fwupd-devel-1.7.3-150400.3.5.1<>,d?p9|94jOFi[Dc`Ӟzݨb@o%q2UjQrUI͝x}^SPpi*d@X$!&喤Q we^{VsR wX'_j>^ Ρ3VaK;DYVQP1\項nrB>SxoGKOoV>/+XZɑ2>>?d ! R% ;[nt|    'c (*,/2/T1`113(383[95d[:<#[F~G~H$I0XY\]^U bAcdjeofrltuvwxy(zCfwupd-devel1.7.3150400.3.5.1Allow session software to update device firmwarefwupd is a daemon to allows session software to update device firmware on the local machine.d?mourvedreKbSUSE Linux Enterprise 15SUSE LLC GPL-2.0-or-later AND LGPL-2.1-or-laterhttps://www.suse.com/Development/Languages/C and C++https://fwupd.org/linuxppc64le>r g 5r Fd'H*[9 RX'Z`m mJ!s} Xs8 k=.w Q . 0 a &".;QH594Wޣ[/ libfwupdplugin5)- Update to version 1.7.2: * This release adds the following features: + Add a new HSI check that PCR registers 0-7 are not empty + Add several compile flags to reduce the install size by over 300Kb + Allow overriding HwId data from the daemon.conf config file + Allow overriding the firmware GType from a quirk file + Export the component release ID over DBus + Remove support for the SoloKey and ChaosKey devices + Show a daemon warning if quirk flags are malformed + Speed up the daemon startup by ~40% by doing less at startup * This release fixes the following bugs: + Be case insensitive when fixing the device model + Fix a critial warning in ccgx found by the fuzzer + Fix a DFU crash if the attach failed due to a hardware fault + Fix a Redfish crash when specifying a URL without a port + Fix CLI downloads when using fwupdmgr --ipfs + Fix critical warning when /etc/machine-id does not exist + Inhibit thunderbolt devices to correctly use UPDATABLE_HIDDEN + Set SSL_VERIFYHOST=0 when using Redfish to fix OpenBMC auth + Skip UEFI devices that fail coldplug * This release adds support for the following hardware: All exported MTD block devices - Changes from version 1.7.1: * This release adds the following features: + Allow specifying 'fwupdmgr device-test foo --json' for unattended testing + Allow using a filename when using set-approved-firmware + Inhibit ModemManager device in mbim-qdu + Share the Common Flash Memory Interface quirks between plugins + Show changes in HSI attributes when using 'fwupdmgr security' + Show the user a warning if updating may affect full-disk-encryption + Show translated firmware release notes when provided + Support loading remotes from /var/lib/fwupd/remotes.d * This release fixes the following bugs: + Fix a CCGX regression when loading firmware + Fix a potential crash when dumping Parade devices + Fix build error when sys/io.h is not available + Fix building the Synaptics RMI self tests on s390x + Fix the CSME CVE detection for new generations + Handle EPERM when running the self tests on systems with IPMI + Mark as SUPPORTED even if on battery power + Only save the HSI attributes to the database if different + Raise the client timeout value from 25 seconds to fix Redfish startup + Redirect the old HSI links to the correct place + Relax the ITE SuperIO signature checks for new hardware support + Set device time and timezone for logitech bulkcontroller devices + Set the verfmt of the returned device when the daemon device is unset * This release adds support for the following hardware: + Dell Atomic Dock + HP Thunderbolt Dock G4 + More PixArt devices + Steelseries Stratus + Wacom 3rd-gen Intuos BT - Changes from version 1.7.0: * This release adds the following features: + Add FuCfuPayload and FuCfuOffer for future usage + Add support for an 'unreachable' device flag + Add support for Logitech devices supporting the Unified Battery feature + Allow adding GUIDs to each HSI security attribute + Allow installing the LVFS remote, but with it disabled by default + Convert security attributes to JSON and write then to the database + Convert the device test script to a fwupdmgr subcommand + Create Redfish user accounts automatically using IPMI + Use an interactive request to restart some Logitech DFU devices * This release fixes the following bugs: + Abort on invalid SREC files early to avoid a fuzzing timeout + Allow using interrupt transfers for HID devices + Allow waiting for multiple devices to replug + Fix a critical warning on a Unifying flash failure + Fix a regression in flashing the Dell dock + Fix Thunderbolt host controller probing + Forcefully set checksums found in cabinet files to lowercase + Force UX-capsule over full size BGRT + Make the SuperIO ports and timeouts specific to the DMI model + Only probe SynapticsMST devices that have opted-in + Remove support for --ignore-power as it did not work for UEFI firmware + Reset the CMOS as required when changing system firmware branch + Restart the daemon if any of the the plugin config files are modified + Show HSiLevel=0 attributes in JSON security output + Update the child composite ID if the parent changes + Use a per-device global percentage completion + Write the BMP image upside down to avoid using a negative bitmap height * This release adds support for the following hardware: + A huge number of Synaptics CAPE devices + Elan fingerprint readers + Logitech Bolt peripherals, receivers and radio hardware + Logitech devices supporting the bulk controller protocol + More supported PixArt devices + More supported StarBook coreboot devices + Union Point SPI hardware - Add pkgconfig(libprotobuf-c) and pkgconfig(protobuf) BuildRequires: New dependencies. - Refresh patches with quilt. - Drop sub-package fwupdtpmevlog, no longer built. - Update URL in _service, new home.- Update to version 1.6.4: * Allow overriding the quirks directory at runtime * Fix a regression in flashing the Dell dock * Fix probing the Dell TPM * Show HSiLevel=0 attributes in JSON security output * Abort on invalid SREC files early to avoid a fuzzing timeout * This release adds support for the following hardware: + AVer ATLAS CAM/CAM520 Pro2 + Cayenne/Spyder Synaptics MST + VL819 USB devices - Changes from version 1.6.3: * This release adds the following features: Fall back to the parent if the child does not have a battery level set * This release fixes the following bugs: + Disable the uefi_capsule plugin if Redfish coldplug succeeded + Fix an elantp crash when starting the daemon + Fix compiling with old versions of libxmlb + Fix detection of 8Bitdo wireless usb adapter + Fix the 8bitdo N30 Pro 2 install duration + Fix the modem-manager report that failed to get device after update + Fix writing large redfish firmware files * This release adds support for the following hardware: + Poly Studio P21 + Realtek RTD2141B - Switch service to obs_scm, and recompress to buildtime. - Drop automatic changesgenerate, upstream have perfectly fine and human understandable release notes at https://github.com/fwupd/fwupd/releases that should be copied into .changes.- Add requires to udisks2 for dbxtool update. (bnc#1192344)- If the machine we install onto has shim installed, it is likely an EFI based system. Require fwupd-efi in this case (boo#1192206).- Require libfwupdplugin2 by the -devel package: the -devel package installs the .so symlink, thus we must guarantee the target library to be present.- Added hardening to systemd service(s) (bsc#1181400). Added patch(es): * harden_fwupd-offline-update.service.patch * harden_fwupd-refresh.service.patch- Update to version 1.6.2 - The fwupd efi program be separated to fwupd-efi package. - Removed pesign-obs-integration, moved needssslcertforbuild , SBAT and EFI signing stuff to fwupd-efi. - Moved libfwupdplugin1 to libfwupdplugin2 - Change log from upstream: https://github.com/fwupd/fwupd/blob/main/data/org.freedesktop.fwupd.metainfo.xml - This release adds the following features: * Add a plugin to check Lenovo firmware settings * Add initial support for the powerd daemon * Add support for CapsuleOnDisk * Add support for installing UEFI updates from GRUB * Add support for soft-requirements that can be ignored with --force * Allow devices to only accept version upgrades * Allow discovery of Redfish BMCs specified by VID-PID or MAC * Allow the daemon to request interactive action from the end user * Automatically connect the BMC network interface at startup * Show the build timestamp if set on the device * Show the user how to switch out of Wacom tablet Android-mode - This release fixes the following bugs: * Add the alternate vendor name into the 8BitDo allowlist * Allow multiple devices to set WAIT_FOR_REPLUG * Allow the client to watch for more property changes * Always ensure the SuperIO version string is NUL terminated * Automatically clear the update error as required * Disable all UX capsules for Lenovo hardware * Do not assume the metainfo file is NUL-terminated * Do not save invalid files on LVFS server error * Fix a VLI regression in enumerating the PD device * Fix a VLI regression when installing VL820Q7 firmware * Fix enumeration of the Synaptics Prometheus config child * Fix parsing Redfish USB/PCI network VID/PIDs * Fix the fwupdmgr progressbar spinner to actually work * Fix version number for legacy Wacom Bluetooth modules * Ignore virtual M.2 ATA devices * Preserve NEEDS_REBOOT on successful update * Prevent a corrupt PHAT table from allocating lots of memory * Read the Redfish SMBIOS table when required * Remove the vendor string from the device name where required * Save the update state to the database correctly all of the time * Switch from sysctl to ioctl for ESRT on FreeBSD * Try reading from /sys/class/dmi if SMBIOS direct access fails * Watch for children added or removed after setup has been completed * Work around a XCC-ism on Lenovo hardware - This release adds support for the following hardware: * ModemManager devices supporting Firehose or MBIM QDU * More models of RTS54HUB * More Poly DFU devices * Parade LSPCON * PixArt receiver and wireless hardware * Realtek MST with RTD2142 * SuperIO IT5570 * USB4 Dell dock- Remove valgrind from BuildRequires since it's not a hard requirement anymore. (bsc#1184248)- Update to version 1.5.8: New features: * Add a new internal flag to opt-in to GUID matching * Add D501 Baklava device support * Add fu_device_set_battery_level() * Add missing uint64 read and write helpers * Add Qubes wrapper source and create packages * Allow enabling plugins only matching a specific HwId * Prompt for unlock keypress if reset command is blocked * Remove obsolete dell-dock non-passive update flow support * Remove the Hughski public key * Show a warning when parsing invalid quirk files * Support for GATT characteristic signals/notifications * Support more than one protocol for a given device Fixes: * Align the CCGX DMC firmware to 64 byte chunks * Be more strict for custom quirk keys * Check pixart firmware compatibility with hardware before flashing * Correct a thunderbolt assertion if kernel failed FW read * Correctly erase STM32 devices when transfer size is less than sector size * Detect SREC overflow to avoid adding ~4GB of 0xFF padding * Do not show a critical error when flashing footer-less binary files * Don't allow device updates while needing activation * Fix a regression in the elantp defined IAP start address * Fix a regression where activate stopped working * Fix firmware update of pointing device on Lenovo ThinkPad Nano * Fix the HSI plugin 'Disabled' state * Fix the quirk key name for the Lenovo HDMI with power * Fix writing to the GD32VF103 bootloader * Only call elantp->detach() when writing a firmware blob * Updated StarLabs GUIDs * Wait a few ms for the Logitech hardware to settle after detach - Remove GPG-KEY-Hughski-Limited from the filelist - Drop upstreamed patch + fwupd-bsc1182057-fix-sbat-section-copy.patch- Add fwupd-bsc1182057-fix-sbat-section-copy.patch to set the proper section flags for .sbat section so that objcopy can copy it into fwupd*.efi (bsc#1182057)- Update to version 1.5.7: New features: * Add initial support for Bluez bluetooth devices * Add more supported pixart devices * Add support for the RTD21xx HDMI converter Fixes * Convert MBR types to GPT GUIDs to help find the ESP * Do not allow updating a synaptics-mst device with no customer ID * Drop unused heap pages after startup has completed * Ensure SBAT metadata is added correctly * Move the plugin build logic to the plugins themselves * Only allow verify-update for plugins that support CAN_VERIFY - Specify SBAT metadata for openSUSE/SLE (bsc#1182057) - Adjust the meson options + plugin_uefi => plugin_uefi_capsule and plugin_uefi_pk + plugin_synaptics => plugin_synaptics_mst and plugin_synaptics_rmi + Disable Intel AMT plugin in non-x86 systems- Update to 1.5.6: New features: * Add SBAT metadata to the fwupd EFI binary * Add support for GD32VF103 as found in the Longan Nano * Add support for RMI PS2 devices * Add support for the System76 Keyboard * Allow downloading firmware from IPFS * Install the UX data into a single .tar.xz file * Add a plugin to update PixArt RF devices * Add new hardware to use the elantp and rts54hid plugins * Allow specifying more than one VendorID for a device * Detect the AMD TSME encryption state for HSI-4 * Detect the AMI PK test key is not installed for HSI-1 * Add Maple Ridge Thunderbolt firmware parsing support * Add --no-remote-check to ignore checking for download remotes * Allow creating FMAP and Synaptics firmware using builder.xml Fixes: * Add support for the Starlabs LabTop L4 * Allow using an external ESP again * Ask the user to reboot when required if downgrading * Be more paranoid when parsing ASCII buffers and devices * Check if the fwupd BootXXXX entry exists on failure * Clear the pending flag if restarting the system * Do not allow flashing using flashrom if BLE is enabled * Do not allow Lenovo hardware to install multiple capsules * Do not parse the OptionROM image * Do not show Unknown [***] for every client connection * Fix dnload wBlockNum wraparound for ST devices * Fix OOM when using large ArchiveSizeMax values * Fix several crashes spotted by AddressSanitizer * Fix several places where the Goodix MOC plugin could crash * Include the PCR0 to the report metadata * Report the lockdown status from UEFI and SuperIO plugins * Show a console warning if the system clock is not set * Fix flashing a fingerprint reader that is in use * Fix several critical warnings when parsing invalid firmware * Fix updating DFU devices that use DNLOAD_BUSY * Ignore the legacy UEFI OVMF dummy GUID * Make libfwupd more thread safe to fix a crash in gnome-software * Never show unprintable chars from invalid firmware in the logs * Allow using fwupdtool as non-root for firmware commands * Do not trust the Block.HintSystem boolean for ESP filtering * Fix a memory leak when parsing Synaptics firmware * Fix a possible crash when reading the Goodix MOC USB request * Fix crashes when parsing invalid FMAP, DMC, Solokey and Synaptics images - Deprecate fwupd-bsc1179790-disable-hintsystem.patch- Add fwupd-bsc1179790-disable-hintsystem.patch to remove Block.HintSystem from ESP filtering (bsc#1179790)- Update to version 1.5.3: + Lower the CURL version required to fix build in RHEL + Do not use meson ternary operations to avoid bumping the required meson version + Added Lite Mk III + Allow setting the GMainContext when used for sync methods + Fall back to the misc device for serio devices + Actually implement rescan in FuUdevDevice + bcm57xx: Refactor CRC code to remove extra byteswap + bcm57xx: Fix CRC check + synaptics-rmi: Don't crash if calling ->to_string() before - >setup() + Fix a possible critical warning due to missing retval + Add the serio->firmare_id for UDev devices + Export the driver name from FuUdevDevice + Allow the client to send PKCS7 and GPG signatures + Force the remote kind to JCat server-side + Only parse the signature if the remote is JCat + fu-main: Fix sender_features insert with wrong size + make platform integrity plugin optional and disabled by default + Add quirk for Western Digital + Mark more user-visible strings as translatable + modem-manager: validate firmware update method combinations + modem-manager: remove unused byte counts in QMI/PDC update logic + modem-manager: make sure the correct interface number is used for QMI + modem-manager: udev monitoring only if device switches layout + modem-manager: plug udev client leak + Restrict loading component types of firmware - Enable supported_build to clarify that this package is supported (bsc#1179790) - Drop fwupd-platform-integrity.conf since upstream disables the platform integrity module by default now due to incompleteness. - Address fwupd-refresh.service in %preun, %pre, %post, and %postun and provide a rc link for it - Version "Obsoletes: dbxtool" and "Obsoletes: fwupdate"- Update to version 1.5.2: + ata: Add OUI quirk for Toshiba + libfwupd: Restore recognizing gpg and pkcs7 types still + Register the SoupSession gtype when required + Switch from libsoup to libcurl + Fix sync method when called from threads without a context + Move ABI check to Github actions + Enable github workflows + libfwupd: Add fwupd_client_download_file() + libfwupd: Add fwupd_client_get_user_agent() + Only download the remote metadata as required + Add breaks for fwupdate 12-7 (Closes: #960688) + Install modules-load configs in the correct directory + vli: Do not be clever replugging the MSP430 device + vli: Make some trivial debugging more specific to help debug an issue + make gcab optional + Fall back to FAT32 internal partitions for detecting ESP + Add a flag to indicate if packages are supported + uefi: a new option for uefi configuration to use UEFI removable path + Add a section to man page on scripting + synaptics-mst: Improve reliability by waiting 2 seconds after writing data + hailuck: Add an plugin for the Pinebook Pro laptop + Allow setting global flags for FuHidDevice + Set the SMBIOS chassis type to portable if a DT battery exists + colorhug: Don't set the version format to triplet at startup + Allow components to set the icon from the metadata + colorhug: Fix detection of version on older firmware versions + bcm57xx: Fix reading vendor/device ids from firmware. + Remove HSI update and attestation suffixes + trivial: make dbxtool executable to fix snap build + Ignore an invalid vendor-id when adding releases for display + Notify the service manager when idle-quitting - Refresh fwupd-bsc1130056-change-shim-path.patch - Changes in BuildRequires: + Replace pkgconfig(libsoup-2.4) with pkgconfig(libcurl) + Replace pkgconfig(systemd) with pkgconfig(libsystemd) - fwupd-msr.conf and fwupd-platform-integrity.conf are moved to %{_modulesloaddir}.