libsnapper5-0.8.16-150300.3.6.1<>,Idap9|++Lw=]R4  g] k }kK%ܕa̫w7\;X"\q cX@D1|mOTυp})*eemP"@di v4y6( dM;Ձ۫!҉ ?#W,9?{T%*!*UtlAzr8 W]E9\_4Q@3(cG|Uu`[|ALV/Aߣx$,όSgj~pD=|?=ld " M  17>   @ N p4X/ //(8^9d^:^>7(@70B7?F7oG7H7I7X8Y8Z8T[8d\8h]8^98b9c:d;e;f;l;u;,v;dw< xGPL-2.0-onlyhttps://www.suse.com/System/Librarieshttp://snapper.io/linuxx86_64/sbin/ldconfig PNAME=snapper SUBPNAME= SYSC_TEMPLATE=/usr/share/fillup-templates/sysconfig.$PNAME$SUBPNAME # If template not in new /usr/share/fillup-templates, fallback to old TEMPLATE_DIR if [ ! -f $SYSC_TEMPLATE ] ; then TEMPLATE_DIR=/var/adm/fillup-templates SYSC_TEMPLATE=$TEMPLATE_DIR/sysconfig.$PNAME$SUBPNAME fi SD_NAME="" if [ -x /bin/fillup ] ; then if [ -f $SYSC_TEMPLATE ] ; then echo "Updating /etc/sysconfig/$SD_NAME$PNAME ..." mkdir -p /etc/sysconfig/$SD_NAME touch /etc/sysconfig/$SD_NAME$PNAME /bin/fillup -q /etc/sysconfig/$SD_NAME$PNAME $SYSC_TEMPLATE fi else echo "ERROR: fillup not found. This should not happen. Please compare" echo "/etc/sysconfig/$PNAME and $TEMPLATE_DIR/sysconfig.$PNAME and" echo "update by hand." fih%!"FCyAA큤AA큤A큤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.so.5.2.1rootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootsnapper-0.8.16-150300.3.6.1.src.rpmconfig(libsnapper5)libsnapper.so.5()(64bit)libsnapper5libsnapper5(x86-64) @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@    /bin/sh/sbin/ldconfigconfig(libsnapper5)coreutilsdiffutilsfillupgreplibacl.so.1()(64bit)libacl.so.1(ACL_1.0)(64bit)libboost_system.so.1.66.0()(64bit)libboost_thread.so.1.66.0()(64bit)libbtrfs.so.0()(64bit)libc.so.6()(64bit)libc.so.6(GLIBC_2.14)(64bit)libc.so.6(GLIBC_2.2.5)(64bit)libc.so.6(GLIBC_2.27)(64bit)libc.so.6(GLIBC_2.28)(64bit)libc.so.6(GLIBC_2.3)(64bit)libc.so.6(GLIBC_2.3.2)(64bit)libc.so.6(GLIBC_2.3.4)(64bit)libc.so.6(GLIBC_2.4)(64bit)libc.so.6(GLIBC_2.7)(64bit)libc.so.6(GLIBC_2.8)(64bit)libgcc_s.so.1()(64bit)libgcc_s.so.1(GCC_3.0)(64bit)libmount.so.1()(64bit)libmount.so.1(MOUNT_2.19)(64bit)libmount.so.1(MOUNT_2.24)(64bit)libstdc++.so.6()(64bit)libstdc++.so.6(CXXABI_1.3)(64bit)libstdc++.so.6(GLIBCXX_3.4)(64bit)libstdc++.so.6(GLIBCXX_3.4.11)(64bit)libstdc++.so.6(GLIBCXX_3.4.14)(64bit)libstdc++.so.6(GLIBCXX_3.4.15)(64bit)libstdc++.so.6(GLIBCXX_3.4.19)(64bit)libstdc++.so.6(GLIBCXX_3.4.20)(64bit)libstdc++.so.6(GLIBCXX_3.4.21)(64bit)libstdc++.so.6(GLIBCXX_3.4.9)(64bit)libxml2.so.2()(64bit)libxml2.so.2(LIBXML2_2.4.30)(64bit)libxml2.so.2(LIBXML2_2.5.2)(64bit)libxml2.so.2(LIBXML2_2.6.0)(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)util-linux0.8.16-150300.3.6.13.0.4-14.6.0-14.0-15.2-14.14.3dNd7`T@`H`_H@_$_@__^@_ _i@_R,@_N7_L@_H_G@_{_ L^@^^ P@^@]B]@]]]i\@\G\A[H[@[ͻ[[;@[R@[][[U@[ @Z4@Z@Zo Zk@ZV@Z'Z@Y@Y@Y@XXg@X@X@XZnXRXx@X@WWt@W@W@W W@V@Vs@Vn@VCVBVBVBUAUݪ@U@U3@UmUcU_@UY@UHU-@T@TPTgT!TT}TT@T@TT@THaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comlnussel@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.commvidner@suse.commvidner@suse.commvidner@suse.comjlopez@suse.commvidner@suse.comaschnell@suse.comiforster@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comgergo@borus.huaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comjsrain@suse.czaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comkukuk@suse.derbrown@suse.comaschnell@suse.comlslezak@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comaschnell@suse.comshundhammer@suse.deaschnell@suse.comaschnell@suse.comaschnell@suse.comlslezak@suse.czaschnell@suse.comaschnell@suse.comshundhammer@suse.deaschnell@suse.comaschnell@suse.comaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.dejreidinger@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.comaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.deaschnell@suse.de- improved