnu-efi only if %{with efi_fw_update}, always use pkgconfig(efivar) - Fix file list- Amend %post and %postun to install/uninstall fwupd*.efi to the EFI system partition + Also add shim to Requires for fwupdx64.efi - Mark fwupdate as obsolete + fwupdate has been merged into fwupd since fwupd 1.1.0.- fwupd is require for thunderbolt firmware update in SLE15-SP1(fate#322681)- Update to version 1.1.2: + New Features: - Add a new device flag "ignore-validation" that will override checks - Add a new plugin to enumerate EC firmware - Add a new plugin to update NVMe hardware - Add a plugin for updating using the flashrom command line tool - Allow the device list to take care of waiting for the device replug - Allow updating just one specific device from the command line - Allow upgrades using a self-signed fwupd.efi binary - Download firmware if the user specifies a URI - Include serial number in daemon device output when trusted - Notify all plugins of device removals through a new vfunc - Use boltd force power API if available + Bugfixes: - Add an install hook for classic snap - Allow forcing installation even if no AC power is applied - Allow using --force to ignore version_lowest - Always use the same HardwareIDs as Windows - Check the device state before assuming a fake DFU runtime - Copy over parent GUIDs from other plugin donors - Detect location of python3 interpreter - Do not add udev devices after a small delay - Don't fail to run if compiled without GPG/PKCS7 - Fix a segfault in fwupdtool caused by cleanup of USB plugins - Implement the systemd recommendations for offline updates - Improve performance when reading keys from the quirk database - Remove children of devices when the parent is removed - Rewrite synapticsmst to use modern error handling - Rewrite the unifying plugin to use the new daemon-provided functionality - Show a time estimate on the progressbar after an update has started- Use noun phrase for summary. Trim request for comments from description.- Update to version 1.1.1: + New Features: - Add support for the Synaptics Panamera hardware - Add validation for Alpine and Titan Ridge - Improve the Redfish plugin to actually work with real hardware + Bugfixes: - Allow different plugins to add the same device - Allow flashing unifying devices in recovery mode - Allow running synapticsmst on non-Dell hardware - Check the ESP for sanity at at startup - Do not hold hidraw devices open forever - Don't override _FORTIFY_SOURCE when building the EFI binary - Don't show passwords in fwupdmgr - Fix a potential segfault in smbios data parsing - Fix encoding the GUID into the capsule EFI variable - Fix various bugs when reading the thunderbolt version number - Reboot synapticsmst devices at the end of flash cycle - Show status messages when the daemon is initializing - Show the correct title when updating devices - Show the reasons that plugins are not run on the CLI - Use localedir in po/make-images- Run %udev_rules_update in post as package install udev rules- Update to version 1.1.0: (FATE#326702) + New Features: - Add a initial Redfish support - Add a tool to mimic the original fwupdate CLI interface - Allow devices to assign a plugin from the quirk subsystem - Change the quirk file structure to be more efficient - Merge fwupdate functionality into fwupd - Run a plugin vfunc before and after all the composite devices are updated - Support more Wacom tablets + Bugfixes: - Add release information for locked devices - Allow building with older meson - Detect the EFI system partition location at runtime - Do not use 8bitdo bootloader commands after a successful flash - Enable accesing downloaded files in flatpak and snap - Fix a potential buffer overflow when applying a DFU patch - Fix downgrading older releases to devices - Fix flashing devices that require a manual replug - Fix several small memory leaks in various places - Fix the retrieval of Redfish version - Fix unifying failure to detach when using a slow host controller - Set the Wacom device status when erasing and writing firmware - Show errors in the CLI if unable to access directory - Use the parent device name for Wacom sub-modules - Removed enable_pkcs7_when_testing_only.patch- Update to version 1.0.8: + New Features (including version 1.0.7): - Add an plugin to update some future Wacom tablets - Add 'fwupdmgr get-topology' to show logical device tree - Add support for creating a flatpak - Add support for creating a snap - Add support for Motorola S-record files - Add the Linux Foundation public GPG keys for firmware and metadata - Show a translated warning when the server is limiting downloads - Add enable-remote and disable-remote commands to fwupdmgr - Add fu_plugin_add_compile_version() for libraries to use - Allow requiring specific versions of libraries for firmware updates - If no remotes are enabled try to enable the LVFS - Show a warning with interactive prompt when enabling a remote + Bugfixes (including version 1.0.7): - Add a firmware diagnostic tool called fwupdtool - Adjust all licensing to LGPL 2.1+ - Allow installing more than one firmware using 'fwupdmgr install' - Allow specifying hwids with OR relationships - Do not call fu_plugin_init() on blacklisted plugins - Do not require libcolorhug to build - Fix a crash in libfwupd where no device ID is set - Fix a potential DoS in libdfu by limiting holes to 1MiB - Fix a segfault that sometimes occurs during cleanup of USB plugins - Fix Hardware-ID{0,1,2,12} compatibility with Microsoft - Hide devices that aren't updatable by default in fwupdmgr - Search all UEFI GUIDs when matching hardware - Stop matching Nintendo Switch Pro in the 8bitdo plugin - Check that EFI system partition is mounted before update - Disable synapticsmst remote control on failure - Don't recoldplug thunderbolt to fix a flashing failure - Fix SQL error when running 'fwupdmgr clear-offline' - Improve the update report message - Only enumerate Dell Docks if the type is known - Only run certtool if a new enough gnutls is present - Prevent a client crash if the daemon somehow sends invalid data - Reboot after scheduling using logind not systemd - Use the right encoding for the label in make-images - Added/backported enable_pkcs7_when_testing_only.patch: + needed to disable pkcs7 test during build (can be removed for fwupd >= 1.0.9)- Update hasbang in installed files from /usr/bin/env python3 to /usr/bin/python3.- Update url - Small packaging cleanup with spec-cleaner- Update to version 1.0.6: + New Features: - Add bash completion for fwupdmgr. - Add support for newest Thunderbolt chips. - Allow all functions that take device arguments to be prompted. - Allow devices to use the runtime version when in bootloader mode. - Allow overriding ESP mount point via conf file. - Delete any old fwupdate capsules and efivars when launching fwupd. - Generate Vala bindings. + Bugfixes: - Allow ctrl-d out of the prompt for devices. - Allow to create package out of provided binary. - Correct handling of unknown Thunderbolt devices. - Correctly detect new remotes that are manually copied. - Fix a crash related to when passing device to downgrade in CLI. - Fix running the self tests when no fwupd is installed. - Fix Unifying signature writing and parsing for Texas bootloader. - Only send success and failure reports to the server. - Use a CNAME to redirect to the correct CDN for metadata. - Use a longer timeout when powering back the Thunderbolt device.