cross-sparc64-binutils-2.43-150100.7.49.1<>,v|fBp9|-Ic=K39a{eALF矛Ƃ*b_O z=#*569鬿iIcΕi^w9SEHjȚ+Zxܺ,Er+E?g3,iV3 f!0 mˈ1J1 8ٶڮ-|@'qdBJ"VrHX?yFep Ɠ5+0Z( Wct>>i?id , 96Y o\0\ \ \ \ \ \\\  \"D"|"$*($X8$`9':1FKGK4\HL\IN\XNpYNx\N\]P\^UbVccW dWeWfWlWuW\vY$wd\xf\ygrziLi\i`ifiCcross-sparc64-binutils2.43150100.7.49.1GNU BinutilsC compiler utilities: ar, as, gprof, ld, nm, objcopy, objdump, ranlib, size, strings, and strip. These utilities are needed whenever you want to compile a program or kernel.fBh02-armsrv2aSUSE Linux Enterprise 15SUSE LLC GFDL-1.3-only AND GPL-3.0-or-laterhttps://www.suse.com/Development/Tools/Buildinghttps://www.gnu.org/software/binutils/linuxaarch64< x)hL.H)h#$$#$""!!c"{""!""+#1#B!"*";##"}  !! +!s""#4"!###"!""##!""$)$:#!4 !5!F"L"] -!E!V." #"#3AAAA큤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../../bin/sparc64-suse-linux-ar../../bin/sparc64-suse-linux-as../../bin/sparc64-suse-linux-ld../../bin/sparc64-suse-linux-ld.bfd../../bin/sparc64-suse-linux-nm../../bin/sparc64-suse-linux-objcopy../../bin/sparc64-suse-linux-objdump../../bin/sparc64-suse-linux-ranlib../../bin/sparc64-suse-linux-readelf../../bin/sparc64-suse-linux-striprootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootcross-sparc64-binutils-2.43-150100.7.49.1.src.rpmcross-sparc64-binutilscross-sparc64-binutils(aarch-64) @@@@@@@@     infold-linux-aarch64.so.1()(64bit)ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)libc.so.6()(64bit)libc.so.6(GLIBC_2.17)(64bit)libdl.so.2()(64bit)libdl.so.2(GLIBC_2.17)(64bit)libz.so.1()(64bit)libz.so.1(ZLIB_1.2.0)(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PartialHardlinkSets)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)update-alternatives3.0.4-14.6.0-14.0.4-14.0-15.2-14.14.1f@f@fj@f2.e7@eeeeLev@edܺ@d@du@d6@d@ddxcU@c@cױ@cӼcӼc@c<@ctcWcWcMCcIO@cbbbWb&b@b@by@bu brjbrjbrjbobf@bT@bT@b8hb)@b!@b bs@bs@b!b@b@a@a@aW@aaya(@aa`2a;Ha8a /`]`]`+`]`?z@`<@``@`>` a@_$_@_E@_h_`_7@_-B@_@^{G^Y^V]^K^K^5h@^r]*]҇]@]]@]v>]ja@]5@\ \@\@\@\k\Yz\X)@\I\ @[1[9@[`O@[L[)Z@ZlZZZ%ZZZk@Ze@Z_:Y*@Y5Y@YY@YJYYx@Yx@X@XDX@XX@XO@X @XXe@XVz@X>@X<@WW@W|VV@V2VHV@V<@VCV @U4@U@UUb@U@Ux&UY@UY@UW1@T@TTT@T|X@TSymatz@suse.commatz@suse.comschwab@suse.debwiedemann@suse.comdimstar@opensuse.orgschwab@suse.dematz@suse.commatz@suse.commatz@suse.comschwab@suse.dematz@suse.commatz@suse.commatz@suse.comschwab@suse.demliska@suse.czmliska@suse.czrguenther@suse.commatz@suse.commliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czrguenther@suse.commliska@suse.czdmueller@suse.commatz@suse.comschwab@suse.dematz@suse.comdmueller@suse.commatz@suse.commliska@suse.czmliska@suse.czmliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czschwab@suse.dematz@suse.commliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmatz@suse.commatz@suse.commatz@suse.commeissner@suse.comwbauer@tmo.atmliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czmatwey.kornilov@gmail.comdmueller@suse.commliska@suse.czmatz@suse.commliska@suse.czmatz@suse.commliska@suse.czmatz@suse.comStefan Schubert schubi@suse.dematz@suse.commliska@suse.czmliska@suse.czmliska@suse.czschwab@suse.demliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmliska@suse.czmatz@suse.commatz@suse.comstefan.bruens@rwth-aachen.demliska@suse.czmatz@suse.commliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czmliska@suse.czrguenther@suse.commliska@suse.czmliska@suse.czmliska@suse.czschwab@suse.dematz@suse.commatz@suse.commliska@suse.czmatz@suse.commatz@suse.commatz@suse.comdmueller@suse.commliska@suse.czmatz@suse.commliska@suse.czmliska@suse.czschwab@suse.demliska@suse.czmliska@suse.czmliska@suse.czmatz@suse.commatz@suse.commliska@suse.czmatz@suse.comrguenther@suse.comrguenther@suse.comschwab@suse.deafaerber@suse.dematz@suse.comschwab@suse.derguenther@suse.comschwab@suse.dematz@suse.comschwab@suse.dedimstar@opensuse.orgschwab@suse.deafaerber@suse.dematz@suse.commliska@suse.czrguenther@suse.commatz@suse.commatz@suse.commatz@suse.commatz@suse.comrguenther@suse.comrguenther@suse.comafaerber@suse.derguenther@suse.comrguenther@suse.commatz@suse.comrguenther@suse.comschwab@linux-m68k.orgrguenther@suse.comrguenther@suse.comafaerber@suse.dejengelh@inai.deidonmez@suse.comrguenther@suse.comstefan.bruens@rwth-aachen.derguenther@suse.comrguenther@suse.comrguenther@suse.comrguenther@suse.comrguenther@suse.comrguenther@suse.comrguenther@suse.comschwab@suse.deschwab@suse.deschwab@suse.dematz@suse.deafaerber@suse.deschwab@linux-m68k.orgmatz@suse.deafaerber@suse.dedmueller@suse.commatz@suse.demeissner@suse.comhrvoje.senjan@gmail.comschwab@suse.deschwab@suse.derguenther@suse.comdimstar@opensuse.orgmatz@suse.deafaerber@suse.de- Update to current 2.43.1 branch [PED-10474]: * PR32109 - fuzzing problem * PR32083 - LTO vs overridden common symbols * PR32067 - crash with LTO-plugin and --oformat=binary * PR31956 - LTO vs wrapper symbols * riscv - add Zimop and Zcmop extensions - Adjusted binutils-2.43-branch.diff.gz.