- Obsoletes and Provides dbxtool since fwupd 1.5.0+ now embeds dbxtool in the dbxtool plugin- Amend the spec file (jsc#SLE-16818) + Only enable fish support for Tumbleweed + Only enable the MSR plugin for x86 + Only install dbxtool in the architectures with UEFI support- Update to version 1.5.1: + Use UDisks to find out if swap devices are encrypted. + Show a link to discover more information about a specific plugin failure. + updated fish completions to 1.5.0. + Remove the duplicate parent-child data in FwupdDevice and FuDevice. + Show a less scary fwupdate output for devices without info. + thunderbolt: recognize authorized value of '2' as well. + bcm57xx: Make hotplug more reliable. + Use a different Device ID for the OptionROM devices. + contrib/ci: switch TPM simulator from ibmswtpm to swtpm. + Delete unused EFI variables when deploying firmware. + Fix probe warning for the Logitech Unifying device. + Include the amount of NVRAM size in use in the LVFS failure report. + Add external interface messages.- Update to version 1.5.0: + Add a compatible re-implementation of the rhboot dbxtool. + Add async versions of the library for GUI tools. + Add commands for interacting with the ESP to fwupdtool. + Add firmware-extract subcommand to fwupdtool. + Add FwupdPlugin so we can convey enumerated system errors to the end user. + Add plugin for Goodix fingerprint sensors. + Add plugin that can update the BCM5719 network adapter. + Add plugin to update Elan Touchpads using HID. + Add support for a delayed activation flow for Thunderbolt. + Add support for ChromeOS Quiche and Gingerbread. + Add support for Hyper hardware. + Add support for the Host Security ID. + Add support for ThunderBolt retimers. + Add switch-branch command to fwupdtool and fwupdmgr. + Allow blocking specific firmware releases by checksum. + Allow contructing a firmware with multiple images. + Allow firmware to require specific features from front-end clients. + Allow updating the dbx using the LVFS, validating it is safe to apply. + Include the HSI results and attributes in the uploaded report. + Support loading DMI data from DT systems. + Support LVFS::UpdateImage for GUI clients.- Add fwupd-jscSLE-11766-close-efidir-leap-gap.patch: Set SLE and openSUSE esp os dir at runtime (jsc#SLE-11766) - Drop _multibuild and build option -Defi_os_dir="%{efidir}": with the above patch fwupd can detect esp os dir dynamically - Update the efidir related %post and %postun scripts in spec file- Update to version 1.4.5: * Add XB_QUERY_FLAG_FORCE_NODE_CACHE * Add support for a delayed activation flow for Thunderbolt * Allow firmware to require specific features from front-end clients * Allow multi-byte FuUdevDevice preads and writes * Be more defensive when remotes are missing required keys * Disable the SQLite lookaside cache * ccgx: Add more hybrid dock support * ccgx: Modify readme to remove customer info * ccgx: add new protocol for dmc dock * ccgx: remove verify flag in plugin * modem-manager: read the vendor ID directly from sysfs attribute Fixes: #2209 * thelio-io: Add the DFU instance ID as a counterpart only * thunderbolt: Add a new subclassed thunderbolt firmware update type * thunderbolt: Allow quirks to skip the authentication step * thunderbolt: drop support for force power * tpm-eventlog: fix PCR0 calculation * uefi: check for free space after cleaning up ESP * vli: Add dual-image feature for VL103 backup firmware * vli: Add the project ID shared SPI PD controllers * vli: Allow chained usb hub devices where the parent needs GPIOB reset * vli: Do not modify the class vfuncs depending on device type * vli: Do not use GUID matching for the MSP device * vli: Rename FuVliUsbhubI2cDevice to FuVliUsbhubMsp430Device * vli: Set FuQuirks on the shared SPI object * vli: Set the i2c instance IDs in probe() * vli: Use the GPIOB reset for the MiniDock VL103 * vli: Wait for the root device to be replugged when updating the MSP430- Update to version 1.4.4: * Release fwupd 1.4.4 * Fix regression when checking for downgraded metadata- Update to version 1.4.3: * Release fwupd 1.4.3 * ata: A OUI quirk for Kingston * ccgx: Fix a potential division by zero * Check the device requirements when returning from GetDetails * fu-engine: Allow --plugin-whitelist to use dashes instead of underscores * Always enforce the metadata signature has a valid timestamp * ccgx: modify install duration for dmc device * ccgx: Add support for HP DMC dock devices * dell-dock: prevent updates to occur via synaptics-mst plugin * dell-dock: Capture the dock SKU in metadata * synaptics-prometheus: Force the minor version from 0x02 to 0x01 to make sure the devices can be updated back to 0x01. * Generate a body for github releases (Fixes: #2034)- Build the package separately for openSUSE and SLE using _multibuild (jsc#SLE-11744).- Update to version 1.4.2: * vli: Add no-guid-matching for all VLI devices * vli: Remove a copy-and-paste mistake * Add two OUI quirks * ata: Add WD OUI quirk 000cca * synaptics-rmi: Essentially blacklist Dell K12A * dfu: Avoid communicating when bitManifestationTolerant is off * ata: Add OUI quirk for Western Digital * dfu: Support MATEKF722SE quirk * Fix various build issues with -Wdiscarded-qualifiers * thunderbolt/dell-dock: Delay activation for Thunderbolt updates * Switch the default of EnumerateAllDevices to false * Add OUI quirk for SanDisk * vli: Add two standard USB instance IDs for shared-PD devices * vli: Use GPIOB to reset the VL817 found in two Lenovo products * tpm-eventlog: Correct the display of final calculated PCRs * wacom-raw: fixup switching to bootloader mode- Update to version 1.4.1: * thunderbolt: Don't show safe mode errors for USB4 host controllers * ep963x: Various changes to make the plugin actually work on real hardware * Make tss2-esys conditional * ep963x: Remove some dead code spotted by Coverity * ccgx: Only update the FW2 partition of the ThinkPad USB-C Dock Gen2 * ccgx: Expand the FWImageType for future hardware * Allow specifying the device on the command line by GUID * Fix the DeviceID set by GetDetails * wacom-usb: Fix a theoretical buffer over-read to make GCC happy * vli: Only show the i2c devices on the USB3 hub * Allow devices to be updatable, but only when upgrading a proxy device * Reset the progressbar time estimate if the percentage is invalid * ccgx: Always report 100% when finished writing * Add a device quirk that forces an explicit device-id match * ccgx: Set the device name and summary from quirk files * vli: Only do the APP5 FW bug fix on affected hardware * vli: Show all the buffer when debugging with FWUPD_VLI_USBHUB_VERBOSE * fu-engine: Refresh device name and format before setting supported flag * Allow a device to set the logical or physical ID during ->setup() * ccgx: Split out a trivial helper to set the instance IDs * ccgx: Set the device name to be more useful * ccgx: Set the logical ID as the FwMode * ccgx: Split out a trivial function to set the version * ccgx: Do not reboot the device write after installing * ccgx: Do no show the flash parameters when unknown * Allow devices to match the proxy device by GUID * Do not skip attach() if the device is marked _WILL_DISAPPEAR * dell-dock: Port to using fu_device_get_proxy() * Allow adding a device 'proxy' device that can do actions on it * vli: Do not show the USB 2 recovery devices for USB 3 hubs * vli: Add metadata to identify which is the same physical device * uefi: correctly format firmware version of Dynabook (né Toshiba) X30, X40 and probably others * synaptics-cxaudio: Use the ->attach() device vfunc * synaptics-cxaudio: Wait for the device to reboot after writing firmware * logitech_hidpp: decrease verbosity of messages that hid++ ID is missing * Prefer to update the child first if the order is unspecified * Do not modify the device priority for child devices- Exclude fwupdate from the architectures without UEFI support.- Update to version 1.4.0: * Release fwupd 1.4.0 * Allow removing device flags from quirk files * Use black to format python source in a consistent manner * Define SOURCE_VERSION when building a package * Only set the parent when adopting children * Do not conditionalize attach() and detach() on IS_BOOTLOADER * Do not crash the daemon if a plugin does something dumb * wacom-usb: Add more sanity checks in case the daemon goes crazy * wacom-usb: Use a per-device cleanup function * Add some more device regression tests * wacom-usb: Add a lot of missing metadata about the devices * wacom-usb: Hide a lot of debugging behind FWUPD_WACOM_VERBOSE * Only auto-add counterpart GUIDs when required * ccgx: remove update message * ccgx: add parent guid for hybrid dock * ccgx: Use a smaller timeout for i2c read and write operations * ccgx: Retry the register read and write with a i2c reset * ccgx: Fix buffer overflow when reading out i2c status * ccgx: Retry the HID disconnect up to 5 times * ccgx: Show a better error message on failure * ccgx: Allow forcing firmware of the wrong app_type with fwupdtool * Modularize the hardware tests * Ignore indirect devices that replug during the composite firmware update * Export the device state as part of the D-Bus interface * Fix devices that use CounterpartGuid when more than one device is installed * Use the GUID as a fallback rather than the connection ID * ccgx: Fix critical warning on i2c write failure * logitech-hidpp: Do not add peripheral devices for receiver in BL mode * Install the installed-tests only if tests are enabled * Load the signature to get the aliased CDN-safe version of the metadata * vli: Only reboot the USB hub once * synaptics-cxaudio: Only use the PATCH2 address when the patch level is 2 * add STM32F745 stm dfuse quirk * dfu: Add a way to set the timeout from a quirk * Export the release urgency * Export the release creation time * Check the firmware requirements before adding SUPPORTED * data/motd/fwupd-refresh: Only order after network.target * ccgx: Do not add the HID device that will disconnect * ccgx: Use Silicon ID and Application type to set flash parameters * Add a new daemon configuration option to control EnumerateAllDevices * logitech_hidpp: set the bootloader protocol * Install meson from pip for LGTM * bash: add completion for fwupdtool reinstall * fu-tool: add reinstall command * fu-engine: export fu_engine_get_releases_for_device in header * vli: Wait for the VL103 to timeout to fix detach * ccgx: Show the UpdateMessage in the correct device mode * ccgx: Add extra instance IDs to match specific firmware * Use a static version number * thunderbolt: Rather than hardcoding to PCI slot numbers, use domain in GUID * Revert "thunderbolt: Create a unique GUID including Thunderbolt controller path" * dell-dock: Port to fu_device_retry() * nitrokey: Convert to use FuHidDevice * nitrokey: Port to fu_device_retry() * vli: Port to fu_device_retry() * Add fu_device_retry() helper functionality * ccgx: Implement writing firmware to flash * ccgx: Add i2c status check when reading or writing registers * ccgx: Add 5ms delay between read registers to avoid an i2c error * libfwupdplugin: Use fu_device_locker_close() * synaptics-mst: Use fu_device_locker_close() * Add fu_device_locker_close() * ccgx: Do not store the silicon ID in the image address * ccgx: Add device quirks for the Lenovo Hybrid Dock * ccgx: Switch HID mode to HPI mode at startup * ccgx: Clear the event queue when in startup * ccgx: Wait for hardware to settle when coming out of reset * ccgx: Do not mark the device as updatable when in boot mode * ccgx: Verify the firmware app type when preparing firmware * ccgx: Set the update message when running in backup firmware * ccgx: Read the FwAppType from the hardware * ccgx: Set the HPI version number for the current firmware * ccgx: Get the silicon ID to map the flash parameters * ccgx: Read the HPI device mode at startup * ccgx: Set up the HPI I²C config at startup * ccgx: Create devices when in HID and I2C modes * Add a new ChromeOS CI target to build without GPG and PKCS7 * Use Jcat files in firmware archives and for metadata - Removed fu-keyring-gpg which caused CVE-2020-10759 (boo#1172643) * csr: Allow truncated HID reads * vli: Only consider the high nibble when building the sub-version * csr: Parse the firmware as a DFU file * Add support for EP963x hardware * Add FuHidDevice abstraction * vli: Correctly attach VL103 after a firmware update * ccgx: Parse the metadata block in the firmware image * ccgx: Add a firmare parser for cyacd files * logitech: Correctly set the protocol * Add the optional device-id to the update --help output * Fix a difficult-to-trigger daemon hang when replugging devices * vli: Remove a dock device from the whitelist that is never going to be updated * vli: Add some trivial debugging to help track down a bug * vli: Never add USB hub devices that are not upgradable * uefi: Don't use shim for non-secure boot configurations * Start fwupd-activate.service after snapd.service * dfu: Actually reload the DFU device after upgrade has completed * dfu: Add one more m-stack device requiring a quirk * Apply version format to releases and devices at same time * Ensure that the DeviceID is set for child devices * Fix a daemon crash when removing children * Allow waiting for the parent device when replugging * Add fu_device_get_root() shared API * vli: Fix an error when detaching MSP430 * vli: Fix a critical warning when getting the USB speed * vli: Fix the error enum values for the MSP430 * Do not add blank lines when tokenizing Intel hex files * vli: Fix the version calculation for MSP430 * vli: Ignore one more error when attaching * vli: Always expect the VL103 header at 0x1003 or 0x4000 * vli: Do not fall back to the recovery write for usbhubs * vli: Only show the 2nd header if the device ID is valid * vli: Fix VL103 reboot from ROM mode to FW mode * vli: Add some better comments for writing GPIOs * Add a helper script to add a DFU header * Add 'firmware-convert' subcommand to fwupdtool * fu-engine: Make two passes of requirements checking * fu-engine: Copy the VersionFormat from the CAB if specified in `get-details` * Add a new plugin for CPU microcode * Don't build/install fwupdagent man page if agent build is not requested * Introduce a new VersionFormat for `hex` * Drop UEFI quirks we now inherit from metadata * ci: build Debian using libflashrom * When TPM PCR0 measurements fail, query if secure boot is available and enabled * fix fwupd.shutdown.in according to the movement of fwupdtool to bindir * ata: Add OUI quirk for Western Digital and Intel * improved fish shell completion * vli: Set the MSP430 version format to pair * Always return AppStream markup for remote agreements * ata: Add trivial OUI quirk for Micron * added completion script for fish shell * Do not fail loading in /etc/machine-id is not available * Use xb_builder_source_add_simple_adapter * Create FuCabinet and untangle a lot of legacy code * nvme: Do not try to handle integer version numbers * Allow server metadata to set the version format on some devices * fu-tool: Correctly append the release to devices in `get-details` * For the `get-details` command make sure to always show devices * fu-engine: Copy the version and format from donor device in get-details * fu-engine: Use unknown for version format by default on get-details * Inihbit all power management actions using logind when updating * Decouple the version format from the version itself * Add raw versions for bootloader and lowest * Allow server metadata to set the device name on some devices * Remove support for GCab less than v1.0 * fu-device-list: Check protocol before de-duping devices * Do not allow devices that have no vendor ID to be UPDATABLE * ata: Include a vendor ID for ATA hardware * ata: Switch off the verbose logging by default * Always check for PLAIN when doing vercmp() operations * Discard the reason upgrades aren't available (Fixes: #1678) * Improve the description of `fwupdtpmevlog` for man page * Move `fwupdtpmevlog` into `bindir` * uefi: Move `fwupdate` into `bindir` * Move `fwupdtool` and `fwupdagent` into `bindir` * Use the system provided flashrom on Fedora * Add a plugin vfunc to run after subclassed FuDevice creation * ci: use standalone script to generate build dependencies * Move the daemons from /usr/lib/fwupd to /usr/libexec/fwupd * Use the recently released flashrom v1.2 * Generate an additional UEFI quirk file using the stable LVFS metadata * uefi: Apply capsule update even with single valid capsule * Fix a critical warning when installing some firmware * ebitdo: Fix the endpoint address logged in the error message * uefi: Find the correct lds and crt name when specifying -Defi_ldsdir * upower: Move battery threshold declaration into a configuration file * upower: Decrease minimum battery requirement to 10% - Refresh fwupd-bsc1130056-change-shim-path.patch - Add new dependency: jcat- Update to version 1.3.9: * Release fwupd 1.3.9 * Always check for PLAIN when doing vercmp() operations * improved fish shell completion * vli: Set the MSP430 version format to pair * added completion script for fish shell * Always return AppStream markup for remote agreements * Do not fail loading in /etc/machine-id is not available * fu-engine: Fixup broken-ness from 0c0fada18fc9cb2a0efec351db67f0867bf045cd * Use xb_builder_source_add_simple_adapter * fu-tool: Correctly append the release to devices in `get-details` * For the `get-details` command make sure to always show devices * fu-engine: Copy the version and format from donor device in get-details * fu-engine: Use unknown for version format by default on get-details * Inihbit all power management actions using logind when updating * fu-device-list: Check protocol before de-duping devices * ata: Switch off the verbose logging by default * Discard the reason upgrades aren't available (Fixes: #1678) * Improve the description of `fwupdtpmevlog` for man page * Move `fwupdtpmevlog` into `bindir` * uefi: Move `fwupdate` into `bindir` * Move `fwupdtool` and `fwupdagent` into `bindir` * ci: use standalone script to generate build dependencies * Move the daemons from /usr/lib/fwupd to /usr/libexec/fwupd * Use the recently released flashrom v1.2 * uefi: Apply capsule update even with single valid capsule * Fix a critical warning when installing some firmware * ebitdo: Fix the endpoint address logged in the error message * fu-util: fix a logic error in report uploading introduced in e076d48afb74d1447936d353f12781755f13b047 * uefi: Find the correct lds and crt name when specifying -Defi_ldsdir * upower: Move battery threshold declaration into a configuration file * upower: Decrease minimum battery requirement to 10% - Update to version 1.3.8: * Release fwupd 1.3.8 * Do not use fu_common_vercmp() when the device verfmt is PLAIN * altos: Output raw buffer data when using FWUPD_ALTOS_VERBOSE * altos: Prefix an error to provide more context * altos: Add a trivial _to_string() implementation * synaptics-cxaudio: Make the verfmt match that of the existing Windows tools * synaptics-mst: Allow MST to fall back if no PCI device is marked as parent * Allow specifying a list of subsystems when setting a physical ID * synaptics-mst: Fix trivial thinko caused by the wrong dock connected * vli: Invert the logic