- Ensure library package has a dependency on main package, otherwise it won't be usable.- Update to version 1.0.5: + New Features: - Offer to reboot when processing an offline update. - Report the efivar, libsmbios and fwupdate library versions. - Report Thunderbolt safe mode and SecureBoot status. - Show the user a URL when they report a known problem. - Support split cabinet archives as produced by Windows Update. + Bugfixes: - Be more careful deleting and modifying device history. - Clarify which devices don't have upgrades. - Ensure the Thunderbolt version is xx.yy. - Fix a daemon warning when using fwupdmgr get-results. - Fix crasher with MST flashing. - Fix DFU detach with newer releases of libusb. - Include the device VID and PID when generating the device-id. - Set the RemoteId when using GetDetails. - Stop matching 8bitdo DS4 controller VID/PID. - Use help2man for dfu-tool and drop docbook dependencies. - Use ngettext for any strings with plurals. - Use the default value if ArchiveSizeMax is unspecified.- Update to version 1.0.4: + New Features: - Add D-Bus methods to get and modify the history information. - Allow the user to share firmware update success or failure. - Ask the user to refresh metadata when it is very old. - Store firmware update success and failure to a local database. + Bugfixes: - Add a device name for locked UEFI devices. - Allow each plugin to opt-in to the recoldplug action. - Fix firmware downloading using gnome-software. - Fix UX capsule reference to the one specified in efivar. - Never add two devices to the daemon with the same ID. - Rescan supported flags when refreshing metadata. - Add pkgconfig(json-glib-1.0) BuildRequires: new dependency.- Update to version 1.0.3: + New Features: - Add a new plugin to add support for CSR "Driverless DFU". - Add initial SF30/SN30 Pro support. - Support AppStream metadata with relative URLs. + Bugfixes: - Add more metadata to the user-agent string. - Block owned Dell TPM updates. - Choose the correct component from provides matches using requirements. - Do not try to parse huge compressed archive files. - Fix a double-free bug in the Udev code. - Handle Thunderbolt "native" mode. - Use the new functionality in libgcab >= 1.0 to avoid writing temp files.- Unbreak compilation on non-x86, upstream renamed options to disable plugins.- Update to version 1.0.2: + Add a plugin for the Nitrokey Storage device + Add support for the original AVR DFU protocol + Allow different plugins to claim the same device + Allow quirks to set common USB properties + Move a common plugin functionality out to a new shared object + Optionally delay the device removal for better replugging + Set environment variables to allow easy per-plugin debugging + Use a SHA1 hash for the internal DeviceID + Add quirk for AT32UC3B1256 as used in the RubberDucky + Disable the dell plugin if libsmbios fails + Don't register for USB UDev events to later ignore them + Fix a possible buffer overflow when debugging ebitdo devices + Fix critical warning when more than one remote fails to load + Fix DFU attaching AVR32 devices like the XMEGA + Ignore useless Thunderbolt device types + Refactor ColorHug into a much more modern plugin + Release the Steelseries interface if getting the version failed + Remove autoconf-isms from the meson configure options + Show a nicer error message if the requirement fails + Sort the output of GetUpgrades correctly - Changes from version 1.0.1: + Add support for HWID requirements + Add support for programming various AVR32 and XMEGA parts using DFU + Add the various DFU quirks for the Jabra Speak devices + Allow specifying the output file type for 'dfu-tool read' + Move the database of supported devices out into runtime loaded files + Support the IHEX record type 0x05 + Use help2man to generate the man page at build time + Use the new quirk infrastructure for version numbers + Catch invalid Dell dock component requests + Correctly output Intel HEX files with > 16bit offset addresses + Do not try to verify the element write if upload is unsupported + Fix a double-unref when updating any 8Bitdo device + Fix crash when enumerating with Dell dock connected but with no UEFI + Fix uploading large firmware files over DFU + Format the BCD USB revision numbers correctly + Guess the DFU transfer size if it is not specified + Include the reset timeout as wValue to fix some DFU bootloaders + Make the error message clearer when sans fonts are missing + Support devices with truncated DFU interface data + Use the correct remote-specified username and passord when using fwupdmgr + Use the correct wDetachTimeOut when writing DFU firmware + Verify devices with legacy VIDs are actually 8Bitdo controllers - Add help2man as BuildRequires.- Fix dependencies and build options for non-x86 architectures. At least FW updates for USB are arch independent, and EFI FW updates can also be applied on Aarch64.- Update to version 1.0.0: * Add the plugin documentation to the main gtk-doc * Add a waiting-for-auth daemon state * Add fwupd_remote_get_checksum() to use in client programs * Generate the LD script from the GObject Introspection data * Prevent fwupd from mounting filesystems * uefi: Do not use system-specific infomation for PCI devices * uefi: Support uploading the firmware splash image * dell: only set coldplug delay when we know we need it * dell: only run SMI to toggle host MST GPIO on systems with host MST * dell: add functionality to blacklist HW with problems * dell: only run on intended chassis * thunderbolt-power: always run after thunderbolt plugin * Allow plugins to depend on each other * Add support for SMBIOSv3 * dell: prefer to use hwids to get DMI keys and DE table * debian: remove /etc/fwupd.conf on upgrade * unifying: Use fu_plugin_check_supported() * Add fu_plugin_check_supported() * unifying: Use a device whitelist to avoid breaking devices * Fix various printing issues with the progressbar * dell: Fix a trivial whitespace issue * Do not fail to load the daemon if cached metadata is invalid * Do not store the newest release as part of the FuDevice object * Add a method to return a list of upgrades for a specific device * Move the downgrade calculation to the daemon * Make FuDevice derive from FwupdDevice rather than FwupdResult * Add a command 'clear-offline' to fwupdmgr * Merge releases where multiple remotes provide the same firmware * Remove the UniqueID property * uefi: Do not set the release version * udev: Do not match USB devices, even with a GUID set * Use the intel-wmi-thunderbolt kernel module to force power * dell: drop thunderbolt force power code * unifying: Add hardcoded summaries for peripheral kinds * Create CODE_OF_CONDUCT.md * Ensure