binutils-gold-2.39-150100.7.40.1<>,Xccp9|Ln[.2qcl7~^pԗ(ͳNOl| Q/j@Նp4v=#^QwD FT{Á5:2qQÒHciC)c&Hd۫Q󘈫W(3}d=ح$aɭ7pvrp9ECҸ-H"V.zTO> .ʞ5 ^B]kME b6 N,]:%þ l[K$꿊lRd>B|?ld # 3!BS i h   (  `8 ( 58 <9x:{>4?<FDG\HIXY \4]t^bc_defluv@w4xtyz  &hCbinutils-gold2.39150100.7.40.1The gold linkergold is an ELF linker. It is intended to have complete support for ELF and to run as fast as possible on modern systems. For normal use it is a drop-in replacement for the older GNU linker.ccmourvedreitSUSE Linux Enterprise 15SUSE LLC GPL-3.0-or-laterhttps://www.suse.com/Development/Tools/Buildinghttps://www.gnu.org/software/binutils/linuxppc64le"/usr/sbin/update-alternatives" --install \ "/usr/bin/ld" ld "/usr/bin/ld.gold" 1if [ "$1" = 0 ]; then "/usr/sbin/update-alternatives" --remove ld "/usr/bin/ld.gold"; fi;^p KO>8S'#3A큤ccIcchccbbccTccTccTccTccTccTccTccTccUccUccUf4916fae0c683576c75751de8df10d3f889d60df5bf93b60f403ef1e84c1f6e79c7d9e88051614c76ebc700ba27c5fbf146c06bdae465534b2472c04ef3b207506baa4661f0bbf043324bc0ed9ebe52c93d4c4294d6f1f65bcfb1204250f277067965150c38709d69eeea4f50747651113993188e18f39e332a89bbb5848cbeb0a45e705808d463f9a166fbe3f22d3da36c72226eb71c4997b443c04a1a2200d66e204bdbf9de7757ad401d6e213d8ac44f994747cc86fdaa15e67193bb7806dc23670d6262ee7db3c3a55f56d91f87c7ab7bef4b486ee5eb276bbb43eae84afe362b0f525efec8c8c2177aaaad55a36f48d5d002d5831522399e8db593b05aa5be2894a2fc224908c87e5af5e2943e437107e35866a95eb69c8e4055588b9cab7f2a8727689bccf2f7516c0a45da11aef7ddc21e811ae91ab10f090231a04fb8cdb59dd5f3cfe1e21a3186c6a016df2036e6fa53b4511b18f2bdcd17d7c1f6834f1a71e916ca3feccd8daa696505a71ddb72b5c3d9833933f685087ece50f1c7afc2184744767304788648b36856863cb194f7d2708abfb304e406ffb397b36f25baedbbee0c330647b7b83f7f0b73c2b6ce11e94ec043158256dbe1155cb93ld.goldrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootbinutils-2.39-150100.7.40.1.src.rpmbinutils-goldbinutils-gold(ppc-64) @@@@@@@@@@@@@@@@@@@@@@    /bin/sh/bin/shbinutilslibc.so.6()(64bit)libc.so.6(GLIBC_2.17)(64bit)libdl.so.2()(64bit)libdl.so.2(GLIBC_2.17)(64bit)libgcc_s.so.1()(64bit)libgcc_s.so.1(GCC_3.0)(64bit)libgcc_s.so.1(GCC_3.4.4)(64bit)libgcc_s.so.1(GCC_4.2.0)(64bit)libpthread.so.0()(64bit)libpthread.so.0(GLIBC_2.17)(64bit)libstdc++.so.6()(64bit)libstdc++.so.6(CXXABI_1.3)(64bit)libstdc++.so.6(CXXABI_1.3.5)(64bit)libstdc++.so.6(CXXABI_1.3.8)(64bit)libstdc++.so.6(CXXABI_1.3.9)(64bit)libstdc++.so.6(GLIBCXX_3.4)(64bit)libstdc++.so.6(GLIBCXX_3.4.11)(64bit)libstdc++.so.6(GLIBCXX_3.4.15)(64bit)libstdc++.so.6(GLIBCXX_3.4.18)(64bit)libstdc++.so.6(GLIBCXX_3.4.20)(64bit)libstdc++.so.6(GLIBCXX_3.4.21)(64bit)libz.so.1()(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)update-alternatives2.39-150100.7.40.13.0.4-14.6.0-14.0-15.2-14.14.1cWcWcMCcbbbWb&b@b@by@bu brjbrjbrjbobf@bT@bT@b8hb)@b!@b bs@bs@b!b@b@a@a@aW@aaya(@aa`2a;Ha8a /`]`]`+`]`?z@`<@``@`>` a@_$_@_E@_h_`_7@_-B@_@^{G^Y^V]^K^K^5h@^r]*]҇]@]]@]v>]ja@]5@\ \@\@\@\k\Yz\X)@\I\ @[1[9@[`O@[L[)Z@ZlZZZ%ZZZk@Ze@Z_:Y*@Y5Y@YY@YJYYx@Yx@X@XDX@XX@XO@X @XXe@XVz@X>@X<@WW@W|VV@V2VHV@V<@VCV @U4@U@UUb@U@Ux&UY@UY@UW1@T@TTT@T|X@TSymatz@suse.comschwab@suse.dematz@suse.commatz@suse.commliska@suse.czmliska@suse.czmliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czschwab@suse.dematz@suse.commliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmatz@suse.commatz@suse.commatz@suse.commeissner@suse.comwbauer@tmo.atmliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czmatwey.kornilov@gmail.comdmueller@suse.commliska@suse.czmatz@suse.commliska@suse.czmatz@suse.commliska@suse.czmatz@suse.comStefan Schubert