- Update to version 2.43: * new .base64 pseudo-op, allowing base64 encoded data as strings * Intel APX: add support for CFCMOV, CCMP, CTEST, zero-upper, NF (APX_F now fully supported) * x86 Intel syntax now warns about more mnemonic suffixes * macros and .irp/.irpc/.rept bodies can use \+ to get at number of times the macro/body was executed * aarch64: support 'armv9.5-a' for -march, add support for LUT and LUT2 * s390: base register operand in D(X,B) and D(L,B) can now be omitted (ala 'D(X,)'); warn when register type doesn't match operand type (use option 'warn-regtype-mismatch=[strict|relaxed|no]' to adjust) * riscv: support various extensions: Zacas, Zcmp, Zfbfmin, Zvfbfmin, Zvfbfwma, Smcsrind/Sscsrind, XCvMem, XCvBi, XCvElw, XSfCease, all at version 1.0; remove support for assembly of privileged spec 1.9.1 (linking support remains) * arm: remove support for some old co-processors: Maverick and FPA * mips: '--trap' now causes either trap or breakpoint instructions to be emitted as per current ISA, instead of always using trap insn and failing when current ISA was incompatible with that * LoongArch: accept .option pseudo-op for fine-grained control of assembly code options; add support for DT_RELR * readelf: now displays RELR relocations in full detail; add -j/--display-section to show just those section(s) content according to their type * objdump/readelf now dump also .eh_frame_hdr (when present) when dumping .eh_frame * gprofng: add event types for AMD Zen3/Zen4 and Intel Ice Lake processors; add minimal support for riscv * linker: - put .got and .got.plt into relro segment - add -z isa-level-report=[none|all|needed|used] to the x86 ELF linker to report needed and used x86-64 ISA levels - add --rosegment option which changes the -z separate-code option so that only one read-only segment is created (instead of two) - add --section-ordering-file option to add extra mapping of input sections to output sections - add -plugin-save-temps to store plugin intermediate files permanently - Removed binutils-2.42.tar.bz2, binutils-2.42-branch.diff.gz. - Added binutils-2.43.tar.bz2, binutils-2.43-branch.diff.gz. - Removed upstream patch riscv-no-relax.patch. - Rebased ld-relro.diff and binutils-revert-rela.diff.- binutils-pr22868.diff: Remove obsolete patch - Undefine _FORTIFY_SOURCE when running checks- Allow to disable profiling- Use %patch -P N instead of deprecated %patchN.- riscv-no-relax.patch: RISC-V: Don't generate branch/jump relocation if symbol is local when no-relax- Add binutils-disable-code-arch-error.diff to demote an error about swapped .arch/.code directives to a warning. It happens in the wild.- Update to version 2.42: * Add support for many aarch64 extensions: SVE2.1, SME2.1, B16B16, RASv2, LSE128, GCS, CHK, SPECRES2, LRCPC3, THE, ITE, D128, XS and flags to enable them: '+fcma', '+jscvt', '+frintts', '+flagm2', '+rcpc2' and '+wfxt' * Add experimantal support for GAS to synthesize call-frame-info for some hand-written asm (--scfi=experimental) on x86-64. * Add support for more x86-64 extensions: APX: 32 GPRs, NDD, PUSH2/POP2, PUSHP/POPP; USER_MSR, AVX10.1, PBNDKB, SM4, SM3, SHA512, AVX-VNNI-INT16. * Add support for more RISC-V extensions: T-Head v2.3.0, CORE-V v1.0, SiFive VCIX v1.0. * BPF assembler: ';' separates statements now, and does not introduce line comments anymore (use '#' or '//' for this). * x86-64 ld: Add '-z mark-plt/-z nomark-plt' to mark PLT entries with dynamic tags. * risc-v ld: Add '--[no-]check-uleb128'. * New linker script directive: REVERSE, to be combined with SORT_BY_NAME or SORT_BY_INIT_PRIORITY, reverses the generated order. * New linker options --warn-execstack-objects (warn only about execstack when input object files request it), and --error-execstack plus - -error-rxw-segments to convert the existing warnings into errors. * objdump: Add -Z/--decompress to be used with -s/--full-contents to decompress