more devices set the device summary * Add an 'Summary' property to each device * Add a human-readable title for each remote * unifying: Disable if the kernel has no CONFIG_HIDRAW support * Move deprecated symbols to a new header * Introduce an s390x cross compile target to CI * Add ModifyRemote as an easy way to enable and disable remotes like the LVFS * Do not auto-open all USB devices at startup * dfu: Use FuDeviceLocker * unifying: Use FuDeviceLocker * colorhug: Use FuDeviceLocker * ebitdo: Use FuDeviceLocker * altos: Use FuDeviceLocker * steelseries: Use FuDeviceLocker * usb: Use FuDeviceLocker * Add FuDeviceLocker to simplify device open/close lifecycles * dfu: Remove DEVO support * dfu: Remove the now-unused symtab support * Remove the ELF support from libdfu and move the code to the altos plugin * Use -Werror when building in Travis CI * Do not install the libdfu helper library * Parse the SMBIOS DMI table directly * usb: Disable the fallback USB plugin * Test for missing language translations at build time * Fix the libdfu self test failure on s390 and ppc64- Update to version 0.9.8: * Add a command 'clear-offline' to fwupdmgr * Do not fail to load the daemon if cached metadata is invalid * Fix a crash when using fu_plugin_device_add_delay() * Fix the libdfu self test failure on s390 and ppc64 * Format the BCD USB revision numbers correctly * Never fallback to an offline update from client code * Prevent fwupd from mounting filesystems * dfu: Allow flashing when the target does not specify an alt-name * dfu: Do not try to verify the element write if upload is unsupported * dfu: Fix uploading large firmware files * dfu: Include the reset timeout as wValue to fix some hardware * dfu: Set the vendor ID to the runtime USB VID * dfu: Use 0x0101 as an alias for 0x0110 * thunderbolt: move test for mock environment (gh#hughsie/fwupd#280) * udev: Do not match USB devices, even with a GUID set * uefi: Do not set the release version * unifying: Disable if the kernel has no CONFIG_HIDRAW support- Update to version 0.9.7: + 10 months worth of bugfixing, integrating more vendor specific Firmware update paths.- Update to version 0.8.1: + Delete duplicate translations (gh#hughsie/fwupd#89). + Do not hardcode docbook2man path. + Fix fwupdmgr timeout with missing pending database. + Fix compiler warnings. + Fix a crash when enumerating devices on a Dell WLD15. + dell: don't initialize libsmbios on unsupported systems. + Do not fail to start on Dell hardware. + Adjust systemd confinement restrictions. + Do not dlclose modules when running under valgrind. + Really remove the NoNewPrivileges systemd confinement. + Release fwupd 0.8.1.- Update to version 0.8.0: + Show a different error when checking for updates while on + battery power (gh#hughsie/fwupd#68). + Clarify the test in --help and man page related to offline + (gh#hughsie/fwupd#69). + libdfu: Use a heuristic for the start address if the firmware + has no DfuSe footer. + dell: Don't return the address of a stack variable. + dell: Fix a possibly-impossible-to-hit buffer overrun. + close USB devices before error returns (gh#hughsie/fwupd#73). + Make libelf support optional. + Always make sure we're getting a C99 compiler. + Fix redeclaration of polkit autocleanup functions. + Uncomment SystemdService parameter in the dbus service file + (gh#hughsie/fwupd#74). + Make all providers and plugins share a GUsbContext. + Unexport libebitdo. + Move the plugins into plugin-specific directories. + Convert the providers to plugins to simplify code and for + future features. + Add support for Logitech Unifying devices. + Add a set of vfuncs that are run before and after a device + update. + Return the pending UEFI update when not on AC power. + Move the UPower functionality to a plugin. + Fix udev plugin loading. + fix dfu plugin loading. + Disable PrivateNetwork on systemd service. + Use more restrictive settings when running under systemd. + dell: add a new method for forcing a controller to flash mode. + Add VerifyUpdate to update the device checksums server-side. + Move the Option ROM parsing to the Udev plugin. + Move the device add delay to shared code. + Add initial skeleton for Intel Thunderbolt support. + unifying: Use the actual bootloader VID/PIDs when in firmware + mode. + Allow the metadata to match a version of fwupd and the existing + fw version. + Add fwupd_result_get_device_version_bootloader(). + Fix the appstream-glib version guards. + dell: Add coldplug methods to let other plugins turn on + TBT/GPIO. + libdfu: Don't read data from some DfuSe targets. + Add the ability to run a prepare->exec->cleanup on coldplug. + Allow plugins to request that all plugins re-coldplug. + thunderbolt: Detecting new devices and add an actual device to + the daemon. + Add support for flashing the ChaosKey. + thunderbolt: add some guards around empty arrays. + dell: Adjust the coldplug preparation and cleanup sequence. + dell: Fix possible linker problem. + Revert "thunderbolt: add some guards around empty arrays". + Add fu_plugin_set_coldplug_delay() to allow hardware to + initialize if required. + altos: Add error checking when using termios. + ebitdo: Subclass FuDevice like the altos plugin. + altos: Set the flags in the init_real so they work for the + cmdline tool. + unifying: Subclass FuDevice like the altos plugin. + Include all debug messages when run with --verbose. + dell: introduce a standalone (noinst) tool to force mode + flashes. + Introduce plugin for Synaptics MST hubs. + synapticsmst: Add cascade support. + Only register the D-Bus service when all devices have been + added. + synapticsmst: Refactor away the global state. + synapticsmst: fix cascade support in the plugin. + Updates for thunderbolt plugin. + thunderbolt: Add special handling for safe mode on Dell systems + (gh#hughsie/fwupd#84). + synapticsmst: Iterate all nodes rather than hardcoding to 3. + synapticsmst: build GUID using dock type. + Add a new function fu_dell_supported to fu-dell-common. + synapticsmst: add a test suite. + synapticsmst: Fix up some trivial whitespace issues. + Fix a refcounting issue in the udev plugin. - Add rpmlintrc untill security review is resolved- Update to version 0.7.5: + Clean up PO files + Verify devices support updating in mode they are called. + Fix an assert when unlocking the dummy ESRT device + Don't create the UEFI dummy device if the unlock will happen on + next boot + dell: Match on TB16 as well + Fix a -fstack-protector-strong crash when uploading firmware + Enable the stack protection in local builds + dell: If running in test suite, don't try to get product ID + from sysfs + libfdfu: Show a warning when getting the alt-name failed + dfu: Fix listing devices using the ST reference bootloader + Show the nicely formatted target name for DfuSe devices + libdfu: Fix two possible critical warnings for corrupt USB + descriptors + libdfu: Correctly offset addresses when one zone has multiple + sectors + libdfu: Do not do GetStatus on dfuse upload + libdfu: Fix uploading from DfuSe devices + libdfu: Use the device