responsiveness of snapperd when a btrfs quota rescan is running (see bsc#1211459) * added pr821.patch- avoid stale btrfs qgroups on transactional systems (bsc#1210151) * added pr805.patch - wait for existing btrfs quota rescans to finish (bsc#1210150) * added pr790.patch- fixed creating root config (root prefix handling) (gh#openSUSE/snapper#627)- updated translations (bsc#1149754)- fixed testsuite for equal-date (gh#openSUSE/snapper#526)- added option to abbreviate columns in table (see gh#openSUSE/snapper#268) - version 0.8.15- in systemd-helper continue with other configs if one config is broken (gh#openSUSE/snapper#495)- fixed compilation with --disable-btrfs (gh#openSUSE/snapper#505)- do not override passwd after getpwuid_r et.al. calls (gh#openSUSE/snapper#589)- state in man-pages that ext4 support is discontinued (gh#openSUSE/snapper#331)- use C++11 regexes instead of own regcomp/regexec wrapper class (see gh#openSUSE/snapper#583)- added option to cleanup to make requested free space available (jsc#SLE-15765) - version 0.8.14- package new snapperd.service file on Debian based distributions (gh#openSUSE/snapper#557)- activate snapperd using systemd service- fix LVM setup for volume groups and logical volumes with one character long names (gh#openSUSE/snapper#465)- improved error messages for wrong command line options and arguments (bsc#1150156)- call fsync after writing snapshot info file (bsc#1078336) - version 0.8.13- fixed error when using mksubvolume to create /tmp (bsc#1174401) - version 0.8.12- added error handing for failed ambit detection (bsc#1174038) - version 0.8.11- special rollback for transactional server (bsc#1172273) - version 0.8.10- updated translations (bsc#1149754) - generate dsc file for Ubuntu 19.10- Fix "Snapper is not creating the post snapshot" (bsc#1160938) - Fix `make clean; make check` failing in zypp-plugin (bsc#1160891) - version 0.8.9- Add a "writeble copy" description to the 2nd snapshot of a rollback (Hrotkó Gábor). - Fix the previous version to build on Debian, Ubuntu, and old GCC (bsc#1160306). - version 0.8.8- snapper-zypp-plugin subpackage rewritten from Python to C++ (jsc#SLE-10500) - added integration tests in snapper-testsuite subpackage - version 0.8.7- add --machine-readable option for CSV and JSON outputs. - add --columns option for selecting columns in the commands list, list-configs and get-config. - bsc#1149322 - version 0.8.6- allow trailing comments in configuration files (bsc#1005342) - version 0.8.5- allow to make snapshot from other snapshot that the current one (jsc#SLE-7333) - version 0.8.4- reusing existing subvolumes on mksubvolume run (bsc#1138725, bsc#1126900, gh#openSUSE/snapper#236)- fixed seg.fault during rollback if the previous default subvolume is missing in the snapshot list (bsc#1130273) - version 0.8.3- adapted to libbtrfs changes to resurrect special btrfs directory comparison (bsc#1111414) - version 0.8.2- avoid deadlock for