schubi@suse.dematz@suse.commliska@suse.czmliska@suse.czmliska@suse.czschwab@suse.demliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmatz@suse.commatz@suse.comstefan.bruens@rwth-aachen.demliska@suse.czmatz@suse.commliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czmliska@suse.czrguenther@suse.commliska@suse.czmliska@suse.czmliska@suse.czschwab@suse.dematz@suse.commatz@suse.commliska@suse.czmatz@suse.commatz@suse.commatz@suse.comdmueller@suse.commliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czschwab@suse.demliska@suse.czmliska@suse.czmliska@suse.czmatz@suse.commatz@suse.commliska@suse.czmatz@suse.comrguenther@suse.comrguenther@suse.comschwab@suse.deafaerber@suse.dematz@suse.comschwab@suse.derguenther@suse.comschwab@suse.dematz@suse.comschwab@suse.dedimstar@opensuse.orgschwab@suse.deafaerber@suse.dematz@suse.commliska@suse.czrguenther@suse.commatz@suse.commatz@suse.commatz@suse.commatz@suse.comrguenther@suse.comrguenther@suse.comafaerber@suse.derguenther@suse.comrguenther@suse.commatz@suse.comrguenther@suse.comschwab@linux-m68k.orgrguenther@suse.comrguenther@suse.comafaerber@suse.dejengelh@inai.deidonmez@suse.comrguenther@suse.comstefan.bruens@rwth-aachen.derguenther@suse.comrguenther@suse.comrguenther@suse.comrguenther@suse.comrguenther@suse.comrguenther@suse.comrguenther@suse.comschwab@suse.deschwab@suse.deschwab@suse.dematz@suse.deafaerber@suse.deschwab@linux-m68k.orgmatz@suse.deafaerber@suse.dedmueller@suse.commatz@suse.demeissner@suse.comhrvoje.senjan@gmail.comschwab@suse.deschwab@suse.derguenther@suse.comdimstar@opensuse.orgmatz@suse.deafaerber@suse.de- Add binutils-maxpagesize.diff for a problem on old code streams, where we would generate too large binaries.- s390-pic-dso.diff: use %pB instead of %B- SLE toolchain update of binutils. Update to 2.39 from 2.37, which means obsoleting and hence removing these patches: binutils-add-efi-aarch64-1.diff, binutils-add-efi-aarch64-2.diff, binutils-add-efi-aarch64-3.diff, binutils-fix-keepdebug.diff, binutils-add-z16-name.diff. Implements [jsc#SLE-25046, jsc#PED-2029, jsc#PED-2035, jsc#PED-2033, jsc#PED-2030, jsc#PED-2038, jsc#PED-2032, jsc#PED-2034, jsc#PED-2031, jsc#SLE-25047] - This fixes these CVEs relative to 2.37: [bsc#1188374, bsc#1185597] aka (GCC) PR99935 aka CVE-2021-3648 [bsc#1193929] aka PR28694 aka CVE-2021-45078 [bsc#1194783] aka (GCC) PR98886 aka CVE-2021-46195 [bsc#1197592] aka (GCC) PR105039 aka CVE-2022-27943 [bsc#1202966] aka PR29289 aka CVE-2022-38126 [bsc#1202967] aka PR29290 aka CVE-2022-38127 [bsc#1202969] aka CVE-2021-3826- Add binutils-pr29482.diff for PR29482, aka CVE-2022-38533 [bsc#1202816]- Rebase binutils-2.39-branch.diff.gz that contains fix for PR29451.- Add binutils-2.39-branch.diff.gz. - Explicitly enable --enable-warn-execstack=yes and --enable-warn-rwx-segments=yes. - Add gprofng subpackage.- Update to binutils 2.39: * The ELF linker will now generate a warning message if the stack is made executable. Similarly it will warn if the output binary contains a segment with all three of the read, write and execute permission bits set. These warnings are intended to help developers identify programs which might be vulnerable to attack via these executable memory regions. The warnings are enabled by default but can be disabled via a command line option. It is also possible to build a linker with the warnings disabled, should that be necessary. * The ELF linker now supports a --package-metadata option that allows embedding a JSON payload in accordance to the Package Metadata specification. * In linker scripts it is now possible to use TYPE= in an output section description to set the section type value. * The objdump program now supports coloured/colored syntax highlighting of its disassembler output for some architectures. (Currently: AVR, RiscV, s390, x86, x86_64). * The nm program now supports a --no-weak/-W option to make it ignore weak symbols. * The