to reboot the parent FuCliUsbhubDevice, not the child * vli: Switch around the hub tier values * uefi: Fix a build regression with Fedora 30 * logitech_hidpp: Ignore detach failures (Fixes: #1183) * logitech_hidpp: When detaching to bootloader use non-blocking IO and wait for timeout * vli: Show erase progress when doing a v2 recovery * uefi: Do not remove the 'Linux Firmware Updater' boot entry before update * uefi: Do not rewrite BootOrder in the EFI helper * vli: Add support for the PS186 device * Set up more parent devices for various Lenovo USB hubs * cxaudio: Set the update protocol to prevent a daemon warning * vli: Add support for Lenovo Modularized dock * Add an extra instance ID to disambiguate USB hubs * vli: Remove the unused tierX custom flags for each device * Revert "Correctly delete UEFI variables" * uefi: make debugging output more readable * vli: Fix a potential buffer-overflow when parsing firmware * tpm: Optimize the string parsing and fix the boolean logic * synaptics-rmi: Add a missing error enum value * synaptics-rmi: Correctly identify a checksum failure * synaptics-rmi: Fix Coverity issue that is impossible to hit in reality * solokeys: Parse old versions of the bootloader string * Add a plugin to update PD controllers by Fresco Logic * vli: Set the device progress correctly when erasing a PD device * vli: Use the correct command to get the device firmware version * vli: Correctly reset all VL100 devices * vli: Set all standalone PD devices to not do SPI auto-detection * vli: Mark standalone PD devices as updatable * vli: Set the protocol for FuVliUsbhubPdDevice types * Support the new gnuefi file locations * Cleanup ancient fwupdate-* EFI variables too (Fixes: #1739) * Detect kernel lockdown status * vli: Add the DEV instance ID to all devices * tpm-eventlog: Replay the TPM event log to get the PCRx values * tpm-eventlog: Store the eventlog hashes in binary form - Update to version 1.3.7: * Release fwupd 1.3.7 * Correctly delete UEFI variables * ci: allow working with podman w/o aliases * ci: fedora: force correct rpm package version * src: fu-engine: check version was updated by checking version * Correctly import PKCS-7 remote metadata * Add 'refresh' to fwupdtool * Add 'get-remotes' to fwupdtool * Generate a win32 setup binary * Fix display of UTF-8 characters on Windows * Move MOTD population into the daemon * fu-util: Discourage metadata refreshes more than once per day * Disable the battery percentage checks if UPower is unavailable * Allow getting the list of updates in JSON format from fwupdagent * Revert "trivial: Attempt to fix Debian CI" * fu-remote-list: emit a changed signal when modifying a remote * synaptics-mst: Skip self tests for systems with amdgpu * Allow applying all releases to get to a target version * Split up fu_engine_install() into two halves * logitech_hidpp: use the correct timeout for IO channel writes * Allow quirking devices that always require a version check * Shut down automatically when there is system memory pressure * Show the device parent if there is an interesting child * Allow the client to get the list of FwupdDevice children * Set the FwupdDevice parents in fwupdtool * Don't always get the vendor ID for udev devices using the parent * Add a runtime warning when adding a device without an vendor-id or protocol set * vli: Set more of the firmware max sizes automatically * vli: Add a SpiAutoDetect quirk for some of the PD devices * vli: Use a different protocol ID for i2c devices * vli: Add support for standalone Single PD devices * vli: Move generic SPI functionality into the FuVliDevice base class * vli: Remove the PD emulation code * vli: Use a more standard GUID for the child i²c and shared SPI devices * vli: Allow setting the device kind from a quirk * vli: Make more function names match the docs * vli: Move the SPI command quirking from FuVliUsbhubDevice down to FuVliDevice * vli: Rename FuVliUsbhubPdFirmware to FuVliPdFirmware * vli: Allow the device to specify the PD firmware header offset * vli: Add a FuVliDevice as a subclass to FuVliUsbhubDevice * vli: Define the device GType in the quirk file * vli: Move the CRC calculations out of usbhub scope * vli: Have one 'DeviceKind' for all objects * vli: Rename the `vli_usbhub` plugin to `vli` * Capitalize GNOME - package has grown a few new binaries: fwupdagent, fwupdate, fwupdtool and a tpm event debugging tool, that is packaged separately: fwupdtpmevlog- Drop docbook-utils-minimal build dependency, manpages are generated with gtk-doc.- Update to version 1.3.6: * plugins/coreboot: Add missing fu_hash dependency * trivial: synaptics-cxaudio: Add Google type C <-> 3.5mm adapter * fu-engine: don't expose bootloader version errors to users * trivial: dell-dock: drop unused quirk keyx * trivial: rename synapticsmst to synaptics-mst * trivial: actually set vendor ID for synaptics * fu-remote-list: Drop fallback path behavior * libfwupdplugin: Make sure systemd created environment variables exist * trivial: fu-remotes-list: drop usage of `FU_SELF_TEST_REMOTES_DIR` * trivial: synaptics-rmi: hardcode Vendor string * trivial: Set vendor ID for Dell WD19 to USB:0x413C (Fixes: #1653) * trivial: Document the use of vendor-id in each plugin * superio: Use the baseboard vendor as the vendor ID * uefi: Use the BIOS vendor as the vendor ID * coreboot: Use the BIOS vendor as the vendor ID * flashrom: Use the BIOS vendor as the vendor ID * dell: Hardcode a plausible vendor ID * emmc: Set the correct vendor ID prefix * fu-util-common: correct the default prompt for reboot/shutdown (Fixes: #1617) * Split out the remote loading from FuConfig * vli-usbhub: Fix the quirk for the legacy VIA 813 chip * Clarify error messages when no upgrades available * trivial: Don't handle a vendor-id requirement error that cannot happen * Only check the vendor ID if the device has one set * fu-install-task: Enforce that device protocol matches metadata * Add a new plugin that can parse the TPM event log * Allow other plugins to contribute report metadata * trivial: dell: hardcode the physical device ID for tpm to match the tpm plugin * Add a new plugin that exposes the system TPM device firmware version * Add fu_udev_device_set_flags() * trivial: Render large values of VersionRaw in a more portable way * trivial: wacom-raw: mark all Moffett SKUs as self recovery * Throw exit status 0 (instead of 2) if there is no firmware to be updated * Add a `dell-bios` version format * Add support for multiple LVFS::VersionFormat tags * Do not do semver conversion in fu_common_vercmp() * trivial: Deprecate fu_common_version_parse() * trivial: Support 'plain' in fu_common_version_from_uintXX() * Add the sysfs 'description' as the one-line device summary * trivial: Also print the parent keys when using FU_UDEV_DEVICE_DEBUG * trivial: Add fu_common_version_from_uint64() * trivial: Convert the VersionRaw value to a uint64_t for future use * Allow building on Windows with MinGW * synaptics-prometheus: Allow incremental version major and minor number * Replace 'scheduing' with 'scheduling' * Export the raw device version to the client --verbose output * trivial: Only dlopen the test plugin once * Export the device protocol to the client --verbose output * trivial: installed-tests: try to display journal for failed tests * trivial: ci: debian: enable verbose daemon logging for failure analysis * trivial: installed-tests: explicitly choose webcam device ID * trivial: debian: remove obj-* built files to fix back to back builds * trivial: ci: don't let bad symlinks cause debian build failures * trivial: debian: correct a dependency for libfwupdplugin-dev - Changes from version 1.3.5: * plugins: Fix potential use of NULL pointer in fu_dell_dock_mst_write_register * Fix shifting integer by more than 31 in fu_util_filter_device * synaptics-prometheus: Reload the device version after IOTA update * synaptics-prometheus: Reload the device version after update * trivial: wacom: remove coretronic config from Moffett scope * trivial: Fix a NULL/FALSE confusion * trivial: Add a BR for Fedora * trivial: Fix coreboot commit to fix CI * trivial: libfwupdplugin: clarify name of self test * plugins/coreboot: Improve version detection * plugins/coreboot: Get rid of FU_HWIDS_KEY_BIOS_VENDOR in coldplug * trivial: Move progressbar out of libfwupdplugin * trivial: Unexport fu_test_get_filename() * trivial: Unexport fu_test_compare_lines() * trivial: Unexport fu_test_loop_run_with_timeout() * trivial: Do not include non-introspectable functions in the GIR * trivial: Fix up a few introspection problems in FwupdPlugin * trivial: Include the Fwupd GIR in the FwupdPLugin GIR * trivial: Never add duplicate symbols to the map file * trivial: Properly namespace the defines in the exported header * Install development files for libfwupdplugin * Convert libfwupdprivate to a shared library libfwupdplugin * trivial: Allow building GCab from a subpackage * trivial: Fix under-include to define O_RDONLY * trivial: Allow compiling without * trivial: Do not use FuProgressbar in dfu-tool * synaptics-prometheus: Manually set the bootloader mode when attaching * trivial: Split out a new helper funtion * trivial: Add some optional debugging when hotplugging devices * trivial: Include the correct header for S_IRWXU * Always use the more portable 3-arg form for open() * trivial: Untangle FuHistory from FuPlugin * trivial: Allow compiling without * Revert "synaptics-rmi: Use the build ID as the version number to match the vendor tool" * Add missing documentation from the plugin interface * trivial: fu-udev-device: remove a prototype that was missed in b3d4d2ff * trivial: add missing gtk-doc fields for many files in src/ * trivial: fix compile failure without gudev * synaptics-prometheus: Mirror the _IS_BOOTLOADER from device to config * Allow setting the device flags using GObject properties * vli_usbhub: Set the composite parent at construction time * synaptics-prometheus: Set the composite parent at construction time * Allow plugins to set the parent during construction * vli-usbhub: Whitelist the PD and I²C devices * Set the protocol per-device not per-plugin * synaptics-rmi: Use the build ID as the version number to match the vendor tool * Create a REV_00 instance ID as this may be what the vendor needs to target * fu-util-common: Invert default behavior for reboot and shutdown prompts * trivial: fu-plugin-vfuncs: Add GTK documentation for all vfuncs * Make gudev a compile-time option * trivial: Set the offline trigger using an environment variable * trivial: ci: pull lintian from unstable for now. * trivial: stop including fu-hash.h as part of fu-plugin-vfuncs.h * Fix shebangs on scripts * trivial: Use prefixes for DATADIR in config.h for portability * Allow compiling GUsb as a subproject * trivial: fu-udev-device: add a to_string func for debugging * trivial: Don't assume that plugins end in .so * trivial: optionrom: remove unneeded includes * trivial: debian: ci: ignore library-not-linked-against-libc for more * trivial: remove version-format.md * trivial: Allow compiling without pwrite() * trivial: Allow compiling without * trivial: Allow compiling without realpath() * trivial: Allow compiling without HAVE_LC_MESSAGES * trivial: Allow compiling without getuid() * trivial: Allow compiling without * trivial: Allow compiling without * trivial: Allow compiling without * Ensure the _get_type() gets the same ABI version as the constructor * Use the correct unlocker when using GRWLock * trivial: plugins: only build coreboot when option set * fwupdtool: don't show a warning when calling `get-plugins` - Changes from version 1.3.4: * trivial: Don't force specific linker flash when cross building * dell: Use the more portable g_usleep() * trivial: Fix unused header includes * vli-usbhub: Make erasing less verbose and writing more obvious * vli-usbhub: Correctly print the 24-bit USB3 offset * vli-usbhub: Print the PD firmware offset and size for debugging * vli-usbhub: Open the parent device before attempting to read or write from the child * vli-usbhub: Set the install duration for the PD device * trivial: Fix a failed error prefix string * trivial: wacom-raw: Remove embedded from device name * wacom-raw: Correct HWID support * uefi: Just use a uint16_t for BootNext processing * uefi: Use a simpler entries set algorithm * vli-usbhub: Add support for writing using I2C passthru * vli-usbhub: Support updating PD devices that share the hub flash * vli-usbhub: Support the PD file format * trivial: uefi: correct a NULL pointer dereference * uefi: fall back to `ID_LIKE` when the path for `ID` doesn't exist (Fixes:# 1566) * uefi: Make generate_binary.sh more robust * Tokenize the Intel Hex file before parsing * trivial: Detect the USB version automatically * trivial: fu-util/fu-tool: explicitly block unsupported flags * Add support for matching requirements on device parents * Skip cleanup after device is done updating if `will-disappear` is set (Fixes: #1529) * efi: use a wildcard section copy for final EFI generation * modem-manager: explicitly use plain version format * modem-manager: add quirks for the Foxconn T77W968 modules * Allows confined snaps to activate fwupd via D-Bus * trivial: thunderbolt: clarify error message * Add a new property `Interactive` to the daemon * trivial: contrib/get-version.py: require git less hard * superio: Never read from port offset zero * superio: Fix regression when coldplugging superio devices * trivial: Fix Fedora CI build * trivial: Fix the autobuilt spec file with the new tarball version * Dynamically determine release version * trivial: synapticmst: allow missing `/proc/modules` * synapticsmst: filter invalid chip IDs * trivial: Provide some defines for common image names * Allow aborting early when using fu_archive_iterate() * Add fu_firmware_image_set_version() for future use * modem-manager: increase re-enumeration delay to 20000ms * modem-manager: add counterpart GUID for the DW5821e/eSIM * Add versions formats for the Microsoft Surface devices * usb: make loading vendor/product/serial strings non-fatal * trivial: Fix the protocol ID for VLI usbhub devices * trivial: wacom-raw: add more device IDs for Dell devices * trivial: contrib: don't require TSS for debian archs without EFI * fu-udev-device: Adjust bounds checking to be safer * fu-udev-device: Don't assume all devices have `device_file` * synaptics-rmi: correct an error cleaning up on probe * trivial: fu-udev-device: add some safety checks for fd * udev-device: fix offset of vendor id of hidraw devices * flashrom: switch to upstream source * trivial: fu-plugin: only show an error once "failed to open plugin" was being prefixed twice * trivial: debian: only use mingw-w64-tools in archs with UEFI plugin * fastboot: Fix a regression when updating modem firmware * trivial: conflict with old unifying plugin * Rename unifying plugin to logitech-hidpp (Fixes: #1329) * Add a new contrib script for installing a Dell BIOS from an EXE file * trivial: add-capsule-header: rename to make it easier to import * trivial: simple_client: make it easier to reuse code * trivial: firmware-packager: make it easier to reuse code * trivial: add-capsule-header: make it actually work * trivial: fix some gtkdoc sections * Bump the required gudev version * trivial: Fix a compile error with older versions of gudev * trivial: wacom: add vid/pid for panels in Moffett * trivial: post release version bump - Changes from version 1.3.3 * unifying: notify users to replug when using dfu control (Fixes: #1383) * trivial: 8bitdo: set a transient failure while waiting for user action * libfwupd: Add a new error type for user action needed * trivial: 8bitdo: show the same message for SN30pro and SN30pro+ * trivial: Fix up some typos from codespell * trivial: Ensure config.h is included in all source files * trivial: Fix up some NULL/FALSE confusion * trivial: Add all the _LAST enums that shouldn't be checked for ABI * trivial: Fix a typo that means that UEFI results were never cleared * Always report the update-error correctly for multiple updates * trivial: Fix fwupdmgr get-history if the firmware was not installed from the LVFS * trivial: Do not emit a warning if a child has no version number * Move the file descriptor lifecycle into FuUdevDevice * trivial: Fix some GtkDoc annotations * ebitdo: Modernize the plugin to use FuFirmware * nitrokey: Use fu_common_dump_raw() when debugging * thunderbolt: Create a unique GUID including Thunderbolt controller path * Use device safety flags to show prompts before installing updates * trivial: Use the new possible_plugin support for USB devices too * jabra: Move the Jabra-specific detach out into its own plugin * Ensure the device is open when doing the subclassed prepare() and cleanup() * vli-usbhub: Add support for updating V2 devices * Allow verifying the device image itself from fwupdtool * Use XMLb to query quirks * trivial: ci: disable pulling libxmlb from unstable * synaptics-prometheus: Don't add a config-subdevice in bootloader mode * dfu: Use the VID/PID to identify devices without download capability in runtime * trivial: debian: remove some unneeded lintian * trivial: debian: bump compat version * ebitdo: Add SN30Pro+ to recognized quirk list (Fixes: #1503) * dfu: Add several quirks for Realtek camera hardware * dfu: Always mark devices as UPDATABLE * uefi: use `genpeimg` to mark ASLR and DP/NX on EFI binary * trivial: solokey: correct a typo * trivial: fu-util: fix typo * uefi: rework ESP path detection and lifecycle * trivial: uefi: show more metadata in to_string method * trivial: fu-device: add new method to remove metadata * Add a plugin to update VIA USB hub hardware * trivial: Add fu_common_read_uint8_safe() * trivial: Fix two typos in fu_common_read_uint16_safe() * solokey: Allow parsing firmware with fwupdtool * Allow fwupdtool to dump details of common firmware formats * trivial: Do not do system coldplug when using FU_ENGINE_LOAD_FLAG_NO_ENUMERATE * trivial: fu-self-test: set polling self tests to slow * trivial: fu-tool: Allow `detach`/`attach` to prompt for device * Strip trailing whitespace from USB descriptors * trivial: Add fu_common_read_uint16_safe() * trivial: Add version to the FuFirmware->to_string() output * Add fu_firmware_set_version() * Add a systemd preset file for `fwupd-refresh.service` * trivial: dell: work around a memory leak caught by address sanitizer * ebitdo: if the device has the will disappear flag, don't wait for ack (Fixes: #994) * Add a new plugin for working with eMMC devices (Fixes: #1455) * fu-engine: Check multiple plugins if quirks match * trivial: don't try to enable LVFS from systemd * trivial: coreboot: fix a clang compiler error * fu-util: Add user friendly strings for all device flags * Add new device flags indicating update resilience * plugins: Add coreboot plugin * fu-plugin: Add fu_plugin_get_hwid_replace_value * trivial: Increase verbosity when actually updating devices * trivial: Allow plugins to use WAIT_FOR_REPLUG in prepare and cleanup * Add FuDevice->prepare() and FuDevice->cleanup() vfuncs for future use * dfu: Implement FuDevice->to_string() * trivial: colorhug: fix a crash that occurs when flashing sometimes * trivial: fu-util: break out of automatic reports if one is not automatic * thunderbolt: some more clarifications when using ICL * trivial: fwupd-refresh: activate motd if using systemd v243 or later * trivial: fwupd-refresh: allow exit code 2 for success * trivial: synaptics-cxaudio: Add Google Pixel buds * trivial: arch: ci: Wait some time for tpm_server to start up * Allow a custom FuFirmwareImage->write() in superclassed objects * dfu: Remove two completely unused helpers * dfu: Make DfuFirmware derive from FuFirmware * dfu: Make DfuImage derive from FuFirmwareImage * dfu: Remove private headers that do not need to exist * Fix device flag filtering * trivial: fu-engine: Don't compare device and content checksums * fu-engine: Read all releases and convert versions when comparing * Add new flags `can-verify` and `can-verify-image` * trivial: make verify and verify-update safer * trivial: test: add checksums for "stock" 1.2.2 * trivial: fu-udev-device: use parent udev device to indicate `internal` * trivial: fix TPM2 simulator tests for arch * trivial: uefi: don't add PCRs with all 0's * trivial: Fix a recent regression causing a double-free * synaptics-cxaudio: Support the ThinkPad USB-C Dock Gen2 * trivial: fu-util: add some extra checks around automatic reports * trivial: fu-tool: typo * fu-systemd: Use correct method for stopping units. * trivial: fu-udev-device: Use ID_PCI_CLASS_FROM_DATABASE if name not set * trivial: fu-plugin: quiet down debug output for optionrom plugin * 8bitdo: use will-disappear flag for sf30/sn30 controllers (Fixes: #783) * trivial: ebitdo: don't dump out firmware header unless plugin verbose * trivial: ebitdo: don't use local errors when writing firmware * Add a new device flag for indicating device won't come back * wacom-emr: Fix a regression for EMR devices * Add a generic DFU firmware object for plugins to use * dfu: Use FwupdInstallFlags rather than a DFU-specific version * dfu: Remove functionality for modifying DfuSe files * dfu: Remove functionality you can do now with fwupdtool * dfu: Remove the merge command as it's unused and broken * trivial: Add fu_firmware_parse_file() helper for future use * trivial: Remove the fuzzing details for DfuPatch * trivial: Add klass->to_string for superclassed FuFirmwareImage objects * dfu: Remove DfuPatch as no vendor actually uses this * dfu: Don't wrap provided VID-PID functions * dfu: Use the standard FuDevice custom flags functionality * dfu: Use klass_device->write_firmware() directly * dfu: Use the generic fu_plugin_usb_device_added() function * dfu: Use daemon flags to ignore devices rather than a special flag * dfu: Set the device state directly to avoid proxying signals * dfu: Use the built-in detach() and attach() vfuncs * Read firmware back from the device as a FuFirmware * dfu: Remove a pointless function * dfu: Remove support for the Metadata Store Proposal * dfu: Remove XTEA support * dfu: Remove the SREC and IHEX parsing out of the DFU plugin * ebitdo: Use klass_device->write_firmware like other plugins * trivial: Remove G_BEGIN_DECLS from all private headers * Remove FU_PLUGIN_RULE_REQUIRES_QUIRK as all the plugins now use it * Set all FuUdevDevice plugins to use FU_QUIRKS_PLUGIN * thunderbolt: recognize new 'generation' sysfs attribute * Rename and modernize the udev plugin * synaptics-rmi: Also add the product ID as a GUID without the minor version * synaptics-rmi: Correctly set the payload length rather than hardcoding it * synaptics-rmi: Write the core config correctly * synaptics-rmi: Decode BL7 status failures as actual errors * synaptics-rmi: Add some trivial debugging to help debug a write problem * trivial: uefi: Make efivarvs errors clearer (Fixes: 1330) * trivial: uefi: don't prefix efivar errors * trivial: Remove some now-unused vfuncs * altos: Modernize the plugin to simplify it * Create the custom plugin GType in common code * Reduce more boilerplate in plugins * synaptics-rmi: Check the correct register when querying bootloader mode * trivial: fu-engine: fix never reporting remotes * trivial: fu-util: don't show warnings for no reports to upload * trivial: debian: remove more conffiles from transitions (Closes: #932617) * trivial: debian/control*: Update for fwupdate transition * trivial: Fix a tiny memory leak when starting the daemon * modem-manager: Fix a tiny memory leak when starting the daemon * synaptics-rmi: Copy the behavior of rmi4utils for BL7 detach * synaptics-rmi: Simplify fu_synaptics_rmi_device_read() * synaptics-rmi: Set the version after ->setup has run * synaptics-rmi: Use the correct mask when getting the bootloader mode on BL7 * syanptics-rmi: The build_id is 3 bytes long, not 2 * synaptics-rmi: Read the config partition the same as rmi4utils * Provide a default implementation of common FuDevice actions * thunderbolt-power: avoid checking for bolt support * synaptics-rmi: Add some debugging for BL7 devices * Fix usage of incorrect type for return value * synaptics-rmi: Do as little as possible in device setup * synaptics-rmi: Speed up reading the PDT from 900ms to 30ms * fu-util: add support for a reinstall command * trivial: fu-util/fu-tool: update re-install help text to reinstall * trivial: fu-util: remove double printed message about succesful firmware update * trivial: fu-util: show no updatable devices error for update command * synaptics-rmi: Ignore the ATTN reports from the hardware when reading DATA * synaptics-rmi: Move the fuzzing instructions to the toplevel README * Fuzz the SREC and IHEX file parsers once more * Use parallel fuzzing for the SMBIOS checks too * synaptics-rmi: Fix the packing of the partition table * Add a plugin to update Synaptics RMI4 devices * trivial: Add a parallel fuzzing script * trivial: fu-util: output newline after prompt. * trivial: fix %u output in report upload * Add a --no-domain logging option * trivial: Fix compiler warning for impossible-to-hit condition * Add support for automatically uploading reports * trivial: motd: disable updating motd for now * trivial: fwupd-refresh: fix a clash with fwupd.service (Closes: #941360) * trivial: Fix Fedora CI * trivial: fu-udev-device: fix some assertions * Search up the tree for a vendor name rather than (ab)using the HID_NAME * Add some success messages when CLI tasks have completed * trivial: Put the boolean prompt on the same line as the text * Never show LicenseRef-proprietary to the end user * trivial: snap: correct install hook root directory * Export the instructions for detaching the device * uefi: detect unmounted ESP partitions (Fixes: #1405) * uefi: stop recording efibootmgr output after flash * trivial: post release version bump - Changes from version 1.3.2: * Add support for '' to disambiguate some firmware * thelio-io: Add a plugin to detach the Thelio IO board * trivial: uefi, dell: skip self tests with TPM if non-root (Fixes: #1396) * trivial: dell: quiet the TSS output * trivial: uefi: allow forcing to TPM2 via environment variable * Do not ask the user to upload a report if ReportURI is not set * Do not enumerate physical devices when running the internal self tests * trivial: libfwupd: skip tests if machine-id is empty too * Add a new plugin to update Conexant audio devices * Export the salted machine ID as a daemon property * Fall back to /var/lib/dbus/machine-id when required * trivial: add stalebot (Fixes: #1393) * trivial: dell-dock: correct another write_size error * Align the key values to the text *width* not the number of bytes * trivial: Move dbus directory location for snap too * trivial: Fix some NULL/FALSE confusion * synaptics-prometheus: Fix tiny memory leak when using FuSynapromConfig * trivial: Fix tiny memory leak when using FuSrecFirmware * snap: switch to core18 * trivial: Return the correct property when getting the host product * trivial: fu-util-common: fix description wrapping (Fixes: #1378) * fu-util/fu-tool: Map out changelogs from remotes * fu-util/fu-tool: Better display historical information * fu-history: Update device_modified in sql database during updates * unifying: Use the instance ID to check for supported devices * unifying: Ensure HID++ v2.0 peripheral devices get scanned by the plugin * trivial: Add some more defines to the srec parser * trivial: fix wget command in fu-tool.c * Allow parsing a raw SREC file * trivial: wacom: Add support for second vendor ID * uefi, dell-esrt: Show firmware version when capsule updates unavailable * Add some more debugging to the SREC and IHEX parsers * Print the instance IDs if the GUIDs are unconverted * Add fu_common_bytes_compare_raw() for future usage * Call the set_quirk_kv() vfunc for the superclassed object * uefi: make the TPM optional for runtime again (Fixes: #1362) * trivial: uefi: Make the TCTI output less verbose * Support in AppStream metadata * Include all GUIDs when uploading a report * Do not crash when starting tpm2-abrmd * trivial: Update DBus conf path for example Fedora package * Move D-Bus conf file to datadir/dbus-1/system.d * trivial: Add fu_io_channel_write_byte_array() for future use * trivial: post release version bump - Package new sub-packages typelib-1_0-FwupdPlugin-1_0 and libfwupdplugin1.- Fix file list- Update to version 1.3.1: (jsc#SLE-10751) * Allow disabling all plugins * trivial: Specify the tpm2-tss-devel version in the example spec file * Move to CI Fedora 30 * modem-manager: Fix two build warnings on Fedora 30 * synapticsmst: Add another name quirk for the ThinkPad USB-C Dock * Re-introduce GUID support to fwupdmgr and fwupdtool * uefi-recovery: Add a plugin to add a fake ESRT entry for device recovery * Add a DMI quirk for the Minnowboard Turbot * trivial: Make it easy to disable or enable libflashrom for distros * trivial: Don't use Recommends for RHEL 7 * unifying: fix timeout metadata * ci: arch: minor improvements * unifying: fix timeout * Allow disabling SSL strict mode for broken corporate proxies * trivial: Allow ignoring the daemon version check by using --force * Try to only show DMI product name once * trivial: fu-util-common: Show unknown devices as interesting devices * dell: Use TSS to query and build TPM vendor strings for GUIDs * trivial: dell: show reasons for lack of updates in `UpdateError` * fu-util-common: strip all trailing whitespace in XML description * trivial: fu-common: match all whitespace not just ' ' in `fu_common_strstrip` * fu-util: show release output in get-details again * unifying: use fu_firmware_strparse_uint16 to read be 16bit values * unifying: fix incomplete hex file parsing * fu-util/fu-tool: Print devices, remotes, releases using a tree * Add aliases for `get-upgrades` and `upgrade` * trivial: UEFI skip self tests if library fails to initialize * libfwupd: Add a new private function `fwupd_remote_set_remotes_dir` * trivial: add libtss2-dev into debian/control (Closes: #1324) * trivial: Fix up the GtkDoc Since lines for API only available in 1.3.x * trivial: Post branch version bump * thunderbolt: Add support for kernel safety checks (Fixes: #1312) * Include the kernel release as a runtime version * trivial: fu-util: Drop GUID support from get-devices * synapticsmst: Partially rewrite the plugin (Fixes #1105) * Remove replug flag after the device comes back from reboot * trivial: Fix running the tests on devices with the TPM in v1.2 mode * trivial: fu-util-common: more cleanup related to topology * trivial: fu-util: cleanup fwupdmgr get-details output * trivial: Don't use topology printing in --verbose mode * Make get-devices and get-topology aliases for one another * trivial: Adjust daemon device sorting * Make get-topology more useful by showing all information * trivial: Fix fu_common_string_append_kv() to align properly with idx > 0 * trivial: dell-dock: correct an error preventing write_size from being set * trivial: Do not warn about deprecated declarations * trivial: Update BRs for the example Fedora package * uefi: add test for TPM 2.0 PCR read function * uefi: use tpm2-tss library to read PCR values * fu-common: Use environment variables for systemd managed directories * Use more systemd directives for directories * trivial: fu-util: fix debug output for devices * Allow turning off the timestamp prefix for debugging * Add a ->udev_device_changed plugin vfunc * Add fu_device_rescan() and a FuDevice->rescan() vfunc * Remove the duplicate files in meson.build * Hash the source files when generating the daemon hash * Split up source files in the build script * uefi: add support for tpm2-tools 4.X * trivial: plugins: clarify stance on afuefi.efi * trivial: plugins/: Update README * trivial: disable gtkdoc by default * trivial: update references of hughsie/fwupd to fwupd/fwupd * Publish docs to fwupd.github.io using CircelCI * Add support to integrate into the motd (Fixes: #1270) * Simplify get-devices output to not show un-useful fields * fu-engine/fu-config: Reload metadata store when configuration changes * trivial: If no devices support updates, show messaging (Closes: #1295) * trivial: uefi: set vendor name for system firwmare from DMI data * unifying: update Solaar url * thunderbolt: Fix logic to work properly with ICL thunderbolt controller * Add fu_udev_device_get_device_file() helper * trivial: Fix regression when using fu_device_incorporate() * trivial: Fix a potential crash when using FuPlugin in the self tests * synapticsmst: Make FuSynapticsmstConnection an actual GObject * synapticsmst: Use the same style as other plugins * trivial: Add some helper functions for GByteArray * Do not use FuDevice metadata for the physical and logical IDs * Use fu_common_string_append_kv() in subclassed device * synapticsmst: Use G_DECLARE_FINAL_TYPE to simplify the object * synapticsmst: Add a SynapticsMSTBoardID for another Lenovo dock * trivial: remove unnecessary CUSTOMERID_DELL define * synapticsmst: Add a SynapticsMSTBoardID for a Lenovo dock * synapticsmst: Display the board ID in non-hex form in the error message * synapticsmst: Use a more suitable icon for the device * trivial: Remove unused variable * Never use memcpy() in a possibly unsafe way * Add a ->to_string() vfunc to FuFirmware * Use FuFirmware as a container for firmware images * Allow filtering devices when using the command line tools * Be more accepting when trying to recover a failed database migration * trivial: Add translation for X-ThunderboltController * trivial: fixup standalone installer * modem-manager: add counterpart GUID for the DW5821e * solokey: Release the interface and rebind the kernel driver on close * fu-tool: Port ability to update a single device from fwupdmgr * uefi: Actually write the new device path if different than before * Allow setting custom flags when using fwupdate * trivial: Do not show a critical warning if no firmware is specified * trivial: Fix overzealous search-replace action in user string * Verify we don't break the ABI * Fix a crash when stopping the fwupd service * Relax the certificate time checks in the self tests for the legacy certificate * trivial: add cache directory into systemd unit rw paths * Never show AppStream markup on the console * Do not segfault when trying to quit the downgrade selection * trivial: Update icons for Thunderbolt and MST devices * Add support for the SoloKey Secure * trivial: Allow a device to *clear* a firmware version * trivial: debian: For signed package fill out Built-Using (Closes: #932757) * Allow specifying GUID to check any version exists * trivial: post release version bump * Release fwupd 1.2.10 * Disable the flashrom plugin by default * trivial: thunderbolt: catch failure setting up device * dell-esrt: Improve the experience for the plugin (Closes: #1245) * fu-util: When unlocking prompt for reboot if applicable * remove those PIDs with Bluetooth interface, Wacom updater doesn't support updating from Bluetooth interface * flashrom: Only show DEBUG and DEBUG2 output if using --plugin-verbose=flashrom * flashrom: Only call flashrom_programmer_init() on whitelisted boards * flashrom: Fix no version format set * fu-util: Show devices with an UpdateError in get-devices output * trivial: uefi: use UEFI-dummy for device ID instead of just uefi * trivial: fix error handling for non UEFI case (#1220) * Add a specific error code for the low battery case * Fix Fedora docker build missing directory: dist * uefi: Determine whether running in legacy mode or not (Fixes: #1220) * trivial: ci: debian: Only turn on flashrom when running CI * trivial: Fix typos in error messages * Allow client code to construct objects from GVariant blobs * Export functionality to build an array of objects * flashrom: Use libflashrom * trivial: Fix the version script to pick up boxed types * trivial: Correctly order the map entries according to vercmp rules * trivial: Fix pylint issue in the version script * Add meson target to fix translations * Add support for 8bitdo USB Retro Receiver * Use the newer features of GRWLock rather than reinventing it * Revert "Allow SuperIO updates to be done live" * uefi: Try to find a duplicate using the loadopt name * uefi: Provide a quirk to disable the use of the UX capsule * trivial: uefi: use the path for efibootmgr that was detected * synaptics-prometheus: Fix installing CONFIG firmware updates * synaptics-prometheus: Set the install duration from a quirk * synaptics-prometheus: Don't emit critial warning when updating config firmware * synaptics-prometheus: Fix missing field in the IOTA reply struct * Create SECURITY.md * redfish: Never set NULL device name * modem-manager: Never set NULL device name * ata: Never set NULL device name * trivial: Add some parameter guards to FuDevice * trivial: snap: make polkit directories if they don't exist (Fixes: #1205) * trivial: fu-main: clarify missing PK file error * synapticsmst: fix GUID generation (Closes: #1207) * Lite Mk II flag for use-shim-unique * trivial: circleci: try to fix automatic snap deployment * Allow SuperIO updates to be done live * fu-util-common: Support empty proxy strings (Fixes: #1199) * trivial: uefi: clarify error message * trivial: Fix non-systemd build * trivial: Sync example spec file with downstream * trivial: post release version bump - Drop fwupd-bsc1143905-hash-the-source-files.patch: Applied upstream. - Add pkgconfig(tss2-esys) BuildRequires: New dependency. - Add gtk-doc BuildRequires and pass gtkdoc=true to meson, build api docs even when using source service.