special btrfs directory comparison (bsc#1049574)- validate snapshot id corresponding to the default subvolume before using it for the current config (gh#openSUSE/snapper#449) - version 0.8.1- extended space aware cleanup algorithm to ensure minimal free space for btrfs (within known ranges) (fate#325774) - version 0.8.0- fixed querying default and active snapshot if compiled without rollback support (gh#openSUSE/snapper#442) - version 0.7.2- disallow to delete special (for btrfs currently mounted and next to be mounted) snapshots (fate#326479) - version 0.7.1- mark active and default btrfs subvolume in list output (fate#326479) - reorder columns in snapper list output (fate#326479) - version 0.7.0- right align used space in table output - version 0.6.1- show used space (exclusive space of btrfs qgroup) for each snapshot (fate#323843) - version 0.6.0- avoid setenv after fork (bsc#1107587)- fixed logging during shutdown of snapperd to avoid core dumps (bsc#1096401 and others) - version 0.5.6- merged (gh#openSUSE/snapper#409) to build with boost 1.67.0 (bsc#1096208) - version 0.5.5- move warning in case of non-UTF8 locale to man page (bsc#1092103)- soften error handling if setting locale fails due to broken system setup (bsc#1085832)- create subvolume instead of snapshot for initial system (bsc#1077240) - version 0.5.4- improved error handling for systemd services (gh#openSUSE/snapper#382)- use python3 instead of python2 (bsc#1070324)- Switched from cron to systemd timers (spec file based distributions) (fate#324529) - version 0.5.3- Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)- fix compilation with boost 1.65.0 (gh#openSUSE/snapper#354) (bsc#1061262) - version 0.5.2- fixed table formatting for non-ACSII characters (bsc#1051901) (::mbrtowc behavior has been changed in glibc-2.22) - version 0.5.1- set cleanup algorithm for rollback snapshots (fate#321773) - version 0.5.0- generate build file for Ubuntu 17.04 - version 0.4.5- remove read-only mount option for new fstab entry in mksubvolume (bsc#1030257) - version 0.4.4- deal with CaaSP btrfs setup where certain subvolumes are read-only (bsc#1018302 and bsc#1018095) - version 0.4.3- build SLE12 versions with quota support again (bsc#1021370) - version 0.4.2- fixed --root option (bsc#1016633) - version 0.4.1- support option --no-dbus for all snapper commands (fate#319404, fate#321049) - version 0.4.0- catch exception if setting default subvolume fails (bsc#1008544)- fixed use of getpwuid_r, getpwnam_r and getgrnam_r- merged patch to fix order of object destruction on shutdown (gh#openSUSE/snapper#258)- better messages for some btrfs quota errors (gh#openSUSE/snapper#257)- merged SELinux support from Red Hat (disabled at compile-time per default) (gh#openSUSE/snapper#239) - version 0.3.3- reverted some changes done accidentally to default-config (see fate#312751) - version 0.3.2- make sure 'component' string is not destroyed prematurely (bsc#940154) - version 0.3.1- implemented space aware cleanup algorithms (fate#312751) - version 0.3.0- allow to setup quota (for fate#312751)- improved error message (see bsc#956606)- Allow rollback only for the root file system (bsc#954445) - version 0.2.10- added conditional compilation of installation-helper (gh#openSUSE/snapper#202)- updated translations- Call script /usr/lib/snapper/plugins/rollback