offset when writing DfuSe firmware + libdfu: Add DfuAction enumerated value to represent a device + action + libdfu: Use an animated progress bar when performing DFU + operations + libdfu: Do not do a zero-byte download when in DfuSe mode + libdfu: Fix verification of written DfuSe firmware + libdfu: Ensure the device is open before claiming the interface + libdfu: Ensure the mode is set correctly when faking a runtime + libdfu: Re-get the quirks when the DfuDevice gets a new + GUsbDevice + libdfu: Add quirks for HydraBus as it does not have a DFU + runtime + libdfu: Match the device booloader or runtime VID and PID when + checking firmware + Add a 'replace-data' command to dfu-tool + string + libdfu: Add dfu_sector_get_zone() to get the continuous memory + zone number + libdfu: Wait for DNBUSY to be cleared when checking the DfuSe + status + libdfu: Correctly erase DfuSe devices + Enable hardening flags on more binaries + libdfu: Correctly set the element address when uploading from + DfuSe devices - Add pkgconfig(gmodule-2.0) BuildRequires: Align with what + configure checks for. - Add pkgconfig(libsmbios_c) BuildRequires: Support dell bios. + Unfortunatly, until we have fwup packaged and enabled, this will + not work. - Add disabled pkgconfig(libtbtfwu): For future thunderbolt + support.- Update to version 0.7.4: + Add a fallback for older appstream-glib releases + Write the ELF files with the correct section type + Fix libfwupd self tests when a host-provided fwupd is not + available + Add dfu_firmware_add_symbol() + Add the Altos symbol table to the DfuFirmware + Use the symtab to set the VID/PID from Altos IHEX firmware + images + Show the human-readable version in the 'dfu-tool dump' output + Allow specifying the argument to 'dfu-tool set-release' in + major.minor format. + sections + Support writing the IHEX symbol table + call + Load the symbol table from ELF firmware + Load the Altos USB descriptor from ELF files + Add DFU_CIPHER_KIND_RSA + Fix a possible crash when uploading firmware files using libdfu- Update to version 0.7.3: + build: Fix gtk-doc build when srcdir != builddir + In get-details output, display the blob filename + Ensure the update ID is set when getting local firmware details + Use a private gnupg key store + Add support for installing against multiple devices from a CAB + file + Use the correct firmware blob when installing a composite + device update + in get-details output, display update_name rather than Unknown + Device + statements + Don't make failures critical while checking versions or locked + state + Show a more detailed error when installing firmware on the + wildcard + Add Dell TPM and TB15/WD15 support via new Dell provider. + file + Allow blacklisting devices by their GUID + header file + Add XPS 9250 to Dell TPM modeswitch blacklist + Only display flashes left in results output when it gets low. + Add a small library for talking with 0bitdo hardware + Add another compile warning and fix up any build failures + Embed fwupd version in generated libfwupd and libdfu + documentation + Update fwupdmgr manpage for new commands and arguments + build: Fix gtk-doc build when srcdir != builddir + online not offline + Get the firmware version correctly from 0Bitdo gamepads + Switch to the Amazon S3 CDN for firmware metadata + Fix writing 8Bitdo device firmware + be updated + Show the vendor flashing instructions when installing + Split out the DFU file formats to separate files + Add fwupd_result_remove_device_flag() + Add FU_DEVICE_FLAG_NEEDS_BOOTLOADER + get-updates output + Allow providers to export percentage completion + Add fwupd_client_get_status() + Handle the 8Bitdo bootloader in a better way + Show a progress notification when installing firmware + Add fwupd_result_get_unique_id() + Use the SHA1 hash of the local file data as the component + origin + Use the correct define prefix for FwupdDeviceFlags + libdfu: Fix hang when parsing corrupt IHEX files + Add a set-target-size command to dfu-tool + Support the 'DEVO' cipher kind in libdfu + Add a set-address command to dfu-util + Disable the Dell specific code by default + Conditionally enable all providers based upon what's installed + Add a summary of providers that are enabled from configure + Do not use the deprecated GNOME_COMPILE_WARNINGS + Ignore devices that do not add at least one GUID + Do not attempt to add DFU devices not in runtime mode + Save the unique ID in the pending database + libdfu: Add initial ELF reading and writing support + Add dfu_firmware_format_from_string() + Normalize the DfuFirmwareFormat enums- Update to version 0.7.2: + Allow devices to have multiple assigned GUIDs + Only return updatable devices from GetDevices() + Add fu_device_get_alternate() + Allow metainfo files to match only specific revisions of + devices + Re-read flags for a device after a provider's unlock routine is + done + Test for a locked device when trying to install firmware update + Enforce allowing providers to take away flash abilities + Support returning multiple GUIDs from GetDetails + Add a GetDetailsLocal() method to eventually replace + GetDetails() + break + libdfu: Add DfuVersion enumerated values + libdfu: Show the DFU protocol version in 'dfu-tool list' + Only claim the DFU interface when required- Update to version 0.7.1: + Fix libdfu CRC check for big endian architectures + Add dfu_image_get_element_default() + Fix libdfu CRC check for big endian architectures + Fix big endian issues when reading and writing DFU and DfuSe + files + Remove non-interactive pinentry setting from fu-keyring + Set the system's DMI product name as the DisplayName for UEFI + Re-order output of get-devices to be easier to read + Make the device display name nicer + update version + Return all update descriptions newer than the installed version + Add summary and name field for Rival SteelSeries + Fix a critical warning when restarting the daemon + Add a 'supported' flag to the FuDevice + Add fwupd_client_connect() + Add a 'monitor' debugging command for fwupdmgr + Add device-added, device-removed and device-changed signals + Match the AppStream metadata after a device has been adedd + Re-match devices when the AppStream metadata is updated + Show 'Unknow Device' in fwupdmgr when a device name is not set + Set the device description when parsing local firmware files + Add support for a new device field "Flashes Left". + src/Makefile.am: reshuffle so enableable bits are only + referenced when on + Add support for a --force flag to override provider warnings- Update to version 0.7.0: + Use g_usb_context_wait_for_replug() + Run vendor plugins as required + Add a plugin for SteelSeries hardware + Add fwupd_device_flag_to_string() + Return the device flags when getting firmware details + Show device flags in 'fwupdmgr get-devices' + Add fwupd_trust_flag_to_string() + Export FwupdUpdateState in libfwupd + Export FwupdUpdateFlags in libfwupd + Add FwupdResult to libfwupd + Add a self test framework for libfwupd + Add FwupdClient to libfwupd + Use FwupdClient from libfwupd in fwupdmgr + Use libfwupd