- Add fwupd-bsc1143905-hash-the-source-files.patch to hash the source files instead of libfwupdprivate.a to avoid the checksum change due to the random naming LTO profile sections (bsc#1143905)- Update to version 1.2.10: * Disable the flashrom plugin by default * dell-esrt: Improve the experience for the plugin (Closes: #1245) * fu-util: When unlocking prompt for reboot if applicable * remove those PIDs with Bluetooth interface, Wacom updater doesn't support updating from Bluetooth interface * flashrom: Only show DEBUG and DEBUG2 output if using - -plugin-verbose=flashrom * flashrom: Only call flashrom_programmer_init() on whitelisted boards * flashrom: Fix no version format set * fu-util: Show devices with an UpdateError in get-devices output * Add a specific error code for the low battery case * Fix Fedora docker build missing directory: dist * uefi: Determine whether running in legacy mode or not (Fixes: #1220) * Allow client code to construct objects from GVariant blobs * Export functionality to build an array of objects * flashrom: Use libflashrom * Add meson target to fix translations * Add support for 8bitdo USB Retro Receiver * Use the newer features of GRWLock rather than reinventing it * uefi: Try to find a duplicate using the loadopt name * uefi: Provide a quirk to disable the use of the UX capsule * synaptics-prometheus: Fix installing CONFIG firmware updates * synaptics-prometheus: Set the install duration from a quirk * synaptics-prometheus: Don't emit critial warning when updating config firmware * synaptics-prometheus: Fix missing field in the IOTA reply struct * Create SECURITY.md * redfish: Never set NULL device name * modem-manager: Never set NULL device name * ata: Never set NULL device name * synapticsmst: fix GUID generation (Closes: #1207) * Lite Mk II flag for use-shim-unique * fu-util-common: Support empty proxy strings (Fixes: #1199) - Add python3-setuptools to BuildRequires for generate-version-script.py- Update to version 1.2.9: * Release fwupd 1.2.9 * trivial: Add two new translatable strings for new category types * Check if the system is offline during install, rather than at startup * Prompt the user to shutdown if requried when installing by ID * Use the correct file extension for the offline updates cache * trivial: Allow using --force to use the wrong daemon version * trivial: Display the correct expected command * standalone-installer: Be smarter about existing installed fwupd * Add a plugin to update Synaptics Prometheus fingerprint readers * trivial: standalone-installer: rename uninstall argument to cleanup * fu-util: Check the daemon version is at least the client version * fu-util: Check that daemon is started by expected unit * fu-util-common: when stopping a daemon, check for snap too * Allow using --force to trigger a duplicate offline update * trivial: Allow using FuUsbDevice without a GUsbDevice * trivial: Copy the icons if unset for the device child * trivial: Copy the physical ID if unset for the device child * trivial: Ensure the parent ID is up to date if the device ID changes * trivial: Fix typo when setting the parent ID * trivial: Disable the flatpak CI build * Allow handling FORCE for devices that subclass FuDevice * uefi: Fix a libasan failure when reading a UEFI variable * trivial: Fix a memory leak found using libasan * trivial: Fix an libasan failure in the dell plugin * trivial: Fix some dead code spotted by coverity * trivial: Fix a typo spotted by coverity * trivial: Fix a missing config.h include in a new source file * Dynamically read path to use for /system-update * Display the remote warning on the console in an easy-to-read way * ata: Set version format to plain for devices obtained from udev * trivial: Only apply SmbiosManufacturer to release version for internal * trivial: Fix two bugs in the hardware self tests script * Never guess the version format from the version string * Only force a semver when the device opts-in * Export the version-format to clients * Add missing gtk-doc documentation * dfu: Add some trivial, but useful, debugging for AVR DFU devices * dfu: Correctly identify DFU firmware that starts at offset zero * dfu: Don't keep showing trivial debug output * dfu: Reset the forced version during attach and detach * ata/nvme: For devices running Dell firmware, set `VersionFormat` (Fixes: #1169) * fu-engine: Check if VersionFormat is ambiguous when adding devices * trivial: Fix fwupdate --apply * Only use class-based instance IDs for quirk matching * trivial: dell-dock: set minimum board to 6 * trivial: post release version bump- Update to version 1.2.8: * Don't upload reports when the user has configured their system in a broken way * Allow setting the daemon verbose domains at runtime * Allow fwupdmgr to modify the daemon config * Do not compare version formats when the release format is unknown * Do not fall back integers to a plain version format * Use the device version format when converting the release version * Set the VersionFormat using the metadata or the UEFI quirk - Changes from version 1.2.7: * l10n: Create Lithuanian translation file * l10n: Update LINGUAS * Updated: Add support for 8BitDo M30. * modem-manager: increase the timeout to wait for modem after uninhibited * modem-manager: implement qmi pdc active config selection as attach() * fu-engine: When removing activation flag match the correct version * Require --force to install a release with a different version format * Match the old or new version number when setting NEEDS_REBOOT * Make an error message clearer when there are no updates available * Add support for the not-child extension from Logitech * thunderbolt: Set require-ac for Thunderbolt devices (Fixes: gh#hughsie/fwupd#1142) * Fix some typos spotted using codespell * Add a component categories to express the firmware type * fu-tool: Port get-history command to fwupdtool * Recreate the history database if migration failed * Move the core built-in 'fwupd' remote over to the dell-esrt plugin * snap: Add a custom systemd unit to call activation on shutdown (Fixes: gh#hughsie/fwupd#1125) * ata: Flush cache before standby and activate * synapticsmst: blacklist plugin when using amdgpu (Fixes: gh#hughsie/fwupd#1121) * uefi: add a new option to specify the os name * Return the newest device when using fu_history_get_device_by_id() * uefi: More carefully check the output from tpm2_pcrlist * uefi: Don't overwrite CustomFlags if set from a quirk * Shut down the daemon if the on-disk binary is replaced * ata: Correct activation functionality * Fix version comparisons after reboot for some formats * fu-tool: save history from stuff installed with `fwupdtool` - Changes from version 1.2.6: * ata: send ATA standby immediate when activating firmware * offline: Be more graceful when dealing with Plymouth failures * Save the new version in the history database for offline updates * Show the DeviceID when showing the updates list * Allow forcing an offline-only update on a live system using --force * Do not schedule an update on battery power if it requires AC power * superio: Add InstallDuration default value * superio: Add support for writing new e-flash contents * superio: Fix reading the attestation checksum * superio: Add support for reading the device checksum * superio: Use the chipset ID in the device name * superio: Move the device flush before getting the register map * superio: Move all the IT89xx code to a subclassed device object * superio: Move all the IT85xx code to a subclassed device object * superio: Split and export fu_superio_device_ec_writeX() * superio: Remove the port from fu_superio_device_ec_read() * superio: Move the register read/write into the FuSuperioDevice object * superio: Check the IOBAD0 is usable during setup * superio: Use fu_device_set_firmware_size() * superio: Move some constants out to the common header * superio: Use GObject properties in FuSuperioDevice * superio: Convert FuSuperioDevice to be derivable * Update Plymouth when updating pending firmware * Ask to reboot after scheduling an offline firmware update * Do not fail when scheduling more than one update to be run offline * Allow running offline updates when in system-update.target * Fix the location of fwupdoffline in the service file * Add optional vfuncs to allow detaching and attaching verify() * superio: Add list of SPI commands for future usage * Add a verify-update command to fwupdtool * uefi: Actually upload the UPDATE_INFO entry for the UX capsule * superio: Get the chip size from the EC rather than hardcoding * uefi: Check the error code of QueryCapsuleCapabilities() correctly * Update the UEFI UX Capsule Header checksum when needed. * uefi: Copy the shimx64.efi binary for known broken firmware * Correctly get the check the new version for devices that replug * Add a simple script to add a capsule header * Ensure the PKCS-7 client certificate exists at startup * fix makecab directive options * fwpup.service: use display-manager.service instead of gdm.service * Allow signing the fwupd report with the client certificate * Add a D-Bus method to generate a signature using the self-signed client certificate * Allow signing and verifying data using a PKCS-7 self-signed client certificate * Fix a critical warning when loading a PKCS-7 certificate with no DN * Include all device checksums in the LVFS report * modem-manager: Fix a trivial build warning * superio: Fix a trivial build warning * Move out the offline update functionality to a new binary * Do not reboot when failing to start fwupd during offline updates * Do not write the schema version to the db when loading * Do not recreate XbSilo caches when running on a readonly filesystem * Add the fwupdagent binary for use in shell scripts * Allow restricting firmware updates for enterprise use * standalone-installer: new --allow-older and --allow-reinstall options * Show the upgrade and downgrade flags when getting releases for a device * Rename FwupdRelease:trust-flags to FwupdRelease:flags * fu-tool: Save device state to @LOCALSTATEDIR@/lib/fwupd/state.json on actions * modem-manager: implement support for qmi-pdc * Add a plugin to support ModemManager hardware * fu-tool: Don't let failing to find dbus prevent engine from starting * ata: Support delayed activation * dell-dock: Use activation when calling fwupdtool activate * Add a support for delayed activation * uefi: Fix the self tests when running on Fedora SilverBlue * Do not fail to start the daemon if tpm2_pcrlist hangs * po/make-images.sh: quote LOCALEDIR and PYTHON3 * meson: print stderr of python3 command instead of stdout * Revert "contrib/debian: Switch to debian unstable" * Add elogind support - Changes from version 1.2.5: * uefi: fix segfault in fwup_set_update_statuses * Show in Flathub correctly * debian: explicitly depend on shared-mime-info * superio: Implement detach() and attach() * superio: Correct the names of some constants and improve debugging support * dell-dock: Filter the last supported payloads of certain board 4 SKUs * circleci: Manage the lifecycle of the snap * Add support to run snap build in CircleCI * wacom-usb: Use the correct buffer format for the touch module * wacom-usb: Set the install duration for each device type * wacom-usb: Return with an error if there were too many retries * wacom-usb: Make updating less verbose * Convert all child instance IDs when converting the parent * uefi: Allow devices to create more complete fake UEFI devices * unifying: Fix regression when recovering from failed flash * Ensure libxmlb dir exists for LGTM.com * Add C build configuration for LGTM.com * Use G_BEGIN_DECLS correctly for internal headers * standalone-installer: Fix issue found by LGTM * Use '#pragma once' to avoid a lot of boilerplate * Force LGTM to see Python 3 * fwupd: Hide firmware-packager behind meson option` * fu-common-cab: Correct handling of CAB files w/ nested directories and older libgcab * Fix a regression in using the InstanceIDs for quirk matching * thunderbolt: Convert the instance IDs as we never open the device * udev: Manally call fu_device_setup() to convert the instance IDs * fu-tool: Correct a crash caused by calling fwupdtool update * fu-tool: Don't fail if dbus is unavailable * contrib/debian: Switch to debian unstable * wacom-usb: Record the block number when failing * wacom-usb: The touch address is big endian * wacom-usb: Accept a non-binary IHEX file for the touch update * wacom-usb: Only poll when the device status is 'busy' * wacom-usb: Only reboot the device when all composite devices have been updated * wacom-usb: Fix flashing failure with latest Intuos Pro tablet * dfu: Fill holes when reading SREC files * Add fwupd_guid_from_string() to drop dep on uuid * wacom-raw: Check the InstanceID rather than GUID * Defer the InstanceID->GUID hashing until after setup * ata: Check for USB enclosures as well * Do not use efivar just to print a mixed endian GUID * Add fu_device_add_instance_id() and prefer explicit conversion * Report the DeviceInstanceIDs to `fwupdmgr get-updates` * Export some of the GUID functionality * Allow a plugin to set _ANOTHER_WRITE_REQUIRED to run more than one plugin * nvme: Add an extra check for Dell plugins to avoid false positives * ata: Add support for detecting Dell GUIDs * Fix the self tests when using glib2 >=2.59.0 * Add support to call composite prepare and cleanup using fwupdtool * uefi: Disable -Wno-address-of-packed-member * uefi: Don't unconditionally enable Werror for the EFI binary * Disable -Wno-address-of-packed-member - Changes from version 1.2.4: * Remove the autogenerated headers in the gettext files * ata: Default to the non-activation 0xE subcommand * fastboot: Use a much longer timeout as the removal delay * fu-progressbar: be more quiet when running non-interactive * fu-tool: Show UpdateMessage if applicable for install command * dfu: Simplify the SREC parser to avoid a crash with an invalid file * wacom-raw: Use the correct error codes when the panel is not supported * wacom-usb: Add some more information to the README * fu-keyring-utils: Don't fail missing PKI directory when compiled with GPG/PKCS7 * dell: Check that the flash interface command is available * wacom-usb: Fix the plugin name to allow devices to be updated * fastboot: flash the partition after downloading the file * uefi: Add a quirk to use the legacy bootmgr description * ata: Mark all devices as needing a reboot * ata: Add a new plugin to upgrade firmware on ATA/ATAPI hardware * udev-device: Add a utility function for debugging * udev-device: Set the firmware revision automatically * udev-device: Set the serial number automatically * udev-device: Fall back to non-database model and vendor values * udev-device: Fix critical warning if the device has no parent * dell-dock: Add support for a passive flow * Add support for an `UpdateMessage` and display it in tools * fu-tool: Port the `get-updates` command over * When using `directory` remote type automatically generate metadata * libfwupd: Add support for new remote type "directory" * Ensure cabinet archives always have a container checksum * Add support for a per-release source and details URL * When generating a CAB Silo use the prefix "components" * uefi: Add a trivial debugging statement to debug a UX capsule failure * uefi: Use fwup_new0() to allocate the updates table array * nitrokey: Correct Nitrokey Storage invalid firmware version read * dell-dock: Add support for flashing Thunderbolt over I2C * wacom-raw: Add a plugin to update Wacom embedded EMR and AES panels * fu-util/fu-tool: sync up reboot and shutdown behavior * dfu: Ignore the SUB ASCII value * dfu: Fix the parser to support extended segment addresses * dfu: Support ihex files with leading comments don't show an error * uefi: Correct a boot order creation bug (Fixes: gh#hughsie/fwupd#956) * uefi: Remove all variable length arrays * uefi: Fix a logic bug in fwup_search_file() * uefi: Use _cleanup_free in one more place * uefi: Do not pass required attrs to fwup_delete_variable() * uefi: Delete the old Linux-Firmware-Updater boot entry * uefi: Use the GNU-EFI BOOL type * Check if plugin changed after the device attaches or detaches * uefi: Refactor and simplify the EFI loader * Show a console warning if loading an out-of-tree plugin * UEFI: Do the UX checksum calculation in fwupd * wacom-usb: Add two more Intuos tablets * nvme: Add the needs-shutdown quirk to Phison NVMe drives * Add _NEEDS_SHUTDOWN flag for devices * Use GCC __cleanup__ features in the EFI loader * nvme: Add flag to support manually aligning the firmware to the FWUG value * nvme: Support FGUID to get the SKU GUID * nvme: Support FWUG to get the write block size * nvme: Add trivial comment to clarify address bitshifting * uefi: Do not check the BGRT status before uploading a UX capsule * dfu: Fix flashing various Jabra devices * upower: Add support for checking battery percentage * nvme: Check the return code of the admin passthru ioctl * fu-tool: Add support for an 'update' command to fwupdtool * dell-dock: Set minimum board to board 4 * dell-dock: Workaround a manufacturing bug for board level 4 * dell-dock: Wait longer for re-enumeration on TBT SKU * superio: Support IT89xx devices * fu-main: remove incompatible locale error message * Add a new plugin checklist (Fixes: gh#hughsie/fwupd#899) - Dropped obsolete patch: fwupd-bsc1130056-change-esp-os-name.patch (upstream PR: gh#hughsie/fwupd#1119 - Fixed fwupd-bsc1130056-change-shim-path.patch so that it works with the new files - Cleaned up changelog- Stop shipping polkit rules, as we have the distro specific setup in polkit-default-privs (boo#1125428).- Add fwupd-bsc1130056-change-esp-os-name.patch to change the OS directory in ESP (bsc#1130056) - Add fwupd-bsc1130056-change-shim-path.patch to set the default shim binary for openSUSE/SLE (bsc#1130056) - Link fwupd*.efi.signed to fwupd*.efi as requested by fwupd (bsc#1129466)- fwupd.spec: fix shell syntax error in %postun section (boo#1120363).