if present upon rollback (fate#319108) - version 0.2.9- added program to create btrfs subvolume suitable for systems supporting rollback (bsc#944120)- improved error reporting (bsc#940046)- allow to disable zypp plugin via environment variable (see fate#319316) - version 0.2.8- extended snapper-configs man-page- allow to set cleanup algorithm for snapshots created by helper programs- added error message for invalid locale setting (see bsc#933241)- allow list-configs command to work on different root (for fate#317900)- Version 0.2.7- added a helper to create snapshots without D-Bus during system installation/upgrade (fate#317973)- added option --sync to delete command (fate#317066)- added option --input to diff command - sort files according to locale- allow to set userdata for snapshots created by helper programs- install systemd unit files and helper (see gh#openSUSE/snapper#154)- drop -mt decoration from boost libraries (see http://www.boost.org/users/history/version_1_40_0.html)- added comments in helper program- added helper to support installation into subvolume (fate#318392) - added root-prefix parameter for config functions - pass single struct instead of many values to create and modify snapshot functions - removed deprecated functions - version 0.2.6- use C++11 chrono::steady_clock- stricter dbus string escaping (see bsc#913238) - implemented dbus string escaping in pam_snapper - version 0.2.5- fixed compilation with clang- ignore everything in .snapshots not matching a number- improved error messages (bsc#889928 and bsc#903834)- support weekly snapshots in cleanup algorithm (see gh#openSUSE/snapper#135)- use boost unit test framework and automake check feature/bin/sh/sbin/ldconfiglibsnapper1libsnapper2libsnapper3libsnapper4sheep06 1687183840 0.8.16-150300.3.6.10.8.16-150300.3.6.10.8.16-150300.3.6.1snapperconfig-templatesdefaultconfigsfiltersbase.txtlvm.txtx11.txtlibsnapper.so.5libsnapper.so.5.2.1snapperAUTHORSCOPYINGsysconfig.snapper/etc//etc/snapper//etc/snapper/config-templates//etc/snapper/filters//usr/lib64//usr/share/doc/packages//usr/share/doc/packages/snapper//usr/share/fillup-templates/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.suse.de/SUSE:Maintenance:29460/SUSE_SLE-15-SP3_Update/5ad6778c8cb22e8370e8307c5a5f80f6-snapper.SUSE_SLE-15-SP3_Updatedrpmxz5x86_64-suse-linuxdirectoryASCII textELF 64-bit LSB shared object, x86-64, version 1 (GNU/Linux), dynamically linked, BuildID[sha1]=5549668e8b1947119716616fc057df0cf759ed56, stripped$PRR(R'R)RRRR#R"RRR R%R!R$RRRRRR RRRRRR R R&RRR RR R( Wq=&:Nutf-80f20c9d3814cd302d972f0b61d39b4464ecb735de705d99bcd3d08c2eb6a4f51?7zXZ !t/]"k%AKIp2=aS'Zͱ冱9Dp9 ݅aEGY?J?Qw[۳TU1&9 ub в9n,YZs,~=I8~#'F2>9.gEeRm\ǫdO6 jrLs+#' gl)rݢܫfuL_d(e").VTb wi/,15{4 $j'"qS(*T?L0ӝ-蘛t_Àε\J:ƽ-mw<ٞ|K*/1؁P>Kfʌ-%[ϥq)WTBĉ@CvHᴥ@8+9&ӏ8Us:V) {"\hhU~2z+b|!ʖV.C4YI/@X8,N~doQ|ѝT87kA(KSPS15O5GK}-jZXjZyo檻{e /ڽx}9q7UQ~ɪ9:iġS5|?qN4_ęB7&ԷeMTq`{y_T]c=y6$ uш $ϒ(SͿ;g!YcV&*Zl4T[F)k1L0Y$*~^\;>3>@(Nu |p}mj A?3_{m#Cy^scJ"wZQZAt@kFg 0dx4׾VT1\Tb\;ŋGN 믺 QoDa fXpL=$OUԡg*m<݊ml$PbHZן/ {.39Z\=ıASI R'X-a;DDl`1w M5|἗ʍZgQA`(y%b5 Yqk -U"P{^_']-KHPIR2ЋGR;Sr25ZߴVlͨ?s~|e>:G)!xP`C>{·zjr72b9ay:2c^ԫ͡d0{!#gC4G˕sAaH<7}]ŢjgvJan I>7aZL#PNwgG#b|^uڃ.4.T> LMd ո)/}q U'>6“J|'pqI~ 1 'h^@@ Ĝ$fB@ fL3v[nU&8US ̏Be.o ?e8jcUm׻VݖѰ0ӬKꢷnc VFU_ؒ"inn/ܻo{P<$XɄeEtC^fvQd _cwL$͗7(;*abWKXqt;@6);׷{X.R&uc4#u!A` 7/ YZ