section contents before displaying. * readelf: Add --extra-sym-info to be used with --symbols (currently prints section name of references section index). * objcopy: Add --set-section-flags for x86_64 to include SHF_X86_64_LARGE. * s390 disassembly: add target-specific disasm option 'insndesc', as in "objdump -M insndesc" to display an instruction description as comment along with the disassembly. - Add binutils-2.42-branch.diff.gz. - Rebased s390-biarch.diff. - Adjusted binutils-revert-hlasm-insns.diff, binutils-revert-plt32-in-branches.diff and binutils-revert-rela.diff for upstream changes. - Removed binutils-2.41-branch.diff.gz, binutils-2.41.tar.bz2, binutils-2.41-branch.diff.gz. - Removed binutils-use-less-memory.diff, binutils-old-makeinfo.diff and riscv-relro.patch (all upstreamed). - Removed add-ulp-section.diff, we use a different mechanism for live patching since a long time.- Add binutils-use-less-memory.diff to be a little nicer to 32bit userspace and huge links. [bsc#1216908]- riscv-relro.patch: RISC-V: Protect .got with relro- Add libzstd-devel to Requires of binutils-devel. (bsc#1215341)- Update to version 2.41 [PED-5778]: * The MIPS port now supports the Sony Interactive Entertainment Allegrex processor, used with the PlayStation Portable, which implements the MIPS II ISA along with a single-precision FPU and a few implementation-specific integer instructions. * Objdump's --private option can now be used on PE format files to display the fields in the file header and section headers. * New versioned release of libsframe: libsframe.so.1. This release introduces versioned symbols with version node name LIBSFRAME_1.0. This release also updates the ABI in an incompatible way: this includes removal of sframe_get_funcdesc_with_addr API, change in the behavior of sframe_fre_get_ra_offset and sframe_fre_get_fp_offset APIs. * SFrame Version 2 is now the default (and only) format version supported by gas, ld, readelf and objdump. * Add command-line option, --strip-section-headers, to objcopy and strip to remove ELF section header from ELF file. * The RISC-V port now supports the following new standard extensions: - Zicond (conditional zero instructions) - Zfa (additional floating-point instructions) - Zvbb, Zvbc, Zvkg, Zvkned, Zvknh[ab], Zvksed, Zvksh, Zvkn, Zvknc, Zvkng, Zvks, Zvksc, Zvkg, Zvkt (vector crypto instructions) * The RISC-V port now supports the following vendor-defined extensions: - XVentanaCondOps * Add support for Intel FRED, LKGS and AMX-COMPLEX instructions. * A new .insn directive is recognized by x86 gas. * Add SME2 support to the AArch64 port. * The linker now accepts a command line option of --remap-inputs = to relace any input file that matches with . In addition the option --remap-inputs-file= can be used to specify a file containing any number of these remapping directives. * The linker command line option --print-map-locals can be used to include local symbols in a linker map. (ELF targets only). * For most ELF based targets, if the --enable-linker-version option is used then the version of the linker will be inserted as a string into the .comment section. * The linker script syntax has a new command for output sections: ASCIZ "string" This will insert a zero-terminated string at the current location. * Add command-line option, -z nosectionheader, to omit ELF section header. - Removed obsolete patches: binutils-2.40-branch.diff.gz, riscv-dynamic-tls-reloc-pie.patch, riscv-pr22263-1.patch, extensa-gcc-4_3-fix.diff . - Add binutils-2.41-branch.diff.gz . - Add binutils-old-makeinfo.diff for SLE-12 and older. - Rebased aarch64-common-pagesize.patch and binutils-revert-rela.diff . - Contains fixes for these non-CVEs (not security bugs per upstreams SECURITY.md): * bsc#1209642 aka CVE-2023-1579 aka PR29988 * bsc#1210297 aka CVE-2023-1972 aka PR30285 * bsc#1210733 aka CVE-2023-2222 aka PR29936 * bsc#1213458 aka CVE-2021-32256 aka PR105039 (gcc) * bsc#1214565 aka CVE-2020-19726 aka PR26240 * bsc#1214567 aka CVE-2022-35206 aka PR29290 * bsc#1214579 aka CVE-2022-35205 aka PR29289 * bsc#1214580 aka CVE-2022-44840 aka PR29732 * bsc#1214604 aka CVE-2022-45703 aka PR29799 * bsc#1214611 aka CVE-2022-48065 aka PR29925 * bsc#1214619 aka CVE-2022-48064 aka PR29922 * bsc#1214620 aka CVE-2022-48063 aka PR29924 * bsc#1214623 aka CVE-2022-47696 aka PR29677 * bsc#1214624 aka CVE-2022-47695 aka PR29846 * bsc#1214625 aka CVE-2022-47673 aka PR29876- Add binutils-disable-dt-relr.sh for an compatibility problem caused by binutils-revert-rela.diff in SLE codestreams. Needed for update of glibc as that would otherwise pick up the broken relative relocs support. [bsc#1213282, PED-1435] - This only existed only for a very short while in SLE-15, as the main variant in devel:gcc subsumed this in binutils-revert-rela.diff. Hence: - Remove binutils-disable-dt-relr.sh as subsumed.