- Update to version 1.2.3: * Correctly migrate the history database - Changes from version 1.2.2: * Log an error if started with an incompatible locale * Fix building with -Wl,-z,defs * ebitdo: Fix the reported version number if the daemon locale is not C.UTF-8 * Add Dell TB18DC to the known devices list * Allow replacing the last byte in the image when using 'dfu-tool replace-data' * Check the device checksum as well as the content checksum during verify * Submit the device firmware checksum and update protocol in the submitted report * Include the device checksum and update protocol in the historydb * uefi: Add the PCR0 value as the device checksum for system firmware * Add new API to get the release protocol from the metadata * Allow plugins to define support for a 'well-known' protocol * uefi: When adding headers set the header size to 4k * uefi: Append the header on capsules without headers from Linux * flashrom: Ensure the quirks database is set on the new object * uefi: Do not add devices with invalid GUIDs * Do not allow a GUID of zero * Add shared functionality for reading and writing with O_NONBLOCK * Only run attach and detach if the device is in the wrong mode * Sanitize the version if the version format has been specified * wacom-usb: Remove the DTH generation hardware as it will not work with fwupd * thunderbolt: Remove a superfluous boundary condition when verifying update * Add a plugin to update hardware that supports fastboot * Fix a regression when doing GetReleases on unsupported hardware * dfu: Require a specific USB class and subclass for DFU mode * Correctly parse format the version numbers correctly using old metadata * amt: Fix a crash if AMT returns an empty response * Check plugins set error on failure * contrib: Add a simple python3 client * installed-tests: Adjust to actually use a remote for installed tests * Add more standard USB identifier GUIDs * wacomhid: Rename to wacom-usb * Provide a way for plugins to decompress a custom archive to ram - Changes from version 1.2.1: * Remove DaemonVersionFormat=quad * Shut down the daemon after 2h of inactivity * Create a silo index to speed up GUID queries * Fix flashing the 8bitdo SF30 * Speed up fwupd startup by loading less thunderbolt firmware * Query the XbSilo when calling fu_plugin_check_supported() * Guess the version format when it is not provided * Fix a use-after-free when using valgrind and --immediate-exit * Add per-release install duration values * Fix showing the custom remote agreements * Be more explicit setting the update state * Include the os-release information in the release metadata - Changes from version 1.2.0: * ebitdo: remove SF30/SN30 pro device ids * dell-dock: Drop delayed MST callback routine * synapticsmst: Adjust EVB board handling * synapticsmst: Remove the content checking of firmware * synapticsmst: Access Board ID through memory instead In firmware images HDCP 2.2 will be enabled by default,so access to flash region will fail.` * contrib: Adjust flatpak build for moving to flathub * dell-dock: Prefer to flash VMM5331 via I2C instead of DP aux * Use HTTPS_PROXY if set * firmware-packager: Make it clearer to use * Sort the firmware sack by component priority * flatpak: Update gnu-efi to latest version * amt: Set the full device version including the BuildNum * fwupdmgr/fwupdtool: Move monitor command to fwupdtool * fwupdmgr/fwupdtool: Move firmware builder from fwupdmgr to fwupdtool * Add version format quirks for several Lenovo machines * uefi: Set the quirks on created devices * dell_dock: Use correct offset for finding version of MST * dell-dock: Add missing unlock call for MST via dell_dock plugin * Support the Intel ME version format * Port from libappstream-glib to libxmlb * Bump requirement to meson 0.46.0 * fu-main: Catch SIGTERM while update is in progress * fu-tool: Stop any running daemon over dbus before loading engine * meson: Bump dependency to 0.44 and adjust sysconfdir handling * dell-dock: If marketing name is invalid don't fail initialization * Readme Updated: Added KDE Discover as one more graphical front-end available for fwupd. * dell-dock: Correct a situation that error wasn't propagating * Don't segfault if a plugin returns FALSE from UpdateFunc with no error set * dell-dock: Use different debug strings for each device type * dell-dock: Don't use the VLA feature in the new dock * Add a plugin for an upcoming Dell USB-C dock * contrib: Add information on how to use debugging scripts * Allow setting the version format from a quirk entry * Don't use AppStream-glib for string helpers * Don't use AppStream-glib for version helpers * Don't use AppStream-glib for the GUID helpers * fu-device: Ensure that parent ID is created before creating quirked children * Update all sub-devices for a composite update * Stop showing the current release during updates in fwupdmgr * uefi: Move the TPM unlocking functionality from the Dell to UEFI plugin * Run the Dell plugin initialization after the UEFI plugin * thunderbolt-power: Fix possible linker problem * Allow firmware files to depend on versions from other devices * fu-debug: Redirect all debugging output to stderr instead of stdout * synapticsmst: Adjust panamera ESM update routine for some reported issues * fu-engine: Optionally wait for replug before updating a device * fu-device-list: Use delayed device removal when removing the tree * thunderbolt: Use replugging from the daemon * Add support for devices to show an estimated flash time * Marked some CL options for translation * ci: Run clang static analysis for Ubuntu build rather than just clang compiler * nvme: Initialize the buffer before reading the contents * contrib: Add a standalone installer creation script * rts54hid: Add support for Realtek USB devices using vendor HID commands * fu-engine: Don't show devices pending a reboot in GetUpgrades * Add FuMutex helper to make various parts of the daemon thread-safe * rts54hub: Add support for Realtek USB devices using vendor HUB commands * uefi: Check the amount of free space on the ESP * fu-tool: Import debugging options from fu-debug like fu-main * superio: Set the physical and logical IDs - Add pkgconfig(xmlb) BuildRequires: New dependency.- Add pesign-obs-integration to BuildRequires and add fwupd*.efi to BRP_PESIGN_FILES to get it signed - Add LC_IMAGES and use efivar only if %{with efi_fw_update} + Also update the version requirement of efivar - Disable Redfish and NVME plugins if %{without efi_fw_update} since those two plugins require efivar - Remove fwup from BuildRequires since fwupdate is already merged into fwupd.- Use gnu-efi only if %{with efi_fw_update}, always use pkgconfig(efivar) - Fix file list- Amend %post and %postun to install/uninstall fwupd*.efi to the EFI system partition + Also add shim to Requires for fwupdx64.efi - Mark fwupdate as obsolete + fwupdate has been merged into fwupd since fwupd 1.1.0.- fwupd is require for thunderbolt firmware update in SLE15-SP1(fate#322681)- Update to version 1.1.2: + New Features: - Add a new device flag "ignore-validation" that will override checks - Add a new plugin to enumerate EC firmware - Add a new plugin to update NVMe hardware - Add a plugin for updating using the flashrom command line tool - Allow the device list to take care of waiting for the device replug - Allow updating just one specific device from the command line - Allow upgrades using a self-signed fwupd.efi binary - Download firmware if the user specifies a URI - Include serial number in daemon device output when trusted - Notify all plugins of device removals through a new vfunc - Use boltd force power API if available + Bugfixes: - Add an install hook for classic snap - Allow forcing installation even if no AC power is applied - Allow using --force to ignore version_lowest - Always use the same HardwareIDs as Windows - Check the device state before assuming a fake DFU runtime - Copy over parent GUIDs from other plugin donors - Detect location of python3 interpreter - Do not add udev devices after a small delay - Don't fail to run if compiled without GPG/PKCS7 - Fix a segfault in fwupdtool caused by cleanup of USB plugins - Implement the systemd recommendations for offline updates - Improve performance when reading keys from the quirk database - Remove children of devices when the parent is removed - Rewrite synapticsmst to use modern error handling - Rewrite the unifying plugin to use the new daemon-provided functionality - Show a time estimate on the progressbar after an update has started- Use noun phrase for summary. Trim request for comments from description.- Update to version 1.1.1: + New Features: - Add support for the Synaptics Panamera hardware - Add validation for Alpine and Titan Ridge - Improve the Redfish plugin to actually work with real hardware + Bugfixes: - Allow different plugins to add the same device - Allow flashing unifying devices in recovery mode - Allow running synapticsmst on non-Dell hardware - Check the ESP for sanity at at startup - Do not hold hidraw devices open forever - Don't override _FORTIFY_SOURCE when building the EFI binary - Don't show passwords in fwupdmgr - Fix a potential segfault in smbios data parsing - Fix encoding the GUID into the capsule EFI variable - Fix various bugs when reading the thunderbolt version number - Reboot synapticsmst devices at the end of flash cycle - Show status messages when the daemon is initializing - Show the correct title when updating devices - Show the reasons that plugins are not run on the CLI - Use localedir in po/make-images- Run %udev_rules_update in post as package install udev rules- Update to version 1.1.0: (FATE#326702) + New Features: - Add a initial Redfish support - Add a tool to mimic the original fwupdate CLI interface - Allow devices to assign a plugin from the quirk subsystem - Change the quirk file structure to be more efficient - Merge fwupdate functionality into fwupd - Run a plugin vfunc before and after all the composite devices are updated - Support more Wacom tablets + Bugfixes: - Add release information for locked devices - Allow building with older meson - Detect the EFI system partition location at runtime - Do not use 8bitdo bootloader commands after a successful flash - Enable accesing downloaded files in flatpak and snap - Fix a potential buffer overflow when applying a DFU patch - Fix downgrading older releases to devices - Fix flashing devices that require a manual replug - Fix several small memory leaks in various places - Fix the retrieval of Redfish version - Fix unifying failure to detach when using a slow host controller - Set the Wacom device status when erasing and writing firmware - Show errors in the CLI if unable to access directory - Use the parent device name for Wacom sub-modules - Removed enable_pkcs7_when_testing_only.patch- Update to version 1.0.8: + New Features (including version 1.0.7): - Add an plugin to update some future Wacom tablets - Add 'fwupdmgr get-topology' to show logical device tree - Add support for creating a flatpak - Add support for creating a snap - Add support for Motorola S-record files - Add the Linux Foundation public GPG keys for firmware and metadata - Show a translated warning when the server is limiting downloads - Add enable-remote and disable-remote commands to fwupdmgr - Add fu_plugin_add_compile_version() for libraries to use - Allow requiring specific versions of libraries for firmware updates - If no remotes are enabled try to enable the LVFS - Show a warning with interactive prompt when enabling a remote + Bugfixes (including version 1.0.7): - Add a firmware diagnostic tool called fwupdtool - Adjust all licensing to LGPL 2.1+ - Allow installing more than one firmware using 'fwupdmgr install' - Allow specifying hwids with OR relationships - Do not call fu_plugin_init() on blacklisted plugins - Do not require libcolorhug to build - Fix a crash in libfwupd where no device ID is set - Fix a potential DoS in libdfu by limiting holes to 1MiB - Fix a segfault that sometimes occurs during cleanup of USB plugins - Fix Hardware-ID{0,1,2,12} compatibility with Microsoft - Hide devices that aren't updatable by default in fwupdmgr - Search all UEFI GUIDs when matching hardware - Stop matching Nintendo Switch Pro in the 8bitdo plugin - Check that EFI system partition is mounted before update - Disable synapticsmst remote control on failure - Don't recoldplug thunderbolt to fix a flashing failure - Fix SQL error when running 'fwupdmgr clear-offline' - Improve the update report message - Only enumerate Dell Docks if the type is known - Only run certtool if a new enough gnutls is present - Prevent a client crash if the daemon somehow sends invalid data - Reboot after scheduling using logind not systemd - Use the right encoding for the label in make-images - Added/backported enable_pkcs7_when_testing_only.patch: + needed to disable pkcs7 test during build (can be removed for fwupd >= 1.0.9)- Update hasbang in installed files from /usr/bin/env python3 to /usr/bin/python3.- Update url - Small packaging cleanup with spec-cleaner- Update to version 1.0.6: + New Features: - Add bash completion for fwupdmgr. - Add support for newest Thunderbolt chips. - Allow all functions that take device arguments to be prompted. - Allow devices to use the runtime version when in bootloader mode. - Allow overriding ESP mount point via conf file. - Delete any old fwupdate capsules and efivars when launching fwupd. - Generate Vala bindings. + Bugfixes: - Allow ctrl-d out of the prompt for devices. - Allow to create package out of provided binary. - Correct handling of unknown Thunderbolt devices. - Correctly detect new remotes that are manually copied. - Fix a crash related to when passing device to downgrade in CLI. - Fix running the self tests when no fwupd is installed. - Fix Unifying signature writing and parsing for Texas bootloader. - Only send success and failure reports to the server. - Use a CNAME to redirect to the correct CDN for metadata. - Use a longer timeout when powering back the Thunderbolt device.- Ensure library package has a dependency on main package, otherwise it won't be usable.- Update to version 1.0.5: + New Features: - Offer to reboot when processing an offline update. - Report the efivar, libsmbios and fwupdate library versions. - Report Thunderbolt safe mode and SecureBoot status. - Show the user a URL when they report a known problem. - Support split cabinet archives as produced by Windows Update. + Bugfixes: - Be more careful deleting and modifying device history. - Clarify which devices don't have upgrades. - Ensure the Thunderbolt version is xx.yy. - Fix a daemon warning when using fwupdmgr get-results. - Fix crasher with MST flashing. - Fix DFU detach with newer releases of libusb. - Include the device VID and PID when generating the device-id. - Set the RemoteId when using GetDetails. - Stop matching 8bitdo DS4 controller VID/PID. - Use help2man for dfu-tool and drop docbook dependencies. - Use ngettext for any strings with plurals. - Use the default value if ArchiveSizeMax is unspecified.- Update to version 1.0.4: + New Features: - Add D-Bus methods to get and modify the history information. - Allow the user to share firmware update success or failure. - Ask the user to refresh metadata when it is very old. - Store firmware update success and failure to a local database. + Bugfixes: - Add a device name for locked UEFI devices. - Allow each plugin to opt-in to the recoldplug action. - Fix firmware downloading using gnome-software. - Fix UX capsule reference to the one specified in efivar. - Never add two devices to the daemon with the same ID. - Rescan supported flags when refreshing metadata. - Add pkgconfig(json-glib-1.0) BuildRequires: new dependency.- Update to version 1.0.3: + New Features: - Add a new plugin to add support for CSR "Driverless DFU". - Add initial SF30/SN30 Pro support. - Support AppStream metadata with relative URLs. + Bugfixes: - Add more metadata to the user-agent string. - Block owned Dell TPM updates. - Choose the correct component from provides matches using requirements. - Do not try to parse huge compressed archive files. - Fix a double-free bug in the Udev code. - Handle Thunderbolt "native" mode. - Use the new functionality in libgcab >= 1.0 to avoid writing temp files.- Unbreak compilation on non-x86, upstream renamed options to disable plugins.- Update to version 1.0.2: + Add a plugin for the Nitrokey Storage device + Add support for the original AVR DFU protocol + Allow different plugins to claim the same device + Allow quirks to set common USB properties + Move a common plugin functionality out to a new shared object + Optionally delay the device removal for better replugging + Set environment variables to allow easy per-plugin debugging + Use a SHA1 hash for the internal DeviceID + Add quirk for AT32UC3B1256 as used in the RubberDucky + Disable the dell plugin if libsmbios fails + Don't register for USB UDev events to later ignore them + Fix a possible buffer overflow when debugging ebitdo devices + Fix critical warning when more than one remote fails to load + Fix DFU attaching AVR32 devices like the XMEGA + Ignore useless Thunderbolt device types + Refactor ColorHug into a much more modern plugin + Release the Steelseries interface if getting the version failed + Remove autoconf-isms from the meson configure options + Show a nicer error message if the requirement fails + Sort the output of GetUpgrades correctly - Changes from version 1.0.1: + Add support for HWID requirements + Add support for programming various AVR32 and XMEGA parts using DFU + Add the various DFU quirks for the Jabra Speak devices + Allow specifying the output file type for 'dfu-tool read' + Move the database of supported devices out into runtime loaded files + Support the IHEX record type 0x05 + Use help2man to generate the man page at build time + Use the new quirk infrastructure for version numbers + Catch invalid Dell dock component requests + Correctly output Intel HEX files with > 16bit offset addresses + Do not try to verify the element write if upload is unsupported + Fix a double-unref when updating any 8Bitdo device + Fix crash when enumerating with Dell dock connected but with no UEFI + Fix uploading large firmware files over DFU + Format the BCD USB revision numbers correctly + Guess the DFU transfer size if it is not specified + Include the reset timeout as wValue to fix some DFU bootloaders + Make the error message clearer when sans fonts are missing + Support devices with truncated DFU interface data + Use the correct remote-specified username and passord when using fwupdmgr + Use the correct wDetachTimeOut when writing DFU firmware + Verify devices with legacy VIDs are actually 8Bitdo controllers - Add help2man as BuildRequires.- Fix dependencies and build options for non-x86 architectures. At least FW updates for USB are arch independent, and EFI FW updates can also be applied on Aarch64.