readelf and objdump programs now support a -wE option to prevent them from attempting to access debuginfod servers when following links. * The objcopy program's --weaken, --weaken-symbol, and - -weaken-symbols options now works with unique symbols as well. - Rebase binutils-compat-old-behaviour.diff, binutils-revert-hlasm-insns.diff, binutils-revert-plt32-in-branches.diff and remove binutils-2.38-branch.diff.gz. - For now use --disable-gprofng. - Includes fixes for these CVEs: bnc#1142579 aka CVE-2019-1010204 aka PR23765(Fake entry from SLE for tracking purposes:) - For building shim 15.6~rc1 (and later versions) aarch64 image, objcopy needs to support efi-app-aarch64 target. (bsc#1198458) Adds binutils-add-efi-aarch64-1.diff, binutils-add-efi-aarch64-2.diff, binutils-add-efi-aarch64-3.diff .- Use https for variosu links.- Update binutils-2.38-branch.diff.gz (to 93054037f1e304e) in order to include PR29087.- Enable multitarget build on riscv64 - On SLE15 and later, use make -Oline to synchronize configure output by lines(Fake entry from SLE for tracking purposes:) - Add binutils-fix-keepdebug.diff for fix bsc#1191908, a problem in crash not accepting some of our .ko.debug files.- Renumber Sources.- Fix ExcludeArch for ppc.- Make multibuild utilize only the main binutils.spec file. - Remove not needed README.First-for.SUSE.packagers, pre_checkin.sh.- Start using _multibuild for cross binutils.- Add binutils-revert-rela.diff to revert back to old behaviour of not ignoring the in-section content of to be relocated fields on x86-64, even though that's a RELA architecture. Compatibility with buggy object files generated by old tools. [bsc#1198422] (forward port from SLE)- Update binutils-2.38-branch.diff.gz (to c210342d7f5) to include recognition of 'z16' name for 'arch14' on s390. [bsc#1198237](Fake entry from SLE for tracking purposes:) - Add binutils-add-z16-name.diff so that the now official name z16 for arch14 is recognized. [bsc#1198237]- Add usage of a SUSE_ZNOW environment variable which allows switching on "-z now" by default using "export SUSE_ZNOW=1", similar to the SUSE_ASNEEDED variable. Adds binutils-znow.patch.- Update binutils-skip-rpaths.patch: add back fix for boo#1191473, which got lost in the update to 2.38.- Update binutils-2.38-branch.diff.gz in order to include PR28879.- From Stefan Brüns : * Install symlinks for all target specific tools on arm-eabi-none [bsc#1185712]- Do not re-generate ld/ldlex.c, ld/ldgram.c, ld/ldgram.h and verify that corresponding flex/bison files are not modified by a patch.- Use verbose mode for make for cross compilers.- Make it build on SLE-11 again.- Use verbose mode for make.- Update to binutils 2.38: * elfedit: Add --output-abiversion option to update ABIVERSION. * Add support for the LoongArch instruction set. * Tools which display symbols or strings (readelf, strings, nm, objdump) have a new command line option which controls how unicode characters are handled. By default they are treated as normal for the tool. Using - -unicode=locale will display them according to the current locale. Using --unicode=hex will display them as hex byte values, whilst - -unicode=escape will display them as escape sequences. In addition using --unicode=highlight will display them as unicode escape sequences highlighted in red (if supported by the output device). * readelf -r dumps RELR relative relocations now. * Support for efi-app-aarch64, efi-rtdrv-aarch64 and efi-bsdrv-aarch64 has been added to objcopy in order to enable UEFI development using binutils. * ar: Add --thin for creating thin archives. -T is a deprecated alias without diagnostics. In many ar implementations -T has a different meaning, as specified by X/Open System