% ......   start of pictex file generated by FastPicTeX   ...... 
\beginpicture 
% ......   macros for errorbars   ...... 
\newcommand{\putxerrorbar}[3]{% 
\dimen0=\Xdistance{#1} \dimen1=\Ydistance{#2} \dimen2=\Xdistance{#3} 
\unitlength=1pt \setdimensionmode 
\dimen3=\dimen0 \advance \dimen3 by -\dimen2 
\dimen4=\dimen0 \advance \dimen4 by \dimen2 
\dimen5=\dimen1 \advance \dimen5 by -1mm 
\dimen6=\dimen1 \advance \dimen6 by 1mm 
\putrule from {\dimen3} {\dimen1} to {\dimen4} {\dimen1} 
\putrule from {\dimen3} {\dimen5} to {\dimen3} {\dimen6} 
\putrule from {\dimen4} {\dimen5} to {\dimen4} {\dimen6} 
\setcoordinatemode } 
\newcommand{\putyerrorbar}[3]{% 
\dimen0=\Xdistance{#1} \dimen1=\Ydistance{#2} \dimen2=\Ydistance{#3} 
\unitlength=1pt \setdimensionmode 
\dimen3=\dimen1 \advance \dimen3 by -\dimen2 
\dimen4=\dimen1 \advance \dimen4 by \dimen2 
\dimen5=\dimen0 \advance \dimen5 by -1mm 
\dimen6=\dimen0 \advance \dimen6 by 1mm 
\putrule from {\dimen0} {\dimen3} to {\dimen0} {\dimen4} 
\putrule from {\dimen5} {\dimen3} to {\dimen6} {\dimen3} 
\putrule from {\dimen5} {\dimen4} to {\dimen6} {\dimen4} 
\setcoordinatemode } 
\setcoordinatesystem units <1.8cm,0.025cm> point at 0 0 
\setplotarea x from 0 to 5, y from 50 to 250 
% .......... axis ............ 
\axis bottom label {} ticks numbered from 0 to 5 by 1 / 
\axis left label {} ticks numbered from 50 to 250 by 50 / 
% .......... heading ............ 
\plotheading {} 
% .......... series ............. 
\shaderectanglesoff 
\putrectangle corners at 0.6 50 and 0.866667 105 
\putrectangle corners at 1.6 50 and 1.86667 155 
\putrectangle corners at 2.6 50 and 2.86667 115 
\putrectangle corners at 3.6 50 and 3.86667 85 
\putyerrorbar{0.733333}{105}{10} 
\put {} [b] <0mm,0.5\baselineskip> at 0.733333 115
\putyerrorbar{1.73333}{155}{12} 
\put {} [b] <0mm,0.5\baselineskip> at 1.73333 167
\putyerrorbar{2.73333}{115}{9} 
\put {} [b] <0mm,0.5\baselineskip> at 2.73333 124
\putyerrorbar{3.73333}{85}{8} 
\put {} [b] <0mm,0.5\baselineskip> at 3.73333 93
\shaderectangleson 
\setshadegrid span <1mm> 
\putrectangle corners at 0.866667 50 and 1.13333 165 
\putrectangle corners at 1.86667 50 and 2.13333 210 
\putrectangle corners at 2.86667 50 and 3.13333 150 
\putrectangle corners at 3.86667 50 and 4.13333 130 
\putyerrorbar{1}{165}{17} 
\put {} [b] <0mm,0.5\baselineskip> at 1 182
\putyerrorbar{2}{210}{20} 
\put {} [b] <0mm,0.5\baselineskip> at 2 230
\putyerrorbar{3}{150}{18} 
\put {} [b] <0mm,0.5\baselineskip> at 3 168
\putyerrorbar{4}{130}{12} 
\put {} [b] <0mm,0.5\baselineskip> at 4 142
\shaderectanglesoff%
\dimen0=\linethickness%
\setlength{\linethickness}{\Xdistance{0.266667}}%
\putrule from 1.26667 50 to 1.26667 120 
\putrule from 2.26667 50 to 2.26667 175 
\putrule from 3.26667 50 to 3.26667 135 
\putrule from 4.26667 50 to 4.26667 95 
\setlength{\linethickness}{\dimen0}%
\putyerrorbar{1.26667}{120}{12} 
\put {} [b] <0mm,0.5\baselineskip> at 1.26667 132
\putyerrorbar{2.26667}{175}{16} 
\put {} [b] <0mm,0.5\baselineskip> at 2.26667 191
\putyerrorbar{3.26667}{135}{11} 
\put {} [b] <0mm,0.5\baselineskip> at 3.26667 146
\putyerrorbar{4.26667}{95}{8} 
\put {} [b] <0mm,0.5\baselineskip> at 4.26667 103
\setlinear 
\setsolid 
\plot 1 200 2 250 3 180 4 160 / 
\setsolid 
\putyerrorbar{1}{200}{13} 
\put {} [b] <0mm,0.5\baselineskip> at 1 213
\putyerrorbar{2}{250}{16} 
\put {} [b] <0mm,0.5\baselineskip> at 2 266
\putyerrorbar{3}{180}{9} 
\put {} [b] <0mm,0.5\baselineskip> at 3 189
\putyerrorbar{4}{160}{8} 
\put {} [b] <0mm,0.5\baselineskip> at 4 168
\put {$\bullet$} at 1 200 
\put {} [b] <0mm,0.5\baselineskip> at 1 200
\put {$\bullet$} at 2 250 
\put {} [b] <0mm,0.5\baselineskip> at 2 250
\put {$\bullet$} at 3 180 
\put {} [b] <0mm,0.5\baselineskip> at 3 180
\put {$\bullet$} at 4 160 
\put {} [b] <0mm,0.5\baselineskip> at 4 160
\endpicture 
% ......   end of pictex file generated by FastPicTeX   ......