- Update to version 1.0.0: * Add the plugin documentation to the main gtk-doc * Add a waiting-for-auth daemon state * Add fwupd_remote_get_checksum() to use in client programs * Generate the LD script from the GObject Introspection data * Prevent fwupd from mounting filesystems * uefi: Do not use system-specific infomation for PCI devices * uefi: Support uploading the firmware splash image * dell: only set coldplug delay when we know we need it * dell: only run SMI to toggle host MST GPIO on systems with host MST * dell: add functionality to blacklist HW with problems * dell: only run on intended chassis * thunderbolt-power: always run after thunderbolt plugin * Allow plugins to depend on each other * Add support for SMBIOSv3 * dell: prefer to use hwids to get DMI keys and DE table * debian: remove /etc/fwupd.conf on upgrade * unifying: Use fu_plugin_check_supported() * Add fu_plugin_check_supported() * unifying: Use a device whitelist to avoid breaking devices * Fix various printing issues with the progressbar * dell: Fix a trivial whitespace issue * Do not fail to load the daemon if cached metadata is invalid * Do not store the newest release as part of the FuDevice object * Add a method to return a list of upgrades for a specific device * Move the downgrade calculation to the daemon * Make FuDevice derive from FwupdDevice rather than FwupdResult * Add a command 'clear-offline' to fwupdmgr * Merge releases where multiple remotes provide the same firmware * Remove the UniqueID property * uefi: Do not set the release version * udev: Do not match USB devices, even with a GUID set * Use the intel-wmi-thunderbolt kernel module to force power * dell: drop thunderbolt force power code * unifying: Add hardcoded summaries for peripheral kinds * Create CODE_OF_CONDUCT.md * Ensure more devices set the device summary * Add an 'Summary' property to each device * Add a human-readable title for each remote * unifying: Disable if the kernel has no CONFIG_HIDRAW support * Move deprecated symbols to a new header * Introduce an s390x cross compile target to CI * Add ModifyRemote as an easy way to enable and disable remotes like the LVFS * Do not auto-open all USB devices at startup * dfu: Use FuDeviceLocker * unifying: Use FuDeviceLocker * colorhug: Use FuDeviceLocker * ebitdo: Use FuDeviceLocker * altos: Use FuDeviceLocker * steelseries: Use FuDeviceLocker * usb: Use FuDeviceLocker * Add FuDeviceLocker to simplify device open/close lifecycles * dfu: Remove DEVO support * dfu: Remove the now-unused symtab support * Remove the ELF support from libdfu and move the code to the altos plugin * Use -Werror when building in Travis CI * Do not install the libdfu helper library * Parse the SMBIOS DMI table directly * usb: Disable the fallback USB plugin * Test for missing language translations at build time * Fix the libdfu self test failure on s390 and ppc64- Update to version 0.9.8: * Add a command 'clear-offline' to fwupdmgr * Do not fail to load the daemon if cached metadata is invalid * Fix a crash when using fu_plugin_device_add_delay() * Fix the libdfu self test failure on s390 and ppc64 * Format the BCD USB revision numbers correctly * Never fallback to an offline update from client code * Prevent fwupd from mounting filesystems * dfu: Allow flashing when the target does not specify an alt-name * dfu: Do not try to verify the element write if upload is unsupported * dfu: Fix uploading large firmware files * dfu: Include the reset timeout as wValue to fix some hardware * dfu: Set the vendor ID to the runtime USB VID * dfu: Use 0x0101 as an alias for 0x0110 * thunderbolt: move test for mock environment (gh#hughsie/fwupd#280) * udev: Do not match USB devices, even with a GUID set * uefi: Do not set the release version * unifying: Disable if the kernel has no CONFIG_HIDRAW support- Update to version 0.9.7: + 10 months worth of bugfixing, integrating more vendor specific Firmware update paths.- Update to version 0.8.1: + Delete duplicate translations (gh#hughsie/fwupd#89). + Do not hardcode docbook2man path. + Fix fwupdmgr timeout with missing pending database. + Fix compiler warnings. + Fix a crash when enumerating devices on a Dell WLD15. + dell: don't initialize libsmbios on unsupported systems. + Do not fail to start on Dell hardware. + Adjust systemd confinement restrictions. + Do not dlclose modules when running under valgrind. + Really remove the NoNewPrivileges systemd confinement. + Release fwupd 0.8.1.- Update to version 0.8.0: + Show a different error when checking for updates while on + battery power (gh#hughsie/fwupd#68). + Clarify the test in --help and man page related to offline + (gh#hughsie/fwupd#69). + libdfu: Use a heuristic for the start address if the firmware + has no DfuSe footer. + dell: Don't return the address of a stack variable. + dell: Fix a possibly-impossible-to-hit buffer overrun. + close USB devices before error returns (gh#hughsie/fwupd#73). + Make libelf support optional. + Always make sure we're getting a C99 compiler. + Fix redeclaration of polkit autocleanup functions. + Uncomment SystemdService parameter in the dbus service file + (gh#hughsie/fwupd#74). + Make all providers and plugins share a GUsbContext. + Unexport libebitdo. + Move the plugins into plugin-specific directories. + Convert the providers to plugins to simplify code and for + future features. + Add support for Logitech Unifying devices. + Add a set of vfuncs that are run before and after a device + update. + Return the pending UEFI update when not on AC power. + Move the UPower functionality to a plugin. + Fix udev plugin loading. + fix dfu plugin loading. + Disable PrivateNetwork on systemd service. + Use more restrictive settings when running under systemd. + dell: add a new method for forcing a controller to flash mode. + Add VerifyUpdate to update the device checksums server-side. + Move the Option ROM parsing to the Udev plugin. + Move the device add delay to shared code. + Add initial skeleton for Intel Thunderbolt support. + unifying: Use the actual bootloader VID/PIDs when in firmware + mode. + Allow the metadata to match a version of fwupd and the existing + fw version. + Add fwupd_result_get_device_version_bootloader(). + Fix the appstream-glib version guards. + dell: Add coldplug methods to let other plugins turn on + TBT/GPIO. + libdfu: Don't read data from some DfuSe targets. + Add the ability to run a prepare->exec->cleanup on coldplug. + Allow plugins to request that all plugins re-coldplug. + thunderbolt: Detecting new devices and add an actual device to + the daemon. + Add support for flashing the ChaosKey. + thunderbolt: add some guards around empty arrays. + dell: Adjust the coldplug preparation and cleanup sequence. + dell: Fix possible linker problem. + Revert "thunderbolt: add some guards around empty arrays". + Add fu_plugin_set_coldplug_delay() to allow hardware to + initialize if required. + altos: Add error checking when using termios. + ebitdo: Subclass FuDevice like the altos plugin. + altos: Set the flags in the init_real so they work for the + cmdline tool. + unifying: Subclass FuDevice like the altos plugin. + Include all debug messages when run with --verbose. + dell: introduce a standalone (noinst) tool to force mode + flashes. + Introduce plugin for Synaptics MST hubs. + synapticsmst: Add cascade support. + Only register the D-Bus service when all devices have been + added. + synapticsmst: Refactor away the global state. + synapticsmst: fix cascade support in the plugin. + Updates for thunderbolt plugin. + thunderbolt: Add special handling for safe mode on Dell systems + (gh#hughsie/fwupd#84). + synapticsmst: Iterate all nodes rather than hardcoding to 3. + synapticsmst: build GUID using dock type. + Add a new function fu_dell_supported to fu-dell-common. + synapticsmst: add a test suite. + synapticsmst: Fix up some trivial whitespace issues. + Fix a refcounting issue in the udev plugin. - Add rpmlintrc untill security review is resolved- Update to version 0.7.5: + Clean up PO files + Verify devices support updating in mode they are called. + Fix an assert when unlocking the dummy ESRT device + Don't create the UEFI dummy device if the unlock will happen on + next boot + dell: Match on TB16 as well + Fix a -fstack-protector-strong crash when uploading firmware + Enable the stack protection in local builds + dell: If running in test suite, don't try to get product ID + from sysfs + libfdfu: Show a warning when getting the alt-name failed + dfu: Fix listing devices using the ST reference bootloader + Show the nicely formatted target name for DfuSe devices + libdfu: Fix two possible critical warnings for corrupt USB + descriptors + libdfu: Correctly offset addresses when one zone has multiple + sectors + libdfu: Do not do GetStatus on dfuse upload + libdfu: Fix uploading from DfuSe devices + libdfu: Use the device offset when writing DfuSe firmware + libdfu: Add DfuAction enumerated value to represent a device + action + libdfu: Use an animated progress bar when performing DFU + operations + libdfu: Do not do a zero-byte download when in DfuSe mode + libdfu: Fix verification of written DfuSe firmware + libdfu: Ensure the device is open before claiming the interface + libdfu: Ensure the mode is set correctly when faking a runtime + libdfu: Re-get the quirks when the DfuDevice gets a new + GUsbDevice + libdfu: Add quirks for HydraBus as it does not have a DFU + runtime + libdfu: Match the device booloader or runtime VID and PID when + checking firmware + Add a 'replace-data' command to dfu-tool + string + libdfu: Add dfu_sector_get_zone() to get the continuous memory + zone number + libdfu: Wait for DNBUSY to be cleared when checking the DfuSe + status + libdfu: Correctly erase DfuSe devices + Enable hardening flags on more binaries + libdfu: Correctly set the element address when uploading from + DfuSe devices - Add pkgconfig(gmodule-2.0) BuildRequires: Align with what + configure checks for. - Add pkgconfig(libsmbios_c) BuildRequires: Support dell bios. + Unfortunatly, until we have fwup packaged and enabled, this will + not work. - Add disabled pkgconfig(libtbtfwu): For future thunderbolt + support.- Update to version 0.7.4: + Add a fallback for older appstream-glib releases + Write the ELF files with the correct section type + Fix libfwupd self tests when a host-provided fwupd is not + available + Add dfu_firmware_add_symbol() + Add the Altos symbol table to the DfuFirmware + Use the symtab to set the VID/PID from Altos IHEX firmware + images + Show the human-readable version in the 'dfu-tool dump' output + Allow specifying the argument to 'dfu-tool set-release' in + major.minor format. + sections + Support writing the IHEX symbol table + call + Load the symbol table from ELF firmware + Load the Altos USB descriptor from ELF files + Add DFU_CIPHER_KIND_RSA + Fix a possible crash when uploading firmware files using libdfu- Update to version 0.7.3: + build: Fix gtk-doc build when srcdir != builddir + In get-details output, display the blob filename + Ensure the update ID is set when getting local firmware details + Use a private gnupg key store + Add support for installing against multiple devices from a CAB + file + Use the correct firmware blob when installing a composite + device update + in get-details output, display update_name rather than Unknown + Device + statements + Don't make failures critical while checking versions or locked + state + Show a more detailed error when installing firmware on the + wildcard + Add Dell TPM and TB15/WD15 support via new Dell provider. + file + Allow blacklisting devices by their GUID + header file + Add XPS 9250 to Dell TPM modeswitch blacklist + Only display flashes left in results output when it gets low. + Add a small library for talking with 0bitdo hardware + Add another compile warning and fix up any build failures + Embed fwupd version in generated libfwupd and libdfu + documentation + Update fwupdmgr manpage for new commands and arguments + build: Fix gtk-doc build when srcdir != builddir + online not offline + Get the firmware version correctly from 0Bitdo gamepads + Switch to the Amazon S3 CDN for firmware metadata + Fix writing 8Bitdo device firmware + be updated + Show the vendor flashing instructions when installing + Split out the DFU file formats to separate files + Add fwupd_result_remove_device_flag() + Add FU_DEVICE_FLAG_NEEDS_BOOTLOADER + get-updates output + Allow providers to export percentage completion + Add fwupd_client_get_status() + Handle the 8Bitdo bootloader in a better way + Show a progress notification when installing firmware + Add fwupd_result_get_unique_id() + Use the SHA1 hash of the local file data as the component + origin + Use the correct define prefix for FwupdDeviceFlags + libdfu: Fix hang when parsing corrupt IHEX files + Add a set-target-size command to dfu-tool + Support the 'DEVO' cipher kind in libdfu + Add a set-address command to dfu-util + Disable the Dell specific code by default + Conditionally enable all providers based upon what's installed + Add a summary of providers that are enabled from configure + Do not use the deprecated GNOME_COMPILE_WARNINGS + Ignore devices that do not add at least one GUID + Do not attempt to add DFU devices not in runtime mode + Save the unique ID in the pending database + libdfu: Add initial ELF reading and writing support + Add dfu_firmware_format_from_string() + Normalize the DfuFirmwareFormat enums- Update to version 0.7.2: + Allow devices to have multiple assigned GUIDs + Only return updatable devices from GetDevices() + Add fu_device_get_alternate() + Allow metainfo files to match only specific revisions of + devices + Re-read flags for a device after a provider's unlock routine is + done + Test for a locked device when trying to install firmware update + Enforce allowing providers to take away flash abilities + Support returning multiple GUIDs from GetDetails + Add a GetDetailsLocal() method to eventually replace + GetDetails() + break + libdfu: Add DfuVersion enumerated values + libdfu: Show the DFU protocol version in 'dfu-tool list' + Only claim the DFU interface when required- Update to version 0.7.1: + Fix libdfu CRC check for big endian architectures + Add dfu_image_get_element_default() + Fix libdfu CRC check for big endian architectures + Fix big endian issues when reading and writing DFU and DfuSe + files + Remove non-interactive pinentry setting from fu-keyring + Set the system's DMI product name as the DisplayName for UEFI + Re-order output of get-devices to be easier to read + Make the device display name nicer + update version + Return all update descriptions newer than the installed version + Add summary and name field for Rival SteelSeries + Fix a critical warning when restarting the daemon + Add a 'supported' flag to the FuDevice + Add fwupd_client_connect() + Add a 'monitor' debugging command for fwupdmgr + Add device-added, device-removed and device-changed signals + Match the AppStream metadata after a device has been adedd + Re-match devices when the AppStream metadata is updated + Show 'Unknow Device' in fwupdmgr when a device name is not set + Set the device description when parsing local firmware files + Add support for a new device field "Flashes Left". + src/Makefile.am: reshuffle so enableable bits are only + referenced when on + Add support for a --force flag to override provider warnings- Update to version 0.7.0: + Use g_usb_context_wait_for_replug() + Run vendor plugins as required + Add a plugin for SteelSeries hardware + Add fwupd_device_flag_to_string() + Return the device flags when getting firmware details + Show device flags in 'fwupdmgr get-devices' + Add fwupd_trust_flag_to_string() + Export FwupdUpdateState in libfwupd + Export FwupdUpdateFlags in libfwupd + Add FwupdResult to libfwupd + Add a self test framework for libfwupd + Add FwupdClient to libfwupd + Use FwupdClient from libfwupd in fwupdmgr + Use libfwupd inside the daemon + Emit a FwupdClient::changed when the daemon emits this signal + Rename some of the new libfwupd API to align with the D-Bus + names + libdfu: Fix up some NULL/FALSE confusion + libfwup: Fix up some NULL/FALSE confusion + FwupdClient + Allow other checksum kinds in FwupdResult + Allow SHA-256 hashes when verifying + Show the checksum kind in the fwupdmgr output + Add Alienware to the version quirk table + Do not use /tmp for downloaded files + Add fwupd_result_has_device_flag() + Do not return updates that require AC when on battery + Connect to UPower at startup + Test that GPG key import actually was successful (or didn't + change a key already in the keyring) + Use g_auto() in FuKeyring + Return errors of the correct type when using libfwupd + Allow overridding the location of the pending database for + test suite + Allow overriding the location of the provider offline files for + test suite + Validate that the dbus system bus is available before running + libfwupd tests + Update README.md for changes that have happened in the project + Add some basic explanation of how to use fwupd with various + frontends + Split out the libdfu-devel package + Revert "Allow overridding the location of the pending database + for test suite" + Revert "Allow overriding the location of the provider offline + files for test suite" + Allow the test suite to run in %check + Generate gtk-doc documentation for libfwupd- Update to version 0.6.3: + Require AC power before scheduling some types of firmware + update + Install the hardcoded firmware AppStream file + Correct the BCD version number for DFU 1.1 + Add an unlock method for devices + Add ESRT enable method into UEFI provider. + Only read PCI OptionROM firmware when devices are manually + unlocked + Do not use deprecated API from libappstream-glib + Ignore the DFU runtime on the DW1820A + Export the attribute and quirk values in libdfu + Show ignored DFU devices in dfu-util, but not in fwupd + Allow defining update vfuncs with no runtime support + Revert "Allow defining update vfuncs with no runtime support" + Add a simple plugin infrastructure- Update to version 0.6.2: + Add 'Created' and 'Modified' properties on managed devices + Fix get-results for UEFI provider. + Support vendor-specific UEFI version encodings + Move quirks directly into a single table and file.