Interface. * Add support for AArch64 system registers that were missing in previous releases. * Add support for the LoongArch instruction set. * Add a command-line option, -muse-unaligned-vector-move, for x86 target to encode aligned vector move as unaligned vector move. * Add support for Cortex-R52+ for Arm. * Add support for Cortex-A510, Cortex-A710, Cortex-X2 for AArch64. * Add support for Cortex-A710 for Arm. * Add support for Scalable Matrix Extension (SME) for AArch64. * The --multibyte-handling=[allow|warn|warn-sym-only] option tells the assembler what to when it encoutners multibyte characters in the input. The default is to allow them. Setting the option to "warn" will generate a warning message whenever any multibyte character is encountered. Using the option to "warn-sym-only" will make the assembler generate a warning whenever a symbol is defined containing multibyte characters. (References to undefined symbols will not generate warnings). * Outputs of .ds.x directive and .tfloat directive with hex input from x86 assembler have been reduced from 12 bytes to 10 bytes to match the output of .tfloat directive. * Add support for 'armv8.8-a', 'armv9-a', 'armv9.1-a', 'armv9.2-a' and 'armv9.3-a' for -march in AArch64 GAS. * Add support for 'armv8.7-a', 'armv8.8-a', 'armv9-a', 'armv9.1-a', 'armv9.2-a' and 'armv9.3-a' for -march in Arm GAS. * Add support for Intel AVX512_FP16 instructions. * Add -z pack-relative-relocs/-z no pack-relative-relocs to x86 ELF linker to pack relative relocations in the DT_RELR section. * Add support for the LoongArch architecture. * Add -z indirect-extern-access/-z noindirect-extern-access to x86 ELF linker to control canonical function pointers and copy relocation. * Add --max-cache-size=SIZE to set the the maximum cache size to SIZE bytes. - Add binutils-2.38-branch.diff.gz. - Removed deletion of man pages as they should be properly packages in tarball. - Rebased patches: aarch64-common-pagesize.patch, add-ulp-section.diff, binutils-bfd_h.patch, binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff, binutils-skip-rpaths.patch and binutils-compat-old-behaviour.diff.- Enable PRU architecture for AM335x CPU (Beagle Bone Black board)- use fdupes on datadir - remove RPM_BUILD_ROOT usage and other cleanups- Rebase binutils-2.37-branch.diff: fixes PR28494.- Add binutils-revert-hlasm-insns.diff for compatibility on old code stream that expect 'brcl 0,label' to not be disassembled as 'jgnop label' on s390x. [bsc#1192267]- Rebase binutils-2.37-branch.diff: fixes PR28523 aka boo#1188941.- Fix empty man-pages from broken release tarball [PR28144].- Update binutils-skip-rpaths.patch with contained a memory corruption (boo#1191473).- Configure with --disable-x86-used-note on old code streams. - Disable libalternatives temporarily for build cycle reasons. - make TARGET-bfd=headers again, we patch bfd-in.h - This state submitted to SLE12 and SLE15 code streams for annual toolchain update. [jsc#PM-2767, jsc#SLE-21561, jsc#SLE-19618] - Bump binutils-2.37-branch.diff to 66d5c7003, to include fixes for PR28422, PR28192, PR28391. Also adds some s390x arch14 instructions [jsc#SLE-18637].- Using libalternatives instead of update-alternatives.- Adjust for testsuite fails on older products that configure binutils in different ways, adds binutils-compat-old-behaviour.diff and adjusts binutils-revert-nm-symversion.diff and binutils-revert-plt32-in-branches.diff.- Bump binutils-2.37-branch.diff: fixes PR28138.- Use LTO & PGO build.