inside the daemon + Emit a FwupdClient::changed when the daemon emits this signal + Rename some of the new libfwupd API to align with the D-Bus + names + libdfu: Fix up some NULL/FALSE confusion + libfwup: Fix up some NULL/FALSE confusion + FwupdClient + Allow other checksum kinds in FwupdResult + Allow SHA-256 hashes when verifying + Show the checksum kind in the fwupdmgr output + Add Alienware to the version quirk table + Do not use /tmp for downloaded files + Add fwupd_result_has_device_flag() + Do not return updates that require AC when on battery + Connect to UPower at startup + Test that GPG key import actually was successful (or didn't + change a key already in the keyring) + Use g_auto() in FuKeyring + Return errors of the correct type when using libfwupd + Allow overridding the location of the pending database for + test suite + Allow overriding the location of the provider offline files for + test suite + Validate that the dbus system bus is available before running + libfwupd tests + Update README.md for changes that have happened in the project + Add some basic explanation of how to use fwupd with various + frontends + Split out the libdfu-devel package + Revert "Allow overridding the location of the pending database + for test suite" + Revert "Allow overriding the location of the provider offline + files for test suite" + Allow the test suite to run in %check + Generate gtk-doc documentation for libfwupd- Update to version 0.6.3: + Require AC power before scheduling some types of firmware + update + Install the hardcoded firmware AppStream file + Correct the BCD version number for DFU 1.1 + Add an unlock method for devices + Add ESRT enable method into UEFI provider. + Only read PCI OptionROM firmware when devices are manually + unlocked + Do not use deprecated API from libappstream-glib + Ignore the DFU runtime on the DW1820A + Export the attribute and quirk values in libdfu + Show ignored DFU devices in dfu-util, but not in fwupd + Allow defining update vfuncs with no runtime support + Revert "Allow defining update vfuncs with no runtime support" + Add a simple plugin infrastructure- Update to version 0.6.2: + Add 'Created' and 'Modified' properties on managed devices + Fix get-results for UEFI provider. + Support vendor-specific UEFI version encodings + Move quirks directly into a single table and file.- Update to version 0.6.1: + Only dump the profiling data when run with --verbose + Always persist ColorHug devices after replug + Do not misdetect different ColorHug devices- Update to version 0.6.0: + Add support for updating USB devices with DFU + libdfu: Add support for DfuSe firmware + libdfu: Generate gtk-doc documentation + libdfu: Don't rely on specific hardware to be present + libdfu: Move the VID:PID checks from the tool to DfuDevice + libdfu: Use a custom error domain + Use the same device identification string format as Microsoft + libdfu: Fix crash when setting a target size + libdfu: Allow setting the alternate settings in DfuSe firmware + libdfu: Add a merge command to dfu-tool + libdfu: Allow choosing a different alt-setting when downloading + libdfu: Fix a crash when setting a NULL image name + libdfu: Correctly implement auto-boot in dfu_device_download() + libdfu: Check for extra args to dfu-tool convert + libdfu: Call the progress callback when doing detach + Ignore the DFU device detach:attach when verifying + libdfu: Require a --force flag to flash wildcard firmware + Use new API available in fwup 0.5 + libdfu: Make the element address 32 bits in size + libdfu: Support the ST-specific bitCanAccelerate + libdfu: Only do a Detach notification if we're actually doing to do it + libdfu: Use the progress bar for all uploads and downloads + libdfu: Improve the output of 'dfu-util list' + libdfu: Support download and upload to ST DfuSe devices + libdfu: Fix multi-interface devices like the Neo Freerunner + libdfu: Add a pkgconfig file + libdfu: Use signals to propagate device state + libdfu: Add a context object to handle device hotplug + libdfu: Add an example showing GObject Introspection + libdfu: Do not ref DfuDevice in DfuTarget so the auto-close + logic works + Close DFU devices as soon as possible after the transfer has completed + Emit the changed signal after doing an update + Rescan the DFU device after replug to get the new version + libdfu: Add dfu_context_get_device_by_platform_id() + libdfu: Add dfu_device_get_runtime_release() + libdfu: Add dfu_device_get_display_name() + libdfu: Fix self tests after recent API change + Split out the DFU provider as a new file + libdfu: Copy the platform ID and invalidate the GUsbDevice when removed + libdfu: Accept multiple spaces after the DfuSe sector name + libdfu: Verify the GUsbDevice is set before using it + libdfu: Remove the weak pointer when destroying the DfuTarget + libdfu: Fix dfu_device_wait_for_replug() so it can work with a DfuContext + Export the AppStream ID when returning device results + Rescan the DFU device after firmware has been updated + libdfu: Handle cancellation with ctrl+c in dfu-tool + libdfu: Add a quirk to support DFU runtime-less devices + libdfu: Add an explicit 'attach' method + libdfu: Add dfu_firmware_get_image_by_name() + libdfu: Make reading and writing to targets easier to + understand + Fix compile with --disable-shared + libdfu: Display all the files shown with 'dfu-tool dump' + libdfu: Fix a few crashers found using afl + libdfu: Fix another bug discovered by the fuzzer + libdfu: Add commands to encrypt and decrypt firmware images + libdfu: Show better device errors + libdfu: Add DfuCipher which is a property on a target and a + firmware file + libdfu: Add support for the draft 'DFU Metadata Table + Specification' + libdfu: Only enumerate the DfuContext when required + libdfu: Fix several reported crashes in the inhex32 import code + Release fwupd 0.6.0- Update to version 0.5.4: + Fix compile error against fwupdate git due to dropped + functions. + Use strerror() when printing errors from libfwupdate + Use new API available in fwup 0.5 + Release fwupd 0.5.4- Update to version 0.5.3: + Avoid seeking when reading the file magic during refresh + Do not assume that the compressed XML data will be NUL + terminated + debugging + Use the correct user agent string for fwupdmgr + Release fwupd 0.5.3- Update to version 0.5.2: + Ensure D-Bus remote errors are registered at fwupdmgr startup + Show the dotted-decimal representation of the UEFI version + number + require appstream-glib 0.5.1 + not found + When the version is from the 'FW' extension do not cache the + device + Support cabinet archives files with more than one firmware + Add the update description to the GetDetails results + Add profiling data to debug slow startup times + Fix verify-update to produce components with the correct + provide values + Clear the in-memory firmware store only after parsing a valid + XML file + Release fwupd 0.5.2- Update to version 0.5.1: + Fix the error message when no devices can be updated + offline update: Use glib api for for reading symlinks + Release fwupd 