- riscv-dynamic-tls-reloc-pie.patch: Backport for PR ld/22263 and PR ld/25694 - riscv-pr22263-1.patch: Backport for PR ld/22263- Rebase branch patch (includes fix for PR30281).- Document fixed CVEs: * bnc#1208037 aka CVE-2023-25588 aka PR29677 * bnc#1208038 aka CVE-2023-25587 aka PR29846 * bnc#1208040 aka CVE-2023-25585 aka PR29892 * bnc#1208409 aka CVE-2023-0687 aka PR29444- Enable bpf-none cross target and add bpf-none to the multitarget set of supported targets.- Disable packed-relative-relocs for old codestreams. They generate buggy relocations when binutils-revert-rela.diff is active. [bsc#1206556]- Disable ZSTD debug section compress by default.- Enable zstd compression algorithm (instead of zlib) for debug info sections by default.- Pack libgprofng only for supported platforms.- Remove upstreamed patch binutils-maxpagesize.diff.- Rebase binutils-2.40-branch.diff.gz as it includes fix for PR30043. - Move libgprofng-related libraries to the proper locations (packages). - Add --without=bootstrap for skipping of bootstrap (faster testing of the package).- Remove broken arm32-avoid-copyreloc.patch to fix [gcc#108515]- Update to version 2.40: * Objdump has a new command line option --show-all-symbols which will make it display all symbols that match a given address when disassembling. (Normally only the first symbol that matches an address is shown). * Add --enable-colored-disassembly configure time option to enable colored disassembly output by default, if the output device is a terminal. Note, this configure option is disabled by default. * DCO signed contributions are now accepted. * objcopy --decompress-debug-sections now supports zstd compressed debug sections. The new option --compress-debug-sections=zstd compresses debug sections with zstd. * addr2line and objdump --dwarf now support zstd compressed debug sections. * The dlltool program now accepts --deterministic-libraries and - -non-deterministic-libraries as command line options to control whether or not it generates deterministic output libraries. If neither of these options are used the default is whatever was set when the binutils were configured. * readelf and objdump now have a newly added option --sframe which dumps the SFrame section. * Add support for Intel RAO-INT instructions. * Add support for Intel AVX-NE-CONVERT instructions. * Add support for Intel MSRLIST instructions. * Add support for Intel WRMSRNS instructions. * Add support for Intel CMPccXADD instructions. * Add support for Intel AVX-VNNI-INT8 instructions. * Add support for Intel AVX-IFMA instructions. * Add support for Intel PREFETCHI instructions. * Add support for Intel AMX-FP16 instructions. * gas now supports --compress-debug-sections=zstd to compress debug sections with zstd. * Add --enable-default-compressed-debug-sections-algorithm={zlib,zstd} that selects the default compression algorithm for --enable-compressed-debug-sections. * Add support for various T-Head extensions (XTheadBa, XTheadBb, XTheadBs, XTheadCmo, XTheadCondMov, XTheadFMemIdx, XTheadFmv, XTheadInt, XTheadMemIdx, XTheadMemPair, XTheadMac, and XTheadSync) from version 2.0 of the T-Head ISA manual, which are implemented in the Allwinner D1. * Add support for the RISC-V Zawrs extension, version 1.0-rc4. * Add support for Cortex-X1C for Arm. * New command line option --gsframe to generate SFrame unwind information on x86_64 and aarch64 targets. * The linker has a new command line option to suppress the generation of any warning or error messages. This can be useful when there is a need to create a known non-working binary. The option is -w or --no-warnings. * ld now supports zstd compressed debug sections. The new option - -compress-debug-sections=zstd compresses debug sections with zstd. * Add --enable-default-compressed-debug-sections-algorithm={zlib,zstd} that selects the default compression algorithm for --enable-compressed-debug-sections. * Remove support for -z bndplt (MPX prefix instructions). - Rebased patches: add-ulp-section.diff, ld-relro.diff, binutils-revert-plt32-in-branches.diff, cross-avr-size.patch. - Removed patch: binutils-pr29482.diff. - New patch: extensa-gcc-4_3-fix.diff. - Includes fixes for these CVEs: * bnc#1206080 aka CVE-2022-4285 aka PR29699 - Enable by default: --enable-colored-disassembly.