- Update to binutils 2.37: * The GNU Binutils sources now requires a C99 compiler and library to build. * Support for the arm-symbianelf format has been removed. * Support for Realm Management Extension (RME) for AArch64 has been added. * A new linker option '-z report-relative-reloc' for x86 ELF targets has been added to report dynamic relative relocations. * A new linker option '-z start-stop-gc' has been added to disable special treatment of __start_*/__stop_* references when - -gc-sections. * A new linker options '-Bno-symbolic' has been added which will cancel the '-Bsymbolic' and '-Bsymbolic-functions' options. * The readelf tool has a new command line option which can be used to specify how the numeric values of symbols are reported. - -sym-base=0|8|10|16 tells readelf to display the values in base 8, base 10 or base 16. A sym base of 0 represents the default action of displaying values under 10000 in base 10 and values above that in base 16. * A new format has been added to the nm program. Specifying '--format=just-symbols' (or just using -j) will tell the program to only display symbol names and nothing else. * A new command line option '--keep-section-symbols' has been added to objcopy and strip. This stops the removal of unused section symbols when the file is copied. Removing these symbols saves space, but sometimes they are needed by other tools. * The '--weaken', '--weaken-symbol' and '--weaken-symbols' options supported by objcopy now make undefined symbols weak on targets that support weak symbols. * Readelf and objdump can now display and use the contents of .debug_sup sections. * Readelf and objdump will now follow links to separate debug info files by default. This behaviour can be stopped via the use of the new '-wN' or '--debug-dump=no-follow-links' options for readelf and the '-WN' or '--dwarf=no-follow-links' options for objdump. Also the old behaviour can be restored by the use of the '--enable-follow-debug-links=no' configure time option. The semantics of the =follow-links option have also been slightly changed. When enabled, the option allows for the loading of symbol tables and string tables from the separate files which can be used to enhance the information displayed when dumping other sections, but it does not automatically imply that information from the separate files should be displayed. If other debug section display options are also enabled (eg '--debug-dump=info') then the contents of matching sections in both the main file and the separate debuginfo file *will* be displayed. This is because in most cases the debug section will only be present in one of the files. If however non-debug section display options are enabled (eg '--sections') then the contents of matching parts of the separate debuginfo file will *not* be displayed. This is because in most cases the user probably only wanted to load the symbol information from the separate debuginfo file. In order to change this behaviour a new command line option --process-links can be used. This will allow di0pslay options to applied to both the main file and any separate debuginfo files. * Nm has a new command line option: '--quiet'. This suppresses "no symbols" diagnostic. - Includes fixes for these CVEs: bnc#1181452 aka CVE-2021-20197 aka PR26945 bnc#1183511 aka CVE-2021-20284 aka PR26931 bnc#1184519 aka CVE-2021-20294 aka PR26929 bnc#1184620 aka CVE-2021-3487 aka PR26946 bnc#1184794 aka CVE-2020-35448 aka PR26574 - Also fixes: bsc#1183909 - slow performance of stripping some binaries - Rebased patches: binutils-build-as-needed.diff, binutils-fix-abierrormsg.diff, binutils-fix-invalid-op-errata.diff, binutils-fix-relax.diff, binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff - Removed patches (are in upstream): ppc-ensure-undef-dynamic-weak-undefined.patch and ppc-use-local-plt.patch. - Add binutils-2.37-branch.diff.gz.