0.5.1- Update to version 0.5.0: + Do not merge the existing firmware metadata with the submitted + files + Raise the dep on GLib to support and use g_autoptr() + Do not reboot if racing with the PackageKit offline update + mechanism + Release fwupd 0.5.0- Update to version 0.1.6: + Install fwupd and fwsignd into /usr/lib/$(triplet)/fwupd + instead. + Use the new secure metadata URI + Update the offline update service to invoke right command + Don't apply firmware if something else is processing the + offline update + Remove fwsignd, we have the LVFS now + Depend on appstream-glib >= 0.5.0 + Add application metadata when getting the updates list + Simplify the version properties on devices to avoid complexity + and bugs + Release fwupd 0.1.6- Update to version 0.1.5: + Allow fwupd to be autostarted by systemd + Sign the test binary with the correct key + Do not pre-convert the update description from AppStream XML + Devices with option ROM are always internal + Prefer the GUID from the firmware than the device + Allow no arguments to 'fwupdmgr verify-update' and use sane + defaults + Add the ability to remove a vendor on the LVFS site + Fix validation of written firmware + Move the verification and metadata matching phase to the daemon + Add a simple config file to store the correct LVFS download URI + Make parsing the option ROM runtime optional + Add a Raspberry Pi firmware provider + Use the AppStream 0.9 firmware specification by default + Generate the ColorHug test files at runtime + Release fwupd 0.1.5- Update to version 0.1.4: + man/Makefile.am: Add --sgml to docbook2man invocation + Make statements about storing private keys stronger. + Provide a way for clients to add new firmware metadata to the + system cache + Fix fwupd-offline-update.service + Revert "man/Makefile.am: Add --sgml to docbook2man invocation" + Add a Udev firmware provider + Extract the version string from the ROM in PCI devices + Add a 'verify' command that verifies the cryptographic hash of + device firmware + Make the ROM parsing more robust and add self tests + Get the version number out from Intel VBIOS too + Provide a way to dump the option ROM using the command line + build: gusb is required even without colorhug + remove unused variables + Do not return NULL as a gboolean + Fix Intel VBIOS detection on Dell hardware + Do not use the subsystem information when constructing the fake + GUID + Actually parse the PCI option ROM + Accept multiple files at one time when using fwupdmgr dump-rom + verify run + Add a 'verify-update' command to fwupdmgr + Fix trivial bug when parsing firmware versions + Keep hitting the hardware until it gives us enough ROM + Make the version parsing more resilient to corrupt firmware + Fix the example .inf file to reflect reality + Fix ROM PPID searching to work for all ROMs + Move the LVFS website to the fwupd project + Add the ability to create detached signatures + Allow cab files to be saved + Add a simple signing server that operates on .cab files + Automatically download metadata using fwupdmgr if required + Don't call efibootmgr after fwupdate. + Associate the contact email address directly with the vendor + key + Use the actual LVFS GPG key + Allow running fwsignd as the non-root user + metadata + Do not merge existing LVFS metadata + Do not use the file hash when storing the LVFS submitted + firmwares + Move GetUpdates to the daemon + Change the DBus method for installing firmware to 'Install' + Allow installing an offline UEFI update without --offline + Add a 'fwupdmgr update' command to update all devices to latest + versions + 'update' command + Increase the size limit of firmware to 50Mb + Only sign files when the entire file has been copied + Fallback to offline install when calling the update argument. + Reload appstream data after refreshing. + Release fwupd 0.1.4- Update to version 0.1.3: + Coldplug the devices before acquiring the well known name + Add an UNKNOWN status so we can return meaningful enum values + Run the offline actions using systemd when required + Get the firmware version from the device descriptors + Added syntax highlighting + More markup + Support OpenHardware devices using the fwupd vendor extensions + Move boolean properties on the device to a set of flags + Release fwupd 0.1.3- Update to version 0.1.2: + More markup + Fixed typos and markup for executable + Add slovak translation + Add helper code to validate public key signatures + Decompress any firmware signatures in the .cab file + Verify firmware if a detached signature is present + Show the firmware trust status when doing GetDetails() + Only allow signed firmware to be upgraded without a password + Add some guidelines for vendors to README + Small grammar fix + Extract the .cat file alongside the firmware + Release fwupd 0.1.2- Update to version fwupd_0_1_1: + Do not crash when there are no devices to return + Add a 'get-updates' command to fwupdmgr + Add and document the offline-update lifecycle + Create runtime directories if they do not exist + Create a libfwupd shared library + Export the status as an enumerated value rather than a string + Release fwupd 0.1.1- Initial package./bin/sh/bin/sh/bin/sh/bin/shs390zp35 1655109494  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~1.5.8-150300.3.5.11.5.8-150300.3.5.11.5.8-150300.3.5.1  !"###$%&'fwupddaemon.confremotes.dlvfs-testing.conflvfs.confvendor-directory.confvendor.confthunderbolt.confupower.confpkifwupdfwupd-metadataGPG-KEY-Linux-Foundation-MetadataGPG-KEY-Linux-Vendor-Firmware-ServiceLVFS-CA.pemGPG-KEY-Linux-Foundation-FirmwareGPG-KEY-Linux-Vendor-Firmware-ServiceLVFS-CA.pemfwupdagentfwupdmgrfwupdtoolfwupdfwupdfwupdofflinefwupd-refresh.presetfwupd.shutdownfwupd-offline-update.servicefwupd-refresh.servicefwupd-refresh.timerfwupd.servicesystem-update.target.wantsfwupd-offline-update.service90-fwupd-devices.rulesfwupd-plugins-3libfu_plugin_acpi_dmar.solibfu_plugin_acpi_facp.solibfu_plugin_altos.solibfu_plugin_ata.solibfu_plugin_bcm57xx.solibfu_plugin_ccgx.solibfu_plugin_colorhug.solibfu_plugin_cpu.solibfu_plugin_cros_ec.solibfu_plugin_dell_dock.solibfu_plugin_dfu.solibfu_plugin_dfu_csr.solibfu_plugin_ebitdo.solibfu_plugin_elantp.solibfu_plugin_emmc.solibfu_plugin_ep963x.solibfu_plugin_fastboot.solibfu_plugin_fresco_pd.solibfu_plugin_goodixmoc.solibfu_plugin_hailuck.solibfu_plugin_iommu.solibfu_plugin_jabra.solibfu_plugin_linux_lockdown.solibfu_plugin_linux_sleep.solibfu_plugin_linux_swap.solibfu_plugin_linux_tainted.solibfu_plugin_logind.solibfu_plugin_logitech_hidpp.solibfu_plugin_nitrokey.solibfu_plugin_optionrom.solibfu_plugin_pci_bcr.solibfu_plugin_pci_mei.solibfu_plugin_pixart_rf.solibfu_plugin_rts54hid.solibfu_plugin_rts54hub.solibfu_plugin_solokey.solibfu_plugin_steelseries.solibfu_plugin_superio.solibfu_plugin_synaptics_cxaudio.solibfu_plugin_synaptics_prometheus.solibfu_plugin_system76_launch.solibfu_plugin_thelio_io.solibfu_plugin_thunderbolt.solibfu_plugin_tpm.solibfu_plugin_tpm_eventlog.solibfu_plugin_upower.solibfu_plugin_vli.solibfu_plugin_wacom_raw.solibfu_plugin_wacom_usb.sorcfwupdrcfwupd-offline