- fix build on x86_64_vX platforms- Add binutils-maxpagesize.diff for a problem on old code streams, where we would generate too large binaries.- s390-pic-dso.diff: use %pB instead of %B- SLE toolchain update of binutils. Update to 2.39 from 2.37, which means obsoleting and hence removing these patches: binutils-add-efi-aarch64-1.diff, binutils-add-efi-aarch64-2.diff, binutils-add-efi-aarch64-3.diff, binutils-fix-keepdebug.diff, binutils-add-z16-name.diff. Implements [jsc#SLE-25046, jsc#PED-2029, jsc#PED-2035, jsc#PED-2033, jsc#PED-2030, jsc#PED-2038, jsc#PED-2032, jsc#PED-2034, jsc#PED-2031, jsc#SLE-25047] - This fixes these CVEs relative to 2.37: [bsc#1188374, bsc#1185597] aka (GCC) PR99935 aka CVE-2021-3648 [bsc#1193929] aka PR28694 aka CVE-2021-45078 [bsc#1194783] aka (GCC) PR98886 aka CVE-2021-46195 [bsc#1197592] aka (GCC) PR105039 aka CVE-2022-27943 [bsc#1202966] aka PR29289 aka CVE-2022-38126 [bsc#1202967] aka PR29290 aka CVE-2022-38127 [bsc#1202969] aka CVE-2021-3826- add arm32-avoid-copyreloc.patch for PR16177 (bsc#1200962)- Add binutils-pr29482.diff for PR29482, aka CVE-2022-38533 [bsc#1202816]- Rebase binutils-2.39-branch.diff.gz that contains fix for PR29451.- Add binutils-2.39-branch.diff.gz. - Explicitly enable --enable-warn-execstack=yes and --enable-warn-rwx-segments=yes. - Add gprofng subpackage.- Update to binutils 2.39: * The ELF linker will now generate a warning message if the stack is made executable. Similarly it will warn if the output binary contains a segment with all three of the read, write and execute permission bits set. These warnings are intended to help developers identify programs which might be vulnerable to attack via these executable memory regions. The warnings are enabled by default but can be disabled via a command line option. It is also possible to build a linker with the warnings disabled, should that be necessary. * The ELF linker now supports a --package-metadata option that allows embedding a JSON payload in accordance to the Package Metadata specification. * In linker scripts it is now possible to use TYPE= in an output section description to set the section type value. * The objdump program now supports coloured/colored syntax highlighting of its disassembler output for some architectures. (Currently: AVR, RiscV, s390, x86, x86_64). * The nm program now supports a --no-weak/-W option to make it ignore weak symbols. * The readelf and objdump programs now support a -wE option to prevent them from attempting to access debuginfod servers when following links. * The objcopy program's --weaken, --weaken-symbol, and - -weaken-symbols options now works with unique symbols as well. - Rebase binutils-compat-old-behaviour.diff, binutils-revert-hlasm-insns.diff, binutils-revert-plt32-in-branches.diff and remove binutils-2.38-branch.diff.gz. - For now use --disable-gprofng. - Includes fixes for these CVEs: bnc#1142579 aka CVE-2019-1010204 aka PR23765(Fake entry from SLE for tracking purposes:) - For building shim 15.6~rc1 (and later versions) aarch64 image, objcopy needs to support efi-app-aarch64 target. (bsc#1198458) Adds binutils-add-efi-aarch64-1.diff, binutils-add-efi-aarch64-2.diff, binutils-add-efi-aarch64-3.diff .- Use https for variosu links.- Update binutils-2.38-branch.diff.gz (to 93054037f1e304e) in order to include PR29087.- Enable multitarget build on riscv64 - On SLE15 and later, use make -Oline to synchronize configure output by lines(Fake entry from SLE for tracking purposes:) - Add binutils-fix-keepdebug.diff for fix bsc#1191908, a problem in crash not accepting some of our .ko.debug files.- Renumber Sources.- Fix ExcludeArch for ppc.- Make multibuild utilize only the main binutils.spec file. - Remove not needed README.First-for.SUSE.packagers, pre_checkin.sh.- Start using _multibuild for cross binutils.