- ppc-ensure-undef-dynamic-weak-undefined.patch: PPC: ensure_undef_dynamic on weak undef only in plt - ppc-use-local-plt.patch: PowerPC use_local_plt (prerequisite for above patch)- Update 2.36 branch diff which fixes PR27587.- Do not run make TARGET-bfd=headers separately.- Bump 2.36 branch diff (includes fix for PR27441 aka bsc#1182252).- Bump 2.36 branch diff.- Update 2.36 branch diff which should fix PR27311 completely. It fixes also PR27284. - Remove temporary fix 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.- Add temporary upstream fix for PR27311 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.- Update to binutils 2.36: New features in the Assembler: General: * When setting the link order attribute of ELF sections, it is now possible to use a numeric section index instead of symbol name. * Added a .nop directive to generate a single no-op instruction in a target neutral manner. This instruction does have an effect on DWARF line number generation, if that is active. * Removed --reduce-memory-overheads and --hash-size as gas now uses hash tables that can be expand and shrink automatically. X86/x86_64: * Add support for AVX VNNI, HRESET, UINTR, TDX, AMX and Key Locker instructions. * Support non-absolute segment values for lcall and ljmp. * Add {disp16} pseudo prefix to x86 assembler. * Configure with --enable-x86-used-note by default for Linux/x86. ARM/AArch64: * Add support for Cortex-A78, Cortex-A78AE and Cortex-X1, Cortex-R82, Neoverse V1, and Neoverse N2 cores. * Add support for ETMv4 (Embedded Trace Macrocell), ETE (Embedded Trace Extension), TRBE (Trace Buffer Extension), CSRE (Call Stack Recorder Extension) and BRBE (Branch Record Buffer Extension) system registers. * Add support for Armv8-R and Armv8.7-A ISA extensions. * Add support for DSB memory nXS barrier, WFET and WFIT instruction for Armv8.7. * Add support for +csre feature for -march. Add CSR PDEC instruction for CSRE feature in AArch64. * Add support for +flagm feature for -march in Armv8.4 AArch64. * Add support for +ls64 feature for -march in Armv8.7 AArch64. Add atomic 64-byte load/store instructions for this feature. * Add support for +pauth (Pointer Authentication) feature for - march in AArch64. New features in the Linker: * Add --error-handling-script= command line option to allow a helper script to be invoked when an undefined symbol or a missing library is encountered. This option can be suppressed via the configure time switch: --enable-error-handling-script=no. * Add -z x86-64-{baseline|v[234]} to the x86 ELF linker to mark x86-64-{baseline|v[234]} ISA level as needed. * Add -z unique-symbol to avoid duplicated local symbol names. * The creation of PE format DLLs now defaults to using a more secure set of DLL characteristics. * The linker now deduplicates the types in .ctf sections. The new command-line option --ctf-share-types describes how to do this: its default value, share-unconflicted, produces the most compact output. * The linker now omits the "variable section" from .ctf sections by default, saving space. This is almost certainly what you want unless you are working on a project that has its own analogue of symbol tables that are not reflected in the ELF symtabs. New features in other binary tools: * The ar tool's previously unused l modifier is now used for specifying dependencies of a static library. The arguments of this option (or --record-libdeps long form option) will be stored verbatim in the __.LIBDEP member of the archive, which the linker may read at link time. * Readelf can now display the contents of LTO symbol table sections when asked to do so via the --lto-syms command line option. * Readelf now accepts the -C command line option to enable the demangling of symbol names. In addition the --demangle=