-updatercfwupd-refreshfwupdagentfwupdmgrfwupdtoolorg.freedesktop.fwupd.xmlorg.freedesktop.fwupd.serviceorg.freedesktop.fwupd.conffwupdREADME.mdfwupdadd_capsule_header.pyfirmware_packager.pyinstall_dell_bios_exe.pymetainfoorg.freedesktop.fwupd.remotes.lvfs-testing.metainfo.xmlorg.freedesktop.fwupd.remotes.lvfs.metainfo.xmlquirks.daltos.quirkata.quirkbcm57xx.quirkccgx-ids.quirkccgx.quirkcolorhug.quirkcpu.quirkcros-ec.quirkdell-dock.quirkdfu-csr.quirkdfu.quirkebitdo.quirkelantp.quirkemmc.quirkep963x.quirkfastboot.quirkfresco-pd.quirkgoodixmoc.quirkhailuck.quirkiommu.quirkjabra.quirklogitech-hidpp.quirknitrokey.quirkoptionrom.quirkpci-bcr.quirkpci-mei.quirkpixart-rf.quirkrts54hid.quirkrts54hub.quirksolokey.quirksteelseries.quirksuperio.quirksynaptics-cxaudio.quirksynaptics-prometheus.quirksystem76-launch.quirkthelio-io.quirkthunderbolt.quirktpm.quirkvli-pd.quirkvli-usbhub-hyper.quirkvli-usbhub-lenovo.quirkvli-usbhub.quirkwacom-raw.quirkwacom-usb.quirkremotes.dvendorfirmwareREADME.mdsimple_client.pyscalableappsorg.freedesktop.fwupd.svgfwupdCOPYINGfwupdagent.1.gzfwupdmgr.1.gzfwupdtool.1.gzmetainfoorg.freedesktop.fwupd.metainfo.xmlorg.freedesktop.fwupd.policyfwupd/etc//etc/fwupd//etc/fwupd/remotes.d//etc/pki//etc/pki/fwupd-metadata//etc/pki/fwupd//usr/bin//usr/lib//usr/lib/fwupd//usr/lib/systemd/system-preset//usr/lib/systemd/system-shutdown//usr/lib/systemd/system//usr/lib/systemd/system/system-update.target.wants//usr/lib/udev/rules.d//usr/lib64//usr/lib64/fwupd-plugins-3//usr/sbin//usr/share/bash-completion/completions//usr/share/dbus-1/interfaces//usr/share/dbus-1/system-services//usr/share/dbus-1/system.d//usr/share/doc/packages//usr/share/doc/packages/fwupd//usr/share//usr/share/fwupd//usr/share/fwupd/metainfo//usr/share/fwupd/quirks.d//usr/share/fwupd/remotes.d//usr/share/fwupd/remotes.d/vendor//usr/share/fwupd/remotes.d/vendor/firmware//usr/share/icons/hicolor//usr/share/icons/hicolor/scalable//usr/share/icons/hicolor/scalable/apps//usr/share/licenses//usr/share/licenses/fwupd//usr/share/man/man1//usr/share//usr/share/metainfo//usr/share/polkit-1/actions//var/lib/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.suse.de/SUSE:Maintenance:24641/SUSE_SLE-15-SP3_Update/0e9319e520ef939ad798c08e5b308527-fwupd.SUSE_SLE-15-SP3_Updatedrpmxz5s390x-suse-linux  !"#$%&'()*+,-./0123456789:;<<<==<>???@@directoryASCII textELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=881b0e75bac5859c8a966accc505e770590254ca, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=e620e7a0e2b2a39257c1ea2d502007e66f6bbe6f, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=f7f0e0faf10c15cdc1d72c6781be6720aa4b8aa4, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=65bf52bbb9cb95ec226923035f653cd417e4910a, for GNU/Linux 3.2.0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=10e27bfd5ad4982562b1b402505bacc38fa26245, for GNU/Linux 3.2.0, strippedPOSIX shell script, ASCII text executableELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=95157853a8a7ddc8c3175be770db7530b18dee2b, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=923cf1ad5a77a0bf1226f8dd32bf59cf4c11ec2c, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=d79b34fbc46054a29cbb5b1434dd06996d061050, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=a51d25fca0d89cbc4a37763655667fd0894e8248, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=cb231c8b245c58c181610f83d7d00ece3b7b2ec4, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=abb31dca4310da2ac2815b96c680e01af47af498, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=14e7b8c4c36d82ae875e19ce170979093f678313, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=330688b8f9e8d653c11574ad7df62f2b58808d08, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=b47adc9d72afcbbc79f419f2ee053faee03fea3e, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=c8c479c058f2f161dd9be8a1753c0fac6cb49061, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=ca0efe8252b1b484c33c3e955e8925903ad4728b, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=bf60791cdb7261ea55ba9a196dc3658cdc449262, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=1c5fb47582695aff818b2e78a38749ecf4beb10f, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=8622bfda4c88e0e2c64eee5938190234131ab6fb, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=c482062e0793584fecb83309c741e7ff5d3546d0, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=b3afee48c03d15699fdf95cadfbc647b34749d30, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=4b107d1a31ac847a308ecde0f0e5aa835ab810b6, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=26ecf7d60fc1ef6067a3e12c30b0898f5eb8aac9, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=c4609668706354a7ce85ccfa62d0468936948e27, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=ed2132937a400d5cc23b736dddea3903eadbafa8, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=485494b15c3611842b0fe72a218c9bfee8f39dfe, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=8ea47d8a07c503f349bd3cca2603dbd720136d3f, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=f508c584c6092b19de9bb6a557ada066523c36be, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=a8d8fe69d94948899753b7383a37fef29a7fa2ea, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=c5bb31041cf6514cdacc85dabfddcca43351f328, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=7ddba019851f05cb48016505ce64954d1d6778d9, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=5671a43f29908e8847cac8b628ade6974dff60b6, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=826f1e6e1c4426178c0053164574839c010ff155, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=765c04c7f75fd3a06db02114fdff83a98e30ddb4, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=b09492e63ef9291a4c9cf0cdd37cd466a5ab4024, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=ea59c09e6e06151a74bbeaa52db32cfef88812bb, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=33c2934ad1ab7283c979b037e1f19a5654101573, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=77ef7f9bfeafa3239ce8249470f81ecd09e96e8d, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=da5467b74d99c46094de5b0f4bc8f1ed8f96bf40, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=38b8c373388f155ebe21afc73b8c1cf3769be191, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=32963277b5228e30f47657892aa17eba407b7413, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=4e5b8c1c53ecce7af5e04d0924e3f5fa6c8d5bda, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=120c02e6ba01b532a51e3291c96eb9119f80fb92, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=b7ff222bc7358710b8db7faeae7baec412a9e156, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=f77e31367a956b3dc893264afe8362c1d600f8fd, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=232758ff77212f94c4335d3ebd3d79c7f00dfb9a, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=b562233cb3ba7953c3a8957a1e215721c101c81c, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=52582c8fed0ecbeb51cf3e1432d54a054b32e0a6, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=fd7c685d08f5e0d267a3f18f6bd952c794290c05, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=7d81de1c415950f59d0b90fc8ef40ca095f42297, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=95e8da711e4d78ba4f7b87f9f15fd25d3c912545, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=8119ce646228d78d07b51e3a62cd810002e538c3, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=ebdf30eaa358abd4c23b5c17735c3555bd36496e, strippedELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=97df69c8f59134a4e16f8c68d02d2f3d22e81845, strippedexported SGML document, ASCII textXML 1.0 document, ASCII textPython script, ASCII text executableXML 1.0 document, UTF-8 Unicode text, with very long linesSVG Scalable Vector Graphics imagetroff or preprocessor input, ASCII text (gzip compressed data, max compression, from Unix)XML 1.0 document, UTF-8 Unicode text,rC{|(D`'BZz +:Gj4Ei6Eq,Fle8#$&"&'# #  #$!