- Add binutils-revert-rela.diff to revert back to old behaviour of not ignoring the in-section content of to be relocated fields on x86-64, even though that's a RELA architecture. Compatibility with buggy object files generated by old tools. [bsc#1198422] (forward port from SLE)- Update binutils-2.38-branch.diff.gz (to c210342d7f5) to include recognition of 'z16' name for 'arch14' on s390. [bsc#1198237](Fake entry from SLE for tracking purposes:) - Add binutils-add-z16-name.diff so that the now official name z16 for arch14 is recognized. [bsc#1198237]- Add usage of a SUSE_ZNOW environment variable which allows switching on "-z now" by default using "export SUSE_ZNOW=1", similar to the SUSE_ASNEEDED variable. Adds binutils-znow.patch.- Update binutils-skip-rpaths.patch: add back fix for boo#1191473, which got lost in the update to 2.38.- Update binutils-2.38-branch.diff.gz in order to include PR28879.- From Stefan Brüns : * Install symlinks for all target specific tools on arm-eabi-none [bsc#1185712]- Do not re-generate ld/ldlex.c, ld/ldgram.c, ld/ldgram.h and verify that corresponding flex/bison files are not modified by a patch.- Use verbose mode for make for cross compilers.- Make it build on SLE-11 again.- Use verbose mode for make.- Update to binutils 2.38: * elfedit: Add --output-abiversion option to update ABIVERSION. * Add support for the LoongArch instruction set. * Tools which display symbols or strings (readelf, strings, nm, objdump) have a new command line option which controls how unicode characters are handled. By default they are treated as normal for the tool. Using - -unicode=locale will display them according to the current locale. Using --unicode=hex will display them as hex byte values, whilst - -unicode=escape will display them as escape sequences. In addition using --unicode=highlight will display them as unicode escape sequences highlighted in red (if supported by the output device). * readelf -r dumps RELR relative relocations now. * Support for efi-app-aarch64, efi-rtdrv-aarch64 and efi-bsdrv-aarch64 has been added to objcopy in order to enable UEFI development using binutils. * ar: Add --thin for creating thin archives. -T is a deprecated alias without diagnostics. In many ar implementations -T has a different meaning, as specified by X/Open System Interface. * Add support for AArch64 system registers that were missing in previous releases. * Add support for the LoongArch instruction set. * Add a command-line option, -muse-unaligned-vector-move, for x86 target to encode aligned vector move as unaligned vector move. * Add support for Cortex-R52+ for Arm. * Add support for Cortex-A510, Cortex-A710, Cortex-X2 for AArch64. * Add support for Cortex-A710 for Arm. * Add support for Scalable Matrix Extension (SME) for AArch64. * The --multibyte-handling=[allow|warn|warn-sym-only] option tells the assembler what to when it encoutners multibyte characters in the input. The default is to allow them. Setting the option to "warn" will generate a warning message whenever any multibyte character is encountered. Using the option to "warn-sym-only" will make the assembler generate a warning whenever a symbol is defined containing multibyte characters. (References to undefined symbols will not generate warnings). * Outputs of .ds.x directive and .tfloat directive with hex input from x86 assembler have been reduced from 12 bytes to 10 bytes to match the output of .tfloat directive. * Add support for 'armv8.8-a', 'armv9-a', 'armv9.1-a', 'armv9.2-a' and 'armv9.3-a' for -march in AArch64 GAS. * Add support for 'armv8.7-a', 'armv8.8-a', 'armv9-a', 'armv9.1-a', 'armv9.2-a' and 'armv9.3-a' for -march in Arm GAS. * Add support for Intel AVX512_FP16 instructions. * Add -z pack-relative-relocs/-z no pack-relative-relocs to x86 ELF linker to pack relative relocations in the DT_RELR section. * Add support for the LoongArch architecture. * Add -z indirect-extern-access/-z noindirect-extern-access to x86 ELF linker to control canonical function pointers and copy relocation. * Add --max-cache-size=SIZE to set the the maximum cache size to SIZE bytes. - Add binutils-2.38-branch.diff.gz. - Removed deletion of man pages as they should be properly packages in tarball. - Rebased patches: aarch64-common-pagesize.patch, add-ulp-section.diff, binutils-bfd_h.patch, binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff, binutils-skip-rpaths.patch and binutils-compat-old-behaviour.diff.- Enable PRU architecture for AM335x CPU (Beagle Bone Black board)- use fdupes on datadir - remove RPM_BUILD_ROOT usage and other cleanups- Rebase binutils-2.37-branch.diff: fixes PR28494.