- Update to version 0.6.1: + Only dump the profiling data when run with --verbose + Always persist ColorHug devices after replug + Do not misdetect different ColorHug devices- Update to version 0.6.0: + Add support for updating USB devices with DFU + libdfu: Add support for DfuSe firmware + libdfu: Generate gtk-doc documentation + libdfu: Don't rely on specific hardware to be present + libdfu: Move the VID:PID checks from the tool to DfuDevice + libdfu: Use a custom error domain + Use the same device identification string format as Microsoft + libdfu: Fix crash when setting a target size + libdfu: Allow setting the alternate settings in DfuSe firmware + libdfu: Add a merge command to dfu-tool + libdfu: Allow choosing a different alt-setting when downloading + libdfu: Fix a crash when setting a NULL image name + libdfu: Correctly implement auto-boot in dfu_device_download() + libdfu: Check for extra args to dfu-tool convert + libdfu: Call the progress callback when doing detach + Ignore the DFU device detach:attach when verifying + libdfu: Require a --force flag to flash wildcard firmware + Use new API available in fwup 0.5 + libdfu: Make the element address 32 bits in size + libdfu: Support the ST-specific bitCanAccelerate + libdfu: Only do a Detach notification if we're actually doing to do it + libdfu: Use the progress bar for all uploads and downloads + libdfu: Improve the output of 'dfu-util list' + libdfu: Support download and upload to ST DfuSe devices + libdfu: Fix multi-interface devices like the Neo Freerunner + libdfu: Add a pkgconfig file + libdfu: Use signals to propagate device state + libdfu: Add a context object to handle device hotplug + libdfu: Add an example showing GObject Introspection + libdfu: Do not ref DfuDevice in DfuTarget so the auto-close + logic works + Close DFU devices as soon as possible after the transfer has completed + Emit the changed signal after doing an update + Rescan the DFU device after replug to get the new version + libdfu: Add dfu_context_get_device_by_platform_id() + libdfu: Add dfu_device_get_runtime_release() + libdfu: Add dfu_device_get_display_name() + libdfu: Fix self tests after recent API change + Split out the DFU provider as a new file + libdfu: Copy the platform ID and invalidate the GUsbDevice when removed + libdfu: Accept multiple spaces after the DfuSe sector name + libdfu: Verify the GUsbDevice is set before using it + libdfu: Remove the weak pointer when destroying the DfuTarget + libdfu: Fix dfu_device_wait_for_replug() so it can work with a DfuContext + Export the AppStream ID when returning device results + Rescan the DFU device after firmware has been updated + libdfu: Handle cancellation with ctrl+c in dfu-tool + libdfu: Add a quirk to support DFU runtime-less devices + libdfu: Add an explicit 'attach' method + libdfu: Add dfu_firmware_get_image_by_name() + libdfu: Make reading and writing to targets easier to + understand + Fix compile with --disable-shared + libdfu: Display all the files shown with 'dfu-tool dump' + libdfu: Fix a few crashers found using afl + libdfu: Fix another bug discovered by the fuzzer + libdfu: Add commands to encrypt and decrypt firmware images + libdfu: Show better device errors + libdfu: Add DfuCipher which is a property on a target and a + firmware file + libdfu: Add support for the draft 'DFU Metadata Table + Specification' + libdfu: Only enumerate the DfuContext when required + libdfu: Fix several reported crashes in the inhex32 import code + Release fwupd 0.6.0- Update to version 0.5.4: + Fix compile error against fwupdate git due to dropped + functions. + Use strerror() when printing errors from libfwupdate + Use new API available in fwup 0.5 + Release fwupd 0.5.4- Update to version 0.5.3: + Avoid seeking when reading the file magic during refresh + Do not assume that the compressed XML data will be NUL + terminated + debugging + Use the correct user agent string for fwupdmgr + Release fwupd 0.5.3- Update to version 0.5.2: + Ensure D-Bus remote errors are registered at fwupdmgr startup + Show the dotted-decimal representation of the UEFI version + number + require appstream-glib 0.5.1 + not found + When the version is from the 'FW' extension do not cache the + device + Support cabinet archives files with more than one firmware + Add the update description to the GetDetails results + Add profiling data to debug slow startup times + Fix verify-update to produce components with the correct + provide values + Clear the in-memory firmware store only after parsing a valid + XML file + Release fwupd 0.5.2- Update to version 0.5.1: + Fix the error message when no devices can be updated + offline update: Use glib api for for reading symlinks + Release fwupd 0.5.1- Update to version 0.5.0: + Do not merge the existing firmware metadata with the submitted + files + Raise the dep on GLib to support and use g_autoptr() + Do not reboot if racing with the PackageKit offline update + mechanism + Release fwupd 0.5.0- Update to version 0.1.6: + Install fwupd and fwsignd into /usr/lib/$(triplet)/fwupd + instead. + Use the new secure metadata URI + Update the offline update service to invoke right command + Don't apply firmware if something else is processing the + offline update + Remove fwsignd, we have the LVFS now + Depend on appstream-glib >= 0.5.0 + Add application metadata when getting the updates list + Simplify the version properties on devices to avoid complexity + and bugs + Release fwupd 0.1.6- Update to version 0.1.5: + Allow fwupd to be autostarted by systemd + Sign the test binary with the correct key + Do not pre-convert the update description from AppStream XML + Devices with option ROM are always internal + Prefer the GUID from the firmware than the device + Allow no arguments to 'fwupdmgr verify-update' and use sane + defaults + Add the ability to remove a vendor on the LVFS site + Fix validation of written firmware + Move the verification and metadata matching phase to the daemon + Add a simple config file to store the correct LVFS download URI + Make parsing the option ROM runtime optional + Add a Raspberry Pi firmware provider + Use the AppStream 0.9 firmware specification by default + Generate the ColorHug test files at runtime + Release fwupd 0.1.5- Update to version 0.1.4: + man/Makefile.am: Add --sgml to docbook2man invocation + Make statements about storing private keys stronger. + Provide a way for clients to add new firmware metadata to the + system cache + Fix fwupd-offline-update.service + Revert "man/Makefile.am: Add --sgml to docbook2man invocation" + Add a Udev firmware provider + Extract the version string from the ROM in PCI devices + Add a 'verify' command that verifies the cryptographic hash of + device firmware + Make the ROM parsing more robust and add self tests + Get the version number out from Intel VBIOS too + Provide a way to dump the option ROM using the command line + build: gusb is required even without colorhug + remove unused variables + Do not return NULL as a gboolean + Fix Intel VBIOS detection on Dell hardware + Do not use the subsystem information when constructing the fake + GUID + Actually parse the PCI option ROM + Accept multiple files at one time when using fwupdmgr dump-rom + verify run + Add a 'verify-update' command to fwupdmgr + Fix trivial bug when parsing firmware versions + Keep hitting the hardware until it gives us enough ROM + Make the version parsing more resilient to corrupt firmware + Fix the example .inf file to reflect reality + Fix ROM PPID searching to work for all ROMs + Move the LVFS website to the fwupd project + Add the ability to create detached signatures + Allow cab files to be saved + Add a simple signing server that operates on .cab files + Automatically download metadata using fwupdmgr if required + Don't call efibootmgr after fwupdate. + Associate the contact email address directly with the vendor + key + Use the actual LVFS GPG key + Allow running fwsignd as the non-root user + metadata + Do not merge existing LVFS metadata + Do not use the file hash when storing the LVFS submitted + firmwares + Move GetUpdates to the daemon + Change the DBus method for installing firmware to 'Install' + Allow installing an offline UEFI update without --offline + Add a 'fwupdmgr update' command to update all devices to latest + versions + 'update' command + Increase the size limit of firmware to 50Mb + Only sign files when the entire file has been copied + Fallback to offline install when calling the update argument. + Reload appstream data after refreshing. + Release fwupd 0.1.4- Update to version 0.1.3: + Coldplug the devices before acquiring the well known name + Add an UNKNOWN status so we can return meaningful enum values + Run the offline actions using systemd when required + Get the firmware version from the device descriptors + Added syntax highlighting + More markup + Support OpenHardware devices using the fwupd vendor extensions + Move boolean properties on the device to a set of flags + Release fwupd 0.1.3- Update to version 0.1.2: + More markup + Fixed typos and markup for executable + Add slovak translation + Add helper code to validate public key signatures + Decompress any firmware signatures in the .cab file + Verify firmware if a detached signature is present + Show the firmware trust status when doing GetDetails() + Only allow signed firmware to be upgraded without a password + Add some guidelines for vendors to README + Small grammar fix + Extract the .cat file alongside the firmware + Release fwupd 0.1.2- Update to version fwupd_0_1_1: + Do not crash when there are no devices to return + Add a 'get-updates' command to fwupdmgr + Add and document the offline-update lifecycle + Create runtime directories if they do not exist + Create a libfwupd shared library + Export the status as an enumerated value rather than a string + Release fwupd 0.1.1- Initial package.mourvedre 1681907456  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~1.7.3-150400.3.5.11.7.3-150400.3.5.11.7.31.7.3 fwupd-1fwupd.hfwupdplugin.hlibfwupdfwupd-client-sync.hfwupd-client.hfwupd-common.hfwupd-deprecated.hfwupd-device.hfwupd-enums.hfwupd-error.hfwupd-plugin.hfwupd-release.hfwupd-remote.hfwupd-request.hfwupd-security-attr.hfwupd-version.hlibfwupdpluginfu-archive-firmware.hfu-archive.hfu-backend.hfu-bluez-device.hfu-cabinet.hfu-cfi-device.hfu-cfu-common.hfu-cfu-offer.hfu-cfu-payload.hfu-chunk.hfu-common-cab.hfu-common-guid.hfu-common-version.hfu-common.hfu-context.hfu-deprecated.hfu-device-locker.hfu-device-metadata.hfu-device.hfu-dfu-firmware.hfu-dfuse-firmware.hfu-efi-common.hfu-efi-firmware-file.hfu-efi-firmware-filesystem.hfu-efi-firmware-section.hfu-efi-firmware-volume.hfu-efi-signature-list.hfu-efi-signature.hfu-efivar.hfu-firmware-common.hfu-firmware.hfu-fmap-firmware.hfu-hid-device.hfu-hwids.hfu-i2c-device.hfu-ifd-bios.hfu-ifd-common.hfu-ifd-firmware.hfu-ifd-image.hfu-ihex-firmware.hfu-io-channel.hfu-plugin-vfuncs.hfu-plugin.hfu-progress.hfu-quirks.hfu-security-attrs.hfu-smbios.hfu-srec-firmware.hfu-udev-device.hfu-usb-device.hfu-volume.hlibfwupd.solibfwupdplugin.sofwupd.pcfwupdplugin.pcFwupd-2.0.girFwupdPlugin-1.0.girfwupdannotation-glossary.htmlapi-index-full.htmlfwupd-FuCfuOffer.htmlfwupd-FuCfuPayload.htmlfwupd-FuContext.htmlfwupd-FuDevice.htmlfwupd-FuDfuFirmware.htmlfwupd-FuFirmware.htmlfwupd-FuIhexFirmware.htmlfwupd-FuPlugin.htmlfwupd-FuProgress.htmlfwupd-FuSrecFirmware.htmlfwupd-FuUdevDevice.htmlfwupd-FuUsbDevice.htmlfwupd-FwupdClient.htmlfwupd-FwupdDevice.htmlfwupd-FwupdPlugin.htmlfwupd-FwupdRelease.htmlfwupd-FwupdRemote.htmlfwupd-fu-archive.htmlfwupd-fu-chunk.htmlfwupd-fu-common-cab.htmlfwupd-fu-common-guid.htmlfwupd-fu-common-version.htmlfwupd-fu-common.htmlfwupd-fu-device-locker.htmlfwupd-fu-device-metadata.htmlfwupd-fu-efi-signature-list.htmlfwupd-fu-efi-signature.htmlfwupd-fu-firmware-common.htmlfwupd-fu-hwids.htmlfwupd-fu-io-channel.htmlfwupd-fu-mutex.htmlfwupd-fu-plugin-vfuncs.htmlfwupd-fu-quirks.htmlfwupd-fu-smbios.htmlfwupd-fwupd-client-sync.htmlfwupd-fwupd-enums.htmlfwupd-fwupd-error.htmlfwupd-fwupd-version.htmlfwupd.devhelp2home.pngindex.htmlintro.htmlleft-insensitive.pngleft.pnglibfwupd.htmlplugin-reference.htmlright-insensitive.pngright.pngstyle.cssup-insensitive.pngup.pngfwupd.depsfwupd.vapi/usr/include//usr/include/fwupd-1//usr/include/fwupd-1/libfwupd//usr/include/fwupd-1/libfwupdplugin//usr/lib64//usr/lib64/pkgconfig//usr/share/gir-1.0//usr/share/gtk-doc/html//usr/share/gtk-doc/html/fwupd//usr/share/vala/vapi/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.suse.de/SUSE:Maintenance:28662/SUSE_SLE-15-SP4_Update/89f7692e61fb502bdc3753005819faa5-fwupd.SUSE_SLE-15-SP4_Updatedrpmxz5ppc64le-suse-linux directoryC source, ASCII textC source, UTF-8 Unicode textpkgconfig fileXML 1.0 document, ASCII textXML 1.0 document, UTF-8 Unicode textHTML document, UTF-8 Unicode textHTML document, UTF-8 Unicode text, with very long linesPNG image data, 16 x 16, 8-bit/color RGBA, non-interlacedHTML document, ASCII textassembler source, ASCII textASCII textC++ source, ASCII textPRR R R RRRPR RRR R RRRRRRRR %1|PZ7'Zq$utf-88991c0f6b2c0dbbc1fde79fc7636de2af6a08cab7143b3e20c9c105cd871dafa? 7zXZ !t/W]"k%X9ikQϴY^#q.BΧc/j)mVk4}UHG -T\;dF" om]?fٶ|tV ef&ui$%rLtVQxofЉb/xKDs;z΅\u}^zӲx9"mmk3 IblO S)!?5_C\%a!=@Wsb!1*Z3p?#x`yzr_߃Jlq;WJ^,&/ "!wV;$ōHq?s ZLز, !LZwU%SsdWq {2 FjMt~*aG( ^Z%a!WݑAIN)PI[->ܭ)($XDvm{x2G7]ֿ!3jsv1LxXF>NmnwSiyʢ.nR Mk%o My="߸^\v( 6. iQuޮZcey~(R_- +YkG8X(9 ̆eI" [񟳝qmF-(K.9$y&֬Bg(?χRw}~xb?~1qY&3+7l{<8&4bPf<$jPb}+@)AH|{X  ;2ߥz8p!vZӅ@q1mu,C "(8&E ;2Kt^R_^W_|n7?FsqŜa5&O<ܯm@GO%&o5X&{N|ҁAc>75mjq2i*Bh:}H|Vb6jfEJe~\ T3l8%ԝ/ i=?O v-sKf"n &MX@B"r%$BZkdM*iO{մ & ׻92vByC7޹r4D2VT,ϱ.qkykRBj!͍Z;홍ztΌ/)= )]̓.<_~NCX zfSPeׁJ+@SwaE&ȹ/չZ+&o<#|Ӊ6) \n3%wPWr]ecGokin7Z-sਫ਼ ҽMrF#`-0)[NtCmy\Dr`$&ı (!/t@ *a٧[}?:ӵ{Ap￶]W0S0]BU3jvwk7}1cp< ,_\v, f-ҴUbl-?}}BNyTIlfgJ;uߑ>4K`J9yxQ?ct^j\3c 67ow*>2!) ,E %AB]Ix;s[t$RxVLvgstE'5pMX9P3B\!Y25с;Ux7qEo Ȫs=dN;J_m~dC ([],* S &[&>g6𥂰QD1X%Fsr^nͺ2ꞥֵӯAĐb _,YB 8a '} 9791gy XdǮK4G{ԨX#wKޡp\)]˝#>7`ZoyZKG5g(t搱zd} ӣ*!tN7 IGՂ$Ad?ToR ,59œ]ɘBff59r .*;[Up)QC?ךcPnHܾ}eI];H fJxt7g-^6p%oLr1#RI@8lzYS.^=UoCI_R`VF "4NB #Xu~xF@/'Zgz95JUgd^TGWIRE$Z~PO6¢|}x_TlgVm`I'^MmrPSJHdISA*K'y\Hw"™|SC1*h~_sXjJ\4ML_ 0C~!3H_Po]pK5n/:W$_zn>V*mCz c=o6:iu vQKM9c]Km!0O] V̻kz sE*^e5gkU;$e Ce$pVȧMF_"_N +$Յ޷YyD1d[q/m1 "rK{L"75*˪*L|1Ň)ѫl &NI(ޑPRk۠dr]>Y;D;3N9|\vbyl=덞#̨z⻅5zd̲T K_Rcw_O~:q&Ca5l3계n3gsRU9zXyܧLXi}fLLw j'ċbI͛^X#>m‹|}ѤNJh?D?Bx@#:dLVuv5,xCO3z$ġHdek%¨$.JB+ymJ{┿'t:d’ӛIB78PIZ.m39Yk&zYpш"^XfFuJJ7$7ciw)([-il8Pgf^U 8gN1 ϊ ]E?+"S`)· Ep  č9xFd pxSp޳Ѕ* >I.?ΰ!NfS;t  [Lx6n ÄqWasߔSqlU E:Rch]%,ڽ}drP-oWzI 7>!Dhð*`ZqΉۻ|Y\3//0~nd<)Ԑ,UIG` W,/k2s,h2B< N֣gTY/I_PL,ྈ^ڔ f~6v h'O7OEN`i+ˇ< YVc,=S=L|p M~hHh`5("{hXv~Qhr*B=`!]A,U_V S=PsCՙx4ڨxop"]qn;W7ۨk6>g dK;5T[A]i G!ms{Yq &؃ &Y|ܰEjO0'@9o)UKԷHL;#Co=&XrژWjFJw>AʚUb<< 4uBQs6 qX8 @;F}?V:ĤFHQq'l֑X?Kx®q`6^KQUJ`+>RN2_.#6$NgGI1iAᱸFy_UgF0&’̾+#"jA-fI0Ȣ0˦ے>wI5\*'RI%WCfߡk咪 19"b(#{?1j(viOR cH#cwR\| 7- 44'$JӵeJS>poDZ;2mP xZYfyŁ#ZIR /-m?xΓ5_>|,^m~Ep[* ]ߞ͝*<aaǮΒpN&ז!׋vB7qa4bX4j)z3KO.TmA [DߵާO)=l~=qBʈ|ap"r71ZAYw.MZ#srklnx<xہbmT]uxev|Mi14uقanݏak Bhuȉ;7YŸ˫+YPo$Gkj/k9>0~\bn(oF݂ٯ׸u>Q a^dR}HAIGFt.Q,gМ/ӠGgxi!w_R~Hc}&~[Og􋅯:FO2Uutڅ) tV\ +K-A+"bOEN@5؈ aKೳLC4 Z8C Y&9. M﷝M搏:t6vX">XSx.UB~JYeY!K] 2Ye35v5LL~6gee5ᔨEFƄ,=k=<6g]#Uxp97+ey#hP+Q;EhD gl<}/^DD2]A ]2#1 ?%ca|J]u-$V{'A:0 vj~a[B*]~ eɄJ8]vQ^,fY?~*=ҷ]B!!|rh2{ޑOIzNH/Hk< -C9Llewv/x]>}KZ#ā{(dc',\8Dڣ-nw13#4r[P\WleVNwo';?QPLkV+3]^_E@w /y=ieo6<6,h]+͆ߤ$1&hQe߷gB lP)753ߏfLeW^EWab u9 i0sbAdގRf𮬠##͢9x1VkccBsEw _FJoh>49J2E _&[< 3/k)WP $}1h⮦'Oh5'r{Χi%uA,`HIO}U1UQ?Quu(9$ohAZH08Z2#hH$ ?2٬mɧ:,"<7dZwhn Hsצo>8#6/&CMaXc jֿ cIP,Å:G"pC!lpE?7FxfB]?+W'~.;W4D@[T>=!A]i}uo˓iڣe1Q4Ǥ,W|(1uF)h|%cٞrM3Aޗ f18GtK,t{!WfVH%\_.T)T-~tdc9XnϟMԠ7~)Kݶ.1% 4Ihwκ1gJ.֦a}!G[ʰu;D{qڣ2"*m"ś%8 7'RQʼn r>wӰaz+\ǀ̡ q4G2Z. ZN.p%xeBZ-UbP+Ѵ My v wBxTwT)fCG76b!$gjtBR;jjh;tp0Juc''t=bLjz/Tmފ3=աEYRՉp= 1=)Qι\Q] Y{N+'nb2w qL.0֔?GKR6C?(@ĤiC9I]3;HԦ!VIi_w)̇ wIyun8<6F!j{I# owG.\פɤ(@@S9&辮쾫 =8.]CjOfؠFWm|vo&Ʃ ,өq쨰s8||wv _0IH<8)'Ę4Qx>N} ?c;"GV-@Z`KY9V a|7{]둻͙ Nt)a,jnzKzuiEÓ9,:_J-GU;]4qYa&E^(5y_bd\3׶J˶Ȧ0gאmɷ',)T*U%!=.m.@o6cDzgYe/,f$?* })T[ 7ؼY,QvٸUGǓ4sCRq.@bv,H)f cRsItv)}v;e0͊>)VX#BC^Y!zQְi|E7ӂ/7*}1{xC+bV3)G u)4z ym6W[JqG@|DPe[?Be4L641Ss51C8 7j*˅Wg"ߍ<+Jyi.x^SU5BX491Mmʹ.zq*%h0ɯӽ2I/$;hՀsx{D\ҥ?O#mAf5T мIQPjʇdг3g| Iz5t=LA,@ WE^OrчCP9\ h]d翳V:حp`M w\( -K$L׍Un {K)fIsjetPbhPNY?J0<})kc|5Sdz_dC`\$="}s@}Zfby=1Bi?4/I^Nމ_H3eH.ÓZ dUgа+~#)C+rj Ƒ(5ȈX-wtjOWeBECQsW8fW+#P%|[~9rb%ĹV󋔂NrO|@ra/38ۆIWdݮ,vLDJFz߆^-G;D$s ඤ2#>qtӹշ9)ͬZ&DCdsxV4Aצr_}?C!"^]>D!\լݟq} 00ڕ-Eˏ "^Dǻ+vwL!oty,e݂ !|*0YOchs҆ۢ%}8Q]v~F’=xb#M"$dl-g>Os|}b>' ["A؇FbyO B~lA,`˸T7XfY0QؕلFjTMa!k ov6Be6Z6ك@J>5˙L{%1 iY|]}D4Prz鉕h9_'M^|-+E," uڶ7ȟb4ܨ]Q^|-=-޺u?LI%sTٽ쎛 f.j;GU'<Ԙ&y]eumD)x7r)mA. Ը|oܢKug"hoJ> ٮ)k2q"I"]Cz<({GHj Ce»-١qkols#{Mi*0L`ޟqA9K@f1/mK`U3 petAVo'b$<;K/U ƚG |?o_IRy.l[hn o#Nbڮz28պ 鴽)X_ TZEx9qbIFgL XbL`0VtVil6A\`9DQ.xPR­l$ˌ@Y;HT>V3v`ө\.qעlmR@h$A#+yӻh:򩐨Ùsv\!R5DsVt6 b_؀*5'I <@i*+[WO=.9(&b"ϑ9s/]zsw/lTGtϔPQ: i&WQaSꥸrt)!w8(7oP9 okDlj  ƻ_ /~bfJL}O8ǛI*\[$Jfh’/bJ~=ӏʬ{wR@utyf$58:G_^HT@|!^vhrGhɡ$`_`6?lih4FJx #Ύ#` (K l:X:Q]1ǰioe!z!|rb${՚B(囬 ƒ J5:*{8bӱhitBX^̬~uhB .j"B@qlwĢ&nz ~'"Y3;J‘8øe*iH@{OC͝rguf:7Cbۼ:hn=)338Җ!e7O/EU{d@\TestYrW20eelYٞ}&Ѯ%䈟GVX6'N\\; ɡH,vmWBV zHzc,sjBxJT|e HZ)?0;{yWwZ$MXVaD~14wJ90Թcb60w'<+eI ^W;dgq'Qݾ}rgSN]gA4|m@OjRln&獴%SA!t EGkg{vZT[ տJ#[8D5i$;aG4$QgfE<<YjT[ ȿ{pN99]-W`@=o){~AڹdJ/2lmi2s?Y";8L-3i ڭL[Qvˆd;/X'\nMG7z+ ifc^ʢ Kp2|L7( {Ŕ/2_Hµ:!J4!:Uw{ѡ dO~.F}#TE9aKIkQ~Λvv4qhn6(F!Y-ԄzϷJS# ;liQޠ4ӈXg*@@ k2u뫴ʬ!ly=#.)Y.KOl#bHңnq1a=ι7_ȧB?dHHnBljc%!"me (D8&V;y&F5 ꄹ1H/fa@=g`/&1˷b SHXv^MiE¦H ^pжO{Aff9:w`!!-tp$=zê`SPyEcZlVy`$"* ,_ jO*A#kC@y|&؝dFeLN[ގW`]q,HVr1zxPY)_ٳycpF(=;k 0 n4x~YJ>E՚5>aRrEz v^AgSHi wV9*dm(?=?>T}L 2ϐj-|28ouJr4=J HTHuaWĐk`NFOQle$}*˝#dXq%8!`% BԲ\XD]3-EfRw\0\ۇ#~^{3K}Cu瀤Byo%*I-UwT3 T_<;%usg60M'طwi@r(iFswnIF.Wf82^kkwomwbʹC({gSkެqŠ#Nd$- `+ .Iu:ݘg616XV{D mBI۹^^ўkRe$ xA&B`FOM,PY2NvsȚ$N' fAZ K;{cb-pY'"umI4 G89K)!6m2t&夝V&M^1;Dc|8kVL;P_ykΤ,@` jȡ$58wH@S;x Bm9C6̡ @^񗲱y--cӌYZӊrTx@Lee͏"l= B-,K0_g35mA ݓku984ͪ( mbܽ{,׳z~>7B_Kx,p.]2G(G֩+jԥhQ8ѭԥ!>%7VHDZ *4?4 !+FېlUm)Pd.69L9-{Cel ,W~Sqb.AUp(7EF_#n/Jh$PpVL!1 ޺@_ut*O+5OcQ7ckA/T"i T8]]ķIIi*OClhEh9:͒C |JBGyO{Sn*Uk2W=>t9KvP4^+%Y=o ]d*?#d;ڀ{KoaXB*Elg087vWXhr8qxf$;"S4’FpepTuZoEE L~:#5T2NvP!ĎڹtVՁ1Da ӆ9Bxu}}ܕ$\AMy+)ZMGQ, eݣ^=!Re:顳 Χ.EB(PIg]}I%etײT2*1έ[45J*%||D&7q ^9 !Ջy$X.nMC@8;I]g Ĉ9\wI4;1X;R vW|kiܱlɃ֨#Kܾ*/ jN bl2j>)hZJ!ʇ/S0II=L#"!Vyʹ-o6Fu~WcQnK=!nBQ4]*~t' uQM5Hٱ JO vh2\Vn }QYsg׉sdπgͧ z.z DK Aܢ6USx¾[ {|,NEbTR31(Z$e{ S3R6rL~䧗k0$s0r |8A]bMŏK{L[,aLUo:|^-2Km꡺@ g HdsX {!ObFJ}md;SUFTlǀnPԤOMk7G>Rϰmp=jYj>|#l(:ki/ِtn(rZʦz$>oƋɲEPްwp]6/Zp;l |dB#nʙ\vUjڤ:P"pYsR+a؉o|,F|]<; @*{P'} I7%i3/ͷW:oG L8X "A픷)ؓj*O}bA:iu"H QF }ެ;D+|yȎ(lQ~Ûw(D:,7? e%R0ow? /qˌyM*CeFe)5'K.>̃=^>/ H&Ywך X$M39aP-t73:کE\b.=EЭ`|c~FS!(# {#v8jBu}A2ћϢM3xٔ1mUdE |a=|(4w[5y Ϋa6)zCP $HIbШu c4|1KyhVq"ft%[ʾcnŷȕ 2 yn4cվn݋!s,~ځ^j&#q iEdmaaY aza4[@]`QOm _>qU! ^~*ȍUPƅq&ϱ ?a7E #2IcBo}k擼ę| (sKC2L赝s,7}B8FdcEp59ذ9E42E~Rg6l U~V~$R2prYE,6eE(d)V\7aZ;x& ](IN^"MVL! J4#)vf7'\B }I Dwnt<>ln9ֆ/i9]X6ŔuRةȑҕs- 9+]ϣ}Gوh0n886Xun ?!yE*4^!ƋtGa GI@=(/Ȓ>xý̵r;7%+fjwx^sWGEpgnvJ<<"k$_}3ƪ_Lw.C2-K."i<$jb>nc,nʝC7{rVlf o& myj {8<ԃJ\ټ*XcjW; +/(Hªq )M_$I;1qCf+)]S蠷 6~^FRWc^Vn7<] T ĂX4PʴW!~Y”{K!,02({5K(~g1<ْD,7tqCQTFX,.ֺ%hW^NFʖ|YƕCӐۤ`d'cݫ9 uo6\CkтYf~o ;r D]@=Kgn[0^ r9)S'(uBEº@s{ J Q yH9E`< vm>kʙAKKCG=ʰzgQ1$~I -P8845zas]~n8XIJ~R'FT'ou&,Cᵧ9LMLq`Qwy%Sj捏y5K݊HD&= GF "؆.B@I麆G"M3wѩȸ uL6 mFl !8INCh9|FK2l*AjZEq p(G׼{d 5 K {r).bc|^g ǽVH ҏ-=*0yə$~{ 1K#Q yÆ9ކrA6`dk)RI\4S{aMJ`\v2E%Z@(mO saVW5*+jĀ\HWJ~O foh%e9Dp. s3B,{,gjfl&ӑdMUeP 38I@I7hTS%{W09 " &t+,g/J;mk GC"Y} ylwj~,KN Ȣ)ۮ3x?o2)x-|- 1Vc>rm\¯6B*4Km(Y5AzJCݝ$r\j\39bV<iA;g&a@MW艚Icy|䙤0Mc-;Qي`釻g yFjQ?9+:$Fe0EH"٫=5#ٮlFZ{j5Ty#<@Ks?|4vB--T|ڷ96#4!gE 꾐h'RQiNܱγc똤20Xݲ"3~&pQ+:7N+1D?$fH{=G "_氟c/GL'L@"Qqj 2]ٻQ}~zDʚۄ(akj+>)E s 3qb=`cYbd.H=w5L8X:w?7/1VR օD[E CE? 8%cmE#`d^׻[)/nv$ 6ɤ }h` Ly QB҈h%F\|~ ?DRve_*;RC W a NނpS݈GOO}KHߋ{N;y:ľ{W>4?IJt0q? 7qWzhJG4|5Щ^SBWMϯ`[Htq קhQJ=JY& }+}(\բmlHd,sΐ>I[. >%ŗ qZ[Oޚj|+F8ܘmif֟" dt'h=Ʒ^H`F08똺䝑~uM}XŚ%ZۊÐ5L`×]"1nZ?D0g̹GhWi36EXZ1De=HlHY,UmEY[qb ve}_~>yD2-ҷd?%LoNRSU ;J8Egݫ͞&9sƗ@u2_m ca|kH.8|oW}nW0?@iLۄ@y}SK9r凊n)YnOᴉ= G0yOg>HB~{s:MrNaٰj@~Z3؟>i ep9 "b$5ħؼ*Ԩv_sb әʛM菍,?9-g岢0/0 3c44SIp4lnEwy^k>ܙ%Б Z#hg˩1ޏH{8z>L>{I ,S(.$ki]_OCF61}2y'W6wֺk$/wKA7GяDBN@6ɠL4]~30 <\MVԥu6r @:qfBL vhêбAp6(]ʒ( Q&c狀L=ϋz?a$?WUlK03!2, L^ӏ_Ss)⧫=^kXzl&-LOh`aH4;:0ԋzL0[f'`"`VR^>VcȰ̻&|n9B umZMHۄٍn=xh| SAh dy4`x<#{2qq~sCuЦ *" vyg62lKRB jYWw5R'sÎeɾY6KleL[j,LAdr[|]onZ/V,.[N5,,-*TD5io򞏋#1O5D>A[6% (c\(O{Z AVlivz\lSMFwI*Q7K`YŘ.0e