&, $RQRTRiRMRYR RR RRRR"R#R)RR4RR2R8R.R-R(R1RR$RRR'R6R&RRRRRR;RlRnRmR{R RR}RR~R RR R>RBRJRTRQRiR?RMRYR_RWRCRR=RKRPRBRSRYRHRIR?RNRhRRRiRARTRXR_RaRWRLRZRkRGR\R`RfRCRVRR=RKRPRBRSRYRHRIRAR?RNRhRRRiRTRXR_RaRWRLRZRkRGR\R`RCRVRRQRJRTRiR?RMRYRCR_RWRRZRWRHRXRRR]R?R`RiRQRURSRTRRURHRTRERXRFRCR?R`R@RQRdRRURGRkRaRWRVRHRXRFRORMRERQR@R`R_RTRRURZRiRTRWRHRXR`RQRRGRiRHRXRQR`RSRTRRGRWRiRHRQRXRZR`RTRdRRURGRZRdRWRXRMRiR[RfR`RQRVRHRRURGRkRZRiRWRHRXRERQR`RMRSRTRRGRWRRRQR`RTRiRHRSRZRXRRURkRWRHRXRFRMR^R`RERiR@RPRQRVRSRTRRURGRZRHRWRMR`RdRQRTRXRRURGRZRWRHRERFRXR`RdRRRhRQRCR_RTRbRRUR@RdRWR]R`RQRRURdRERXRZRSRQR@RMRTRRURGRkRaRWRZRORMR`RERPR[RYRRRQRVRHRSRTRdRiRXRRURkRWRHRQR`RiRRRSRTRZRXRRURGRWRVRMRERiRYRQR`RHRSRTRZRXR#smRԷ-;k@NQ<-;%hkHld)ۼxeY3s ʑ98BT͆cš, rhA{mh%ҿCezȗ-T`+l I[,-- R(:!#dR58=tB nI<`QI}A&.dːƐ2f\6"O%Yr:qxפejeJROw,_ !oL!OE}fU)bǷ5 L6hy2yɁBQ%:[ a7̓\?m:~+)wF*0NM-{XS!@%䝷H1[I;[·d(]4Diږ7!rW[~ R4 )\gՖF٤$e/"w|L?||ݯ X?iGͫ)D:y}Deɼ ߟS]BxU0@y[Yfb[P:{2D5}"$ږ{-4a\xC&!&zeu֒^?J)~.(w*O5Rʼnzp[;,<*C13ajc^^gcS*?J6F[4uR&{v5ÀɅT8l4};N}C-d3^;AP $_g 7(08'eVHDK^ ;725 NVM"MvG'xᦂցE_dIk;'bL0Lg<)ndKoJ8 [ H\͵E9Iԣ<]pCR5l5ۖTW1k\vM`d$0; +g3gjriu`>D1ZlH3[rV2:[ ,P(uB<f kI;`&;O:3bh\Biw 1MP oiǨyƅfY5o}L{T4ao w'ggJ?W){eo:W(F{Z)UZw{Rnۜ[=HmHҝ. h@=Qq.c(`QC`A`PL zۤT*]vCIɒ!G{S9c%VoC`mB%c*?6' Xtu>YwW:f6I(bR>}={ YJɅ%<ʓ? 30 ¯ EW{ΔXeM\lk.D43R6?rzD갚ULne1зVrHW!b!3夑-NA GBx!ay:'yx 8u3ПtFjP0Jhd`ht[wVkᰘXS6uK`GaK5 gfG".N] iFKR 4Tz[&߫wi_zG^ujL٠3wJgL#|;Q%TM\C~y pqCb)N 0(G MGs>٪ Fe gyA X8Bevhm"[!7ZϙaW*m~f&l rtX_ 8A,vu\/([UHh1b Fim"۰R @nr''W)*Re ? s9U9:|U-$eҺo[DX.=o zP@lӎPoLIL\ vA׼0a>+UM2z3"T/xU1쯣Dz1k[xPa9'ܪd)\×Y#XW;&^l9ă:CdV~aOŗCJ5>RzC=<ʏ`xU,#;`(nӚlIϓ߂&uҺ[Tխ-l(@}ReOd|k>U<5s6 Y/녟r0pHj̅p%-. Zڸ_aAi2*"|&}W%Iĥ3X1!Ʀ_5N̾TQ⿉ jb!ȟ )_dvпJ#,#-;y}|{BGiV~-Dfr0Vk+'wr4$i)Q(v˯,. +}&Q|db8.kEۜ $Y-jzAb!: sIdG _&LMaȚuƒfْ,QFZÔ*3ZXd~c3'Ita8I &zeXR NFW+r#ksaq.p 6>ɟ_ĩF(o9戡?yAWC` &+ ! )܀m")`BW;ʢ ۍ9RЂQB5p񍞂dK&j,ׁsh N3";3\/7;1~e?EH}گ#u`ڗLݥ(|)t<|\޲Søq iƆ̈́KEo-0"@ɫ'Ȅ0HV!;KXZ4o]MSKZ !hF# vmm8T,WŠ/!Gfk"jvC$'߽W {hؼppɍR}w~m&-3\xE+Rb(gLs᠃(|ƓSy(5?s2v}O@YpҶӽ|k>櫙 wA(CO.! M0:[D]mQdsZ|?Kb},|@ꍢsc w(s%sIUI ٻV}rwc_ĨݨR*-~0~NX䕪R&ҏ(a ~i#<\N!RXi}V_8\JTdAb,s?KuxE*tP5oP ]vV !p"75AqTynj?IĻʀ֘7[߻(qkJٹ-.a>Fw8 C;)5Q'g"f=4e47$$\eXd\`zn?Ì?!qfxr(3AX|xL~`72[)6dV%ΓY)BB,Zix141 WO!{إO72 ) f=A*N5^#[ zʪm`Dο@>XQTNAECڲ:E/dX.ՠ4bt.$Zמ7{H ձX)_msi}uuHF,o<_">(r7V Dӡ;WK2S+KRLF!_wu:)M>ӄ;oj[}'=R1blV\'^ʙ&6C'Ԩ>}ޖwuٯ@W .C,-:`Kگ(XbpSWD6.܊Qgb9DkHŦu}K?ҵi'){Z{iE2xH`.TQGB+T6pMy(M(U2N7F:D$Z7Ѳ:ɔHj6xқx-Or 8ɥ2D}xzNu$gBI3 8a5]:TPB;`љz@J)~qR4b|eqD@v$6/\vε. 9TQ[B`&uTl7>ٚO߽RAcvfϑ}&NΏ. >f2ZXf:KΗ-kF` xhrI:f$?/麱ߜ4.-o'۽]oCIhm#,ĝ!#}'Ҙ' >%]ь %ޭ}C;{X*xYAag9 t`knmFQe8YBRx w+R-'IA-Rx֍\PN!6tT>ovNk[ Y1(uEF4,?Y'6q%T}M.kWRaz2e24  ^xy9kajT;j /.U/nU8;F~( {3@кHLnHme%p9*癎'(7?G#z$d8`R#/73c({~D/QtK^%Z7ˑ#gB˻T@H[z<GIM:1{:&nVS|]kƞ\Iٝ[[q]Uį#phn9pOn< `escV(J )( z捑ӶO)+5yrhSaF=ƩhuKu6 p8GNEZQHG[j'ǰqeWՔSe9{u9sT^ Sȳ{'7KAi^ULZ:Mtt^m!8"@-jC)yL%VN¦΋E3WH3+ſ9l[ s^E$5 1Lba%l|JzpN* )#gtSS[nVh`Czncd쾧P,EXɪy/B9DA@1ۦh~}#auJRʟlyJjv¹ q\~?ԍ1@l-Їż8׌ (K͝٧TҤqX~xh*=m;~Fv0xCG t^ rط[BÜg\^Փ BjoFȨ°l<$q'|rŜF|f 1,EV<+ TWVDo!l嬤eHTtXof`]ƺg *j&&+?|JYu#1|戜T7N4ԫ.~t5JQ+v_#飁 [X5~lK]^V$z@LhR/_qsr*4lkeаUJ MU忽^*oӫ}*y>vXET-pȞ?o), c?➵O`y3Pg5\!M7^Qћ7݈!`4$ʹ)ty{6_ĤdeтђK9S%Ldzڧ֣?"f7FpA*(q3~Di&oPY(H߁ htj}$ i4^87K5y7hTF+]>GΡ"nAȲp:o^HМkl$uHN`F!ur" OmD(j.;w/uFjXtec<ۺ;<-KU40 -hH}UNI~^\NJE/@U>InFJjVt._!KkDl,.LWy1k37uӶ/zĆqf#fwQmϞ.=F[]Ta7ܐG2`RsH($B3 DH`gi]R[3?+&;UپXPE԰!(?kAF{䚖fܰa׻F'#pz!'}[bM|"mNr,~*JGq>{ǁ'frOEYt^wo&KWb?7m.l]ZhsO0$0^a'ZD r9^"EP74*) yvFjMۭ' />svtJٚeSGe0o*{b#;d6% LW8\ںy/K?j O?'!6هC 8RsqѿzC7n7A7Cvq'S `vM žV@T*f<]c~ 5a%&-XuC.!39 ;:AOgST"# m(\`Hcwև#75Yĉ>Ocܱ<G*K[zycg*7 !  ,?)?`bV:EV'8^\6.i<Lb.f>J2j$VӨ|UjpU:%@mSVu<9=\;ݔ뾮﮶`ech58|Ӥܽy6BmA3`žz{|Tv5u1Edzq\jG[4F!;yt+eJG jfnZ}z;$f@ɑwJKk؟VS|zTJ2RGനoƥ"n|mc>l5h؞_4ub`:2zz{" 0 @ J0"P};fC;sx9Vhրq,HPٜxA$iyOݟ~"Ғ::.:abM+Ѻ ;vcWhW1=P_ʦeJ-e*M_[ihs\+#ʍNsaJGJF Y_zКlè< b[9m+ ױ!=BPwQtO$n6.IρoX(m1+Wu^;] 1E{E]MrsK拸rXGnzpi*=VxsX#f1e?l=(6ĴuZU-a*}YQcZ+uf_zVnc8j#q0 AB2scq4={/"pvIh^M>?J)4, _^pSmgϔ~c0.t kZh-RluJP[heWyBj)sc]0TQ{db'4Ke#s zƾgs,6z&&_ ;*2٠/MO`f/%m\xHedfwx1њr]J܌U s~ާ:hg Ԙ$׿WӔ B jok?p:dљ# ^0[,I{Z90\ꮏɾj/z!?>c@g!Ȗ*2UAB"C6q( ̈́}-UAm*4iFjTVy,:\AgR?IĪihm]o Yi0?@:\aX-{F8UߩT>$o]4OGic&K~&Nikz&@?ͤ#]Uy ]*[Gy3,HrEl!HlŲ`[.6<пJIu;YZ/uE a;[;hsz1$a ΫKRO5VG[Zm?|@ݨb:\l#GwtC;ܮ]мS q8>3j'kiEvO]G %?pԶCv좇2Z!I xR果oVu9H/#-T47{kPjk׿+;ʓղ\vQXQx YaQs/. 'Σn.a/v|-ڿU;  ?&CT8*A{GW*N+Xf!)Q `j*\絪S(2 Ai*&5MFLgi~Jz(^۠1ks*IWY]5'"/>+H{~K}U 1^ yi2k0q]sCg- &48R {[@L<1q3іFMk!>F#yB3H+OimB8 *ߌ[$\qHk> $z/wj$!a`t6?5GR9IʂHPpYo4oa4\ ԰-e!<%OpvѵjγنIFoyME^9d㺥"VHHZj3' Sˣr@.#.A`rPEy3,gnX^}-<\8 "Rـ؊O-b[K|V5\P`=t@;G~jxS?--?f%KY0M˄$N-l8 j7Y3# e(p%ٿ>XyǞ3PuGׇK]YCxSe 3Յ4$bR?\[P:R>X"1M i{W̧;j GOs q.,;Mt*I?_? tĕˮæH`=OP(z3A)A;p0 Ms)[x0Q f:C#&Z8c̾R?ɧk#8gXlYZ_pӵKPSYǯ=䔴Cp8yw"^2I.' ʫNڧԝL܌!;[2"I۱Pq/![y~Qh{Y(F%^+1^!s@[)ujPd('b7#аyܴmz嚯 zX-λ Bω _ńMugD#sTJ!%>ʨBI|v]wz,-`oL]a_Uo6}+ö[aonw{0owѲؔxuG,>FQwQ<Ng',0 +Qv> (<d}~xƺ\ hr[f$u? 1 :Nn8Y+!FhM]SE>V!&`s%>Zԍ%)0<N> YvUlH:Q@{b[ 1]+m~6YI7Wf-tܢ@aS YŒ&Oi]_a_hr-hl4Lj8*nI#տVq\"W'3~GΆۓ*We(BAߢ4o}G"+kM^n49,'H Ni5ި.jjw-4#:6iZ"@9`#<*ms |[7s_( έ|4a!"S7.XDF/+fO2pMyRBX9;=FBWG{s"#dgc𸳔kZdv ;k_{Pʩ;^픪,hAњ tb.:zb ge ΝG<68{$c- ךpx&@QSodeT@` )H_^;XdG,8.I]n@>Ct:h"˛)# k1„֔pS1tZ΀&]ǭ>sQ&t*y.mdy}dhSXHIO?1ہ׶b=0ґf(Gz޾5R3$/|V}E$eQY\*KZcmo> y%w-x툛d:7ذ/[ ?Y5-lrtx[pץϐq9C[yΫ΄O6.gw9ŀ6߃g\yr s9v.I\"f4;r!_ItT=`c:gB0dR;:(ۊ뉺a_4 DV4orA*L }"cJ-Cˉ=0<Fq\eɃhnqhd+l IDm L-Bm4=dwc aU8+ 0wz w#禊\ЪfC֝zH VB c&Y;ޛaM*cc\Ih1p&+4 {^E-H?xcd^ytSW;vQ4>1o-lZqC9'C ^S/CҊP$tb6]2C|\6JwJ`bq G(ʪ e;Jg5b:sڠ0dH TtӍ~SCp,Bc9Qc_ՏV@wV-./\SɎEWB9[d)CG)'&eIMSldsy}C=8迷b6QCN0I~/)j7rDl$ƨwDlU@Bdt;bTJ7_8oɮD^{m`v }oz%1 іvZ4%u=:4w$5Y.8TFN7 a;A]T _dQ: )$-m~1n~oE"_+|.f]g]Z MBZ|1 [/ 75Z/ +WVy0;Ho&i~1wVc'W;7`}J`Ez»?GpXM&2gt8gl ~L1d5pAԮD(ITGl(ژu7ym_<7r5E0(U7с6DM[K6!W}L\`<_Okj?ߝe?e-Ȝ{!\3UJ'+M y?y DڸM ;S0S[x):e)DʜSkQ(`Yz8Hg;Od"KR V=O0 2@`|+ ''"57l¨Slƅ\Y?0xJk00jǯ0j.?~p w!'[4W@La U)Щ>vTNMm:ʤ$#ViµYQOZ*7}Opuf~wx߮{.#c7tC4{j0 zR22>|ڀk~UzA&A~4qBk=R'/q 2[Z簹Rxx+k=k_YobʋHhԲUz7Zo2TP z: =IZڅl"[I5CMvzb>Ұg߶6 ~ڐXym>SHF0jꃪ= +%6c\w+j!&3פDzP4IprUGi/S4r+l*Nc3bxZ?'B%m-0,&>:QH>3 HL}R!h-&;İtJZKKiH0辖ok5cDA.KP:L'ʚk4(jN[Y;w- &g&JŇ;Lrℶ陌ON)9L^"ϣ_Hw =uyioE$PLJiVַ/P+luy#ZRzE%ޞbo9KR/K1v{TM|K>]2q\ e&) ̖.ōP6B[#l09bĊM >:dQ8nBtOxVK0g#[4jNu;91TN ,cL)zŘ/9?}׀7ځwYK.aPZ/=Œ|R8*mS=gGuY#ʀA\N^E\¼ ]n{^ŒiU;7g3?A8JX^^Q=:c+\L CNݘE2$-> x{q;@4pm P!$E0z#q֯jh+BJy/U(2}p4 {F<Ŏ`*ͳ_:qGugO=0P͕'Z]'\x]O '+ZUO\[UzR!?(/.N کORh<Ȏ6q.X+kuN6~mHt 3W3n7U*rC2NmD1͖u,@ᄣ4`Dx,UڮvAFګ_x>Db^r-yg\1pZBXJ ӷpi YZ