- Add binutils-revert-hlasm-insns.diff for compatibility on old code stream that expect 'brcl 0,label' to not be disassembled as 'jgnop label' on s390x. [bsc#1192267]- Rebase binutils-2.37-branch.diff: fixes PR28523 aka boo#1188941.- Fix empty man-pages from broken release tarball [PR28144].- Update binutils-skip-rpaths.patch with contained a memory corruption (boo#1191473).- Configure with --disable-x86-used-note on old code streams. - Disable libalternatives temporarily for build cycle reasons. - make TARGET-bfd=headers again, we patch bfd-in.h - This state submitted to SLE12 and SLE15 code streams for annual toolchain update. [jsc#PM-2767, jsc#SLE-21561, jsc#SLE-19618] - Bump binutils-2.37-branch.diff to 66d5c7003, to include fixes for PR28422, PR28192, PR28391. Also adds some s390x arch14 instructions [jsc#SLE-18637].- Using libalternatives instead of update-alternatives.- Adjust for testsuite fails on older products that configure binutils in different ways, adds binutils-compat-old-behaviour.diff and adjusts binutils-revert-nm-symversion.diff and binutils-revert-plt32-in-branches.diff.- Bump binutils-2.37-branch.diff: fixes PR28138.- Use LTO & PGO build.- Update to binutils 2.37: * The GNU Binutils sources now requires a C99 compiler and library to build. * Support for the arm-symbianelf format has been removed. * Support for Realm Management Extension (RME) for AArch64 has been added. * A new linker option '-z report-relative-reloc' for x86 ELF targets has been added to report dynamic relative relocations. * A new linker option '-z start-stop-gc' has been added to disable special treatment of __start_*/__stop_* references when - -gc-sections. * A new linker options '-Bno-symbolic' has been added which will cancel the '-Bsymbolic' and '-Bsymbolic-functions' options. * The readelf tool has a new command line option which can be used to specify how the numeric values of symbols are reported. - -sym-base=0|8|10|16 tells readelf to display the values in base 8, base 10 or base 16. A sym base of 0 represents the default action of displaying values under 10000 in base 10 and values above that in base 16. * A new format has been added to the nm program. Specifying '--format=just-symbols' (or just using -j) will tell the program to only display symbol names and nothing else. * A new command line option '--keep-section-symbols' has been added to objcopy and strip. This stops the removal of unused section symbols when the file is copied. Removing these symbols saves space, but sometimes they are needed by other tools. * The '--weaken', '--weaken-symbol' and '--weaken-symbols' options supported by objcopy now make undefined symbols weak on targets that support weak symbols. * Readelf and objdump can now display and use the contents of .debug_sup sections. * Readelf and objdump will now follow links to separate debug info files by default. This behaviour can be stopped via the use of the new '-wN' or '--debug-dump=no-follow-links' options for readelf and the '-WN' or '--dwarf=no-follow-links' options for objdump. Also the old behaviour can be restored by the use of the '--enable-follow-debug-links=no' configure time option. The semantics of the =follow-links option have also been slightly changed. When enabled, the option allows for the loading of symbol tables and string tables from the separate files which can be used to enhance the information displayed when dumping other sections, but it does not automatically imply that information from the separate files should be displayed. If other debug section display options are also enabled (eg '--debug-dump=info') then the contents of matching sections in both the main file and the separate debuginfo file *will* be displayed. This is because in most cases the debug section will only be present in one of the files. If however non-debug section display options are enabled (eg '--sections') then the contents of matching parts of the separate debuginfo file will *not* be displayed. This is because in most cases the user probably only wanted to load the symbol information from the separate debuginfo file. In order to change this behaviour a new command line option --process-links can be used. This will allow di0pslay options to applied to both the main file and any separate debuginfo files. * Nm has a new command line option: '--quiet'. This suppresses "no symbols" diagnostic. - Includes fixes for these CVEs: bnc#1181452 aka CVE-2021-20197 aka PR26945 bnc#1183511 aka CVE-2021-20284 aka PR26931 bnc#1184519 aka CVE-2021-20294 aka PR26929 bnc#1184620 aka CVE-2021-3487 aka PR26946 bnc#1184794 aka CVE-2020-35448 aka PR26574 - Also fixes: bsc#1183909 - slow performance of stripping some binaries - Rebased patches: binutils-build-as-needed.diff, binutils-fix-abierrormsg.diff, binutils-fix-invalid-op-errata.diff, binutils-fix-relax.diff, binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff - Removed patches (are in upstream): ppc-ensure-undef-dynamic-weak-undefined.patch and ppc-use-local-plt.patch. - Add binutils-2.37-branch.diff.gz.- ppc-ensure-undef-dynamic-weak-undefined.patch: PPC: ensure_undef_dynamic on weak undef only in plt - ppc-use-local-plt.patch: PowerPC use_local_plt (prerequisite for above patch)- Update 2.36 branch diff which fixes PR27587.- Do not run make TARGET-bfd=headers separately.- Bump 2.36 branch diff (includes fix for PR27441 aka bsc#1182252).- Bump 2.36 branch diff.- Update 2.36 branch diff which should fix PR27311 completely. It fixes also PR27284. - Remove temporary fix 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.- Add temporary upstream fix for PR27311 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.- Update to binutils 2.36: New features in the Assembler: General: * When setting the link order attribute of ELF sections, it is now possible to use a numeric section index instead of symbol name. * Added a .nop directive to generate a single no-op instruction in a target neutral manner. This instruction does have an effect on DWARF line number generation, if that is active. * Removed --reduce-memory-overheads and --hash-size as gas now uses hash tables that can be expand and shrink automatically. X86/x86_64: * Add support for AVX VNNI, HRESET, UINTR, TDX, AMX and Key Locker instructions. * Support non-absolute segment values for lcall and ljmp. * Add {disp16} pseudo prefix to x86 assembler. * Configure with --enable-x86-used-note by default for Linux/x86. ARM/AArch64: * Add support for Cortex-A78, Cortex-A78AE and Cortex-X1, Cortex-R82, Neoverse V1, and Neoverse N2 cores. * Add support for ETMv4 (Embedded Trace Macrocell), ETE (Embedded Trace Extension), TRBE (Trace Buffer Extension), CSRE (Call Stack Recorder Extension) and BRBE (Branch Record Buffer Extension) system registers. * Add support for Armv8-R and Armv8.7-A ISA extensions. * Add support for DSB memory nXS barrier, WFET and WFIT instruction for Armv8.7. * Add support for +csre feature for -march. Add CSR PDEC instruction for CSRE feature in AArch64. * Add support for +flagm feature for -march in Armv8.4 AArch64. * Add support for +ls64 feature for -march in Armv8.7 AArch64. Add atomic 64-byte load/store instructions for this feature. * Add support for +pauth (Pointer Authentication) feature for - march in AArch64. New features in the Linker: * Add --error-handling-script= command line option to allow a helper script to be invoked when an undefined symbol or a missing library is encountered. This option can be suppressed via the configure time switch: --enable-error-handling-script=no. * Add -z x86-64-{baseline|v[234]} to the x86 ELF linker to mark x86-64-{baseline|v[234]} ISA level as needed. * Add -z unique-symbol to avoid duplicated local symbol names. * The creation of PE format DLLs now defaults to using a more secure set of DLL characteristics. * The linker now deduplicates the types in .ctf sections. The new command-line option --ctf-share-types describes how to do this: its default value, share-unconflicted, produces the most compact output. * The linker now omits the "variable section" from .ctf sections by default, saving space. This is almost certainly what you want unless you are working on a project that has its own analogue of symbol tables that are not reflected in the ELF symtabs. New features in other binary tools: * The ar tool's previously unused l modifier is now used for specifying dependencies of a static library. The arguments of this option (or --record-libdeps long form option) will be stored verbatim in the __.LIBDEP member of the archive, which the linker may read at link time. * Readelf can now display the contents of LTO symbol table sections when asked to do so via the --lto-syms command line option. * Readelf now accepts the